Specifications

SiPass integrated
Door Modules
4-20 © Siemens Switzerland Ltd 2011
Type Order No.
ADS5200
Single reader interface module including base plate
The ADS5200 provides a Clock&Data/Wiegand interface between a card
reader and the advanced central controller (AC5100‚ ADS5102 or
AC5200) for one card reader. When a cardholder presents an access
card at an entry or exit reader the ADS5200 reader interface interprets
the encoded information and sends this data to the controller. The con-
troller then checks the validity of the cardholder‚ and if the appropriate
permissions have been assigned‚ the controller sends a message back
to the reader interface allowing it to unlock the door and provide pas-
sage. It can also report the status of the door (locked or unlocked) at
any time.
Note: The ADS5200 does not have an RS485 interface for card readers.
It supports Clock&Data and Wiegand readers only.
Interface FLN connection to controller: RS485
To readers:Clock&Data or Wiegand
port
Operating voltage 12 VDC
±20 %
Power consumption 12 W
Outputs 1 x Lock output relay (30 VDC‚ 2 A)
1x Open-collector output (100 mA‚
12 VDC)
Inputs 1 x REX-button
1 x Door contact
2 x Auxiliary
All inputs unsupervised or super-
vised
Tamper switch Optional‚ auxiliary input
Firmware Flash upgradeable
Indicators Power‚ Activity‚ Communication
Dimensions (W x H x D) 125 x 125 x 34 mm
Weight 0.25 kg
Approval CE‚ UL294‚ C-Tick
6FL7820-8CA20