Specifications

SiPass integrated
Signal Modules
4-29© Siemens Switzerland Ltd 2011
4
Type Order No.
AFI5100
Input point module including base plate
The AFI5100 is a programmable input controller used as part of a SiPass
integrated system. It provides a local interface between the advanced
central controller (AC5100‚ AC5102 or AC5200) and the devices used
to monitor a facility‚ such as infrared detectors. When an input device
that is connected to an AFI5100 changes status‚ the AFI5100 registers
the status change and forwards this data to the controller. After check-
ing the validity of the data‚ the controller sends the message to the
SiPass integrated server‚ so the alarm-handling mechanism can respond
appropriately.
Interface To controller: RS485
Operating voltage 12 to 24 VAC
±20 %
Power consumption 50 W
Inputs 32 x internally supplied
(supervised or unsupervised)
1 x Tamper (internally supplied)
1 x Fire override
(potential-free or internally sup-
plied)
Outputs 4 x Auxiliary relays (30 VDC‚ 2 A)
1 x Alarm output
(open-collector 12VDC‚ 200 mA)
1 x Fire override relay (30 VDC‚ 2 A)
Firmware Flash upgradeable
Indicators Power‚ Activity‚ Communication
Inputs‚ Output
Peripheral supplies
Fire override
Operating temperature 0 to +50 °C
Dimensions (W x H x D) 250 x 287 x 30 mm
Approval CE‚ UL294‚ C-Tick
Weight 1.35 kg
6FL7820-8CB10