user manual

18
Putting into service
l Logging the mobile unit onto Hicom 300:
u Activate the mobile unit with the On/Off key -
Registrate! is displayed the first time the unit is
logged on or Search Station 1* the second time it is
logged on.
ßx2 Press the function key twice (first logon only) – the main
menu is displayed.
NEXT
Use the left display key
NEXT
to scroll until Settings
Settings
is marked (in upper display line) and press the right
OK
display key
OK
to confirm.
NEXT
Scroll to Registrate with the display key and confirm.
Registrate
OK
Station 1
e.g. confirm Station 1* for logon as system1 – Enter
OK
system code is displayed.
If necessary, select other stations/systems by pressing
NEXT
.
e.g.
123... Enter the system code (8-digit) and confirm with
OK
If necessary, press
ú
to correct entry.
OK
OK
Confirm Registrate at Station 1* with the display
key – if logon is successful, Station 1* is displayed
and the ring symbol also flashes.
l Off status: display clear – calls are not received!
l On status: e.g. Station 1 is displayed – prerequisite for all telephone
features. This is the normal operating status.