Data Sheet for Product

ManualsBrandsSiemens ManualsFire - Dry ExtinguishingCPY-900 / CPY-1200 Cylinder with a 4-Inch Valve Assembly, Data Sheet

[Cylinder / Valve Assemblies – 4” Discharge Port] Sinorix

6623

s Industry, Inc.

Building Technologies Division

CPY-900

Data Sheet

Fire Safety Products

Sinorix

Engineered Fire Suppression Systems

Cylinder / Valve Assembly – 4”[10.2 cm.] Discharge Port

(Includes: Cylinder-Mounting Strap / Bracket; Top-Plug Adapter, Liquid-Level Indicator & Low-Pressure Switch)

Model CPY-900

Product Overview Specifications

Model CPY-900 shall be filled as follows:

Model

Cylinder

Size

Max. Fill at

30 LB/FT

Min. Fill at

70 LB/FT

CPY-900

900

Lbs.

408

Kg.

387

Lbs.

176

Kg.

900

Lbs.

408

Kg.

Model CPY-900 can be filled with HFC-227ea

suppression agent or with 3M™ Novec™ 1230

Fire Protection Fluid. Each cylinder is

pressurized with nitrogen to 360 psig at 70°F

(21.1°C), and is manufactured, tested and

marked in accordance with DOT 4BA500 or

4BW500 specifications for the various sizes.

Model CPY-900 is DOT and Transport Canada (TC)

approved.

Model CPY-900 is fitted with lifting lugs for

convenience in handling, and the base is

designed to distribute the weight across a

floor area of a fully-charged cylinder.

Model CPY-900 cylinder uses a 4-inch (10.2 cm.)

valve outlet designed for victaulic fittings and

pipe only. These pressure-seated valves are

designed for high-flow rates. They also meet

the rapid discharge time specified in NFPA

2001.

Model CPY-900 incorporates a similar design as

the other cylinder valves, and utilizes 304

stainless steel

rather than brass.

The discharge outlet is fitted with an anti-recoil

plug. The anti-coil plug is a safety device to

prevent movement of the cylinder in the event

of discharge – while the cylinder valve is neither

connected to the piping system, nor is securely

fastened to a solid structure.

ARCHITECT AND ENGINEER SPECIFICATIONS

• For use with Sinorix 227 and Sinorix 1230

• High flow-rate valve

• 4-inch (10.2 cm.), discharge-port valve assembly

• Manual, electric or pressure operated

• Liquid-level indicator

• Dept. of Transportation (DOT) and Transport

Canada (TC) Approved

• UL 2166 Listed & ULC Listed;

FM (

5600) Approved

Summary of content (6 pages)

PAGE 1
Data Sheet s Fire Safety Products Sinorix® Engineered Fire Suppression Systems Cylinder / Valve Assembly – 4”[10.2 cm.] Discharge Port (Includes: Cylinder-Mounting Strap / Bracket; Top-Plug Adapter, Liquid-Level Indicator & Low-Pressure Switch) Model CPY-900 ARCHITECT AND ENGINEER SPECIFICATIONS • For use with Sinorix 227 and Sinorix 1230 • High flow-rate valve • 4-inch (10.2 cm.), discharge-port valve assembly • Manual, electric or pressure operated • Liquid-level indicator • Dept.
PAGE 2
Specifications ─ (continued) Valve Controls The 4” (10.2 cm.) valve size accepts the same set of valve controls described below: Electronic Solenoid Valve The optional Electronic Solenoid Valve, which must be ordered separately, opens upon electric energy being applied – thus relieving the pressure above the valve piston and causing the cylinder valve to open. For electrical connections, the Electronic Solenoid Valve is furnished with 24" (61 cm.) pigtails. The pipe plug is removed when the port is used.
PAGE 3
Cylinder Mounting Straps & Brackets The steel straps and brackets are used to mount the cylinders in vertical position: The brackets, which can be used for wallmounting purposes, are secured to adjacent wall studs. Liquid Level Indicator The Liquid Level Indicator operates magnetically, so there is no need to move or disconnect cylinders. Uninterrupted hazard protection is a key feature of the liquid level indicator. Additionally, the liquid level indicator is factory installed.
PAGE 4
Data Sheet s Fire Safety Products Sinorix® Engineered Fire Suppression Systems Cylinder / Valve Assembly – 4”[10.2 cm.] Discharge Port (Includes: Cylinder-Mounting Strap / Bracket; Top-Plug Adapter, Liquid-Level Indicator & Low-Pressure Switch) Model CPY-1200 ARCHITECT AND ENGINEER SPECIFICATIONS • For use with Sinorix 227 and Sinorix 1230 • High flow-rate valve • 4-inch (10.2 cm.
PAGE 5
Specifications ─ (continued) Local Manual Control Head Electric Actuator & Manual Control Combination The Local Manual Control Head (Model CPY-LMC2) is installed on the Supervised Electronic Releasing Solenoid, Model CPYEC-2-24. When the safety pull pin is taken out, and the push button is manually triggered, it will cause a pin to depress and open the pilot check on the valve. Agent pressure is then released above the valve piston. Cylinder Size Valve Size Quantity of Piston Actuators, Max.
PAGE 6
Cylinder Mounting Straps & Brackets The steel straps and brackets are used to mount the cylinders in vertical position: The brackets, which can be used for wallmounting purposes, are secured to adjacent wall studs. Liquid Level Indicator The Liquid Level Indicator operates magnetically, so there is no need to move or disconnect cylinders. Uninterrupted hazard protection is a key feature of the liquid level indicator. Additionally, the liquid level indicator is factory installed.