Specifications

Accessories
Other Products
7-9© Siemens Switzerland Ltd 2011
7
Type Order No.
ACK5100
SiPass integrated parameterization cable
ACK5100 is used to create a serial connection between a PC and the
AC5100 advanced central controller for configuration.
6FL7820-8FB10
ACK5110
SiPass integrated modem cable
ACK5110 is used to create a serial connection between the AC5100
advanced central controller and a modem using a DB25 connector.
6FL7820-8FB11
AAD4011-HF
SiPass Entro cable‚ halogen free‚ 100 m
AAD4011-HF is a special cable for SiPass Entro designed to simplify sys-
tem cabling. It contains 3x twisted pairs. The larger diameter pair is for
power and two smaller diameter pairs are for data. This cable has excel-
lent electrical properties with respect to minimising voltage drops asso-
ciated with long cable runs.
S54513-K6-A1
ACS6311
I/O board for ARS6311-RX
The ACS6311 I/O board is required for standalone operation of the
ARS6311-RX card reader. When an ARS6311-RX card reader is config-
ured for standalone operation (offline mode)‚ it can independently con-
trol access via a single door. A standalone access control installation
can contain one ARS6311-RX reader (to monitor entries only) or two
ARS6311-RX readers (one for entries and one for exits).
Current consumption 100 mA (both relays activated)
Inputs 2 NO/NC inputs‚ internal pull-up
Outputs 2 relay outputs‚ NO/NC dry contact‚
Form C 1.5 A / 24 VDC/AC rated
Card capacity 120
Operating temperature -25 to +60 °C
Weight 0.05 kg
Dimensions (W x H x D) 66 x 89 x 29 mm
Approval CE
S24246-Z4501-A1