Specifications

SiPass integrated
Controllers
4-18 © Siemens Switzerland Ltd 2011
Type Order No.
AC5160
SiPass integrated controller kit
The AC5160 kit consists of an AC5100 controller and two dual-reader
interfaces (DRI) in one enclosure. The components and a power supply
are pre-assembled and wired.
The architecture of the housing and the included accessory kit allows
for an easy and quick installation. As all modules are pre-assembled
only the connection to the power supply and the readers has to be
established. The enclosure includes cable ducts with strain relief to ena-
ble easy wiring with external connection points.
Additional space in the enclosure makes it possible to add extra SiPass
integrated components. For example‚ it is possible to add up to four
additional DRIs for a total of 12 readers. Depending on the extension an
additional power supply might be required. In this case‚ the two power
supplies will then operate in master/slave mode. The integrated tamper
switch can be used to monitor the opening of the enclosure‚ which can
then be configured as an alarm message in SiPass integrated.
Kit includes 1 x Advanced Central Controller
(AC5100)
2 x Dual Reader Interface modules
(ADD5100)
1 x Power supply
1 x Enclosure
Supplied with 230 VAC-24 VDC power supply with
battery backup option.
Additional components ACK5100 diagnostic/parameteriza-
tion cable‚ ACK5110 cable for
modem connection
Operating voltage 24 VDC (-10 / +20%)
Current consumption 1.2 A @ 230 VAC per power pack
(including battery charging)
Alarm input 1 x Tamper input
(internally supplied‚ unsupervised)
Alarm output 1 x Alarm output
(externally supplied MOSFET
switch‚ max 12V‚ 100 mA)
Door capacity 96
Card capacity 500‚000
Indicators FLN communication‚ Modem‚ Sta-
tus‚ Battery‚ Ethernet‚ Compact
Flash
LCD Display None
Keypad None
Tamper switch Integrated
Operating temperature -10 to +55 °C
Environment Indoor use only
IP rating IP30
Housing Steel
Colour Grey
Dimensions (W x H x D) 500 x 750 x 200 mm
Weight 21.3 kg
Approval CE
6FL7820-8BA16