Data Sheet for Product

s Industry, Inc.
Building Technologies Division
Fire Safety
8 Fernwood Road
Florham Park, NJ 07932
Tel: (973) 593-2600
FAX: (908) 547-6877
URL:
www.USA.Siemens.com/Fire
(S
II
-FS)
Printed in U.S.A.
Fire Safety
1577 North Service Road
East Oakville, Ontario
L6H 0H6 / Canada
Tel: [905] 465-8000
URL: www.Siemens.CA
November 2016
Supersedes sheet dated 8/15
(Rev. 7)
Cylinder Mounting Straps & Brackets
The steel straps and brackets are used to
mount the cylinders in vertical position:
The brackets, which can be used for wall-
mounting purposes, are secured to adjacent
wall studs.
Liquid Level Indicator
The Liquid Level Indicator operates magnetically,
so there is no need to move or disconnect
cylinders. Uninterrupted hazard protection is a
key feature of the
liquid level indicator.
Additionally, the liquid level indicator is factory
installed.
Low-Pressure Indicating Switch
The Sinorix Low-Pressure Indicating Switch
(Model CPY-PSS1) is a single-pole, single-throw
switch that is mounted to the cylinder valve
during production.
Model CPY-PSS1 will remain in the (NC)
position when no pressure is set against the
switch. In Normal operating position, the Low-
Pressure switch is set at 360 psig. When the
cylinder valve is pressurized, Model CPY-PSS1
will move into the open position.
Upon loss of pressure from the cylinder valve
due to discharge or leakage Model CPY-PSS1
moves to a closed position at 291psig. Model
CPY-PSS1 is monitored by a Supervisory point
on the fire-alarm control panel (FACP). The
FACP provides a Supervisory alarm upon loss of
pressure below the PSIG set point.
Details for Ordering
Model
Part
Number
Description
CPYCS-1200 500-649677BG
1200 Lbs. Wall
Cylinder Strap
CPYCS-1200F
500-649846BG
1200 Lbs. Floor
Cylinder Strap
CPYEC-2-24 500-697990BG
Electronic Supervised
Solenoid
CPY-LMC2 500-697925BG-2
Local Manual
Control Head
CPY-PAS2 500-697926BG-2
Pressure Actuated
Control Head
CPY-1200
CPY-1200-00-2-xxx
Sinorix 227
Fire Suppression System
CPY-1200 CPY-1200-00-3-xxx
Sinorix 1230
Fire Suppression System
Notice: This marketing data sheet is not intended to be used for system design or installation purposes.
For the most up-to-date information, refer to each product’s installation instructions.