Data Sheet for Product
[Cylinder / Valve Assemblies – 4” Discharge Port] Sinorix
®
6623
s Industry, Inc.
Building Technologies Division
CPY-1200
s
Data Sheet
Fire Safety Products
Sinorix
®
Engineered Fire Suppression Systems
Cylinder / Valve Assembly – 4”[10.2 cm.] Discharge Port
(Includes: Cylinder-Mounting Strap / Bracket; Top-Plug Adapter, Liquid-Level Indicator & Low-Pressure Switch)
Model CPY-1200
Product Overview
Model CPY-1200 is filled as follows:
Model
Cylinder
Size
Max. Fill at
30 LB/FT
3
Min. Fill at
70 LB/FT
3
CPY-12
00
1200
Lbs.
544
kg.
519
Lbs.
235
kg.
1205
Lbs.
547
kg.
Model CPY-1200 can be filled with HFC-227ea
suppression agent or with 3M™ Novec™ 1230 Fire
Protection Fluid. Each cylinder is pressurized with
nitrogen to 360 psig at 70°F (21.1°C), and is
manufactured, tested and marked in accordance with
DOT 4BA500 or 4BW500 specifications for the various
sizes. Model CPY-1200 is DOT approved.
Model CPY-1200 is produced
with a specially
designed base that provides two functions:
The base allows for a pallet jack to be inserted for
trouble-free handling. Model CPY-1200 has been
designed to pass through standard doorways and
elevators.
The base is also designed to distribute the weight across
a floor area of a fully-charged cylinder.
Specifications
The Model CPY-1200 cylinder uses a 4”-inch (10.2
cm.) valve outlet designed for victaulic fittings
and pipe only.
These pressure-seated valves are designed for
high-flow rates to meet the rapid discharge time
specified in NFPA 2001.
Models CPY-1200, which incorporates a similar
design as the other cylinder valves, utilizes
304
stainless steel
rather than brass.
The discharge outlets are fitted with an anti-recoil
plug. The anti-coil plug is a safety device to
prevent movement of the cylinder in the event of
discharge
– while each cylinder valve is neither
connected to the piping system, nor is securely
fastened to a solid structure.
Valve Controls
The 4” (10.2 cm.) valve size accepts the same set
of valve controls described below:
Electronic Solenoid Valve
The optional Electronic Solenoid Valve opens
upon electric energy being applied
– thus
relieving the pressure above the valve piston and
causing the cylinder valve to open. Solenoids are
furnished with 24" (61 cm.) pigtails.
• For use with Sinorix 227 and Sinorix 1230
• High flow-rate valve
• 4-inch (10.2 cm.), discharge-port valve assembly
• Manual, electric or pressure operated
• Liquid-level indicator
•
UL 2166 Listed;
FM (
#
5600) Approved
CSFM (
#
7080-0067:0214) for Model CPY-1200 only
• Department of Transportation (DOT) Approved
ARCHITECT AND ENGINEER SPECIFICATIONS