Specifications

SiPass integrated
Door Modules
4-21© Siemens Switzerland Ltd 2011
4
Type Order No.
ADS5210
Single reader interface module including base plate and plastic
housing
The ADS5210 provides a Clock&Data/Wiegand interface between a card
reader and the advanced central controller (AC5100‚ AC5102 or
AC5200) for one card reader. When a cardholder presents the access
card at an entry or exit reader the ADS5210 reader interface interprets
the encoded information and sends this data to the controller. The con-
troller then checks the validity of the cardholder‚ and if the appropriate
permissions have been assigned‚ the controller sends a message back
to the reader interface allowing it to unlock the door and provide pas-
sage. It can also report the status of the door (locked or unlocked) at
any time.
Note: The ADS5210 does not have an RS485 interface for card readers.
It supports Clock&Data and Wiegand readers only.
Interface FLN connection to controller: RS485
To readers: Clock&Data or Wiegand
port
Operating voltage 12 VDC
±20 %
Power consumption 12 W
Outputs 1 x Lock output relay (30 VDC‚ 2 A)
1x Open-collector output (100 mA‚
12 VDC)
Inputs 1 x REX-button
1 x Door contact
2 x Auxiliary
All inputs unsupervised or super-
vised
Tamper switch Optional‚ auxiliary input
Firmware Flash upgradeable
Indicators Power‚ Activity‚ Communication
Dimensions (W x H x D) 150 x 150 x 76 mm
IP rating IP55
Housing ABS plastic
Weight 0.55 kg
Approval CE
6FL7820-8CA21