Data Sheet for Product

ManualsBrandsSiemens ManualsFire - Dry ExtinguishingCPY-150, CPY-250 Cylinder / Valve Assemblies – 1-1/2 Inch Discharge Port, Data Sheet

[Cylinder / Valve Assemblies – 1-1/2” Discharge Port] Sinorix

6621

s Industry, Inc.

Building Technologies Division

Data Sheet

Fire Safety Products

Sinorix

Engineered Fire Suppression Systems

Cylinder / Valve Assemblies – 1-1/2” (6.4 cm.) Discharge Port

(Includes: Cylinder-Mounting Straps / Brackets; Top-Plug Adapter; Liquid-Level Indicator & Low-Pressure Switch)

Models CPY-150, CPY-250

Product Overview Specifications

Models CPY-150, CPY-250 are filled as follows:

Model

Cylinder

Size

Max. Fill at

70 LB/FT

Min. Fill at

30 LB/FT

CPY-150

150 Lbs.

65 Lbs.

CPY-250

250 Lbs.

110 Lbs.

Models CPY-150 and CPY-250 can be filled with

HFC-227ea suppression agent or with 3M™

Novec™ 1230 Fire Protection Fluid. Models

CPY-150 and CPY-250 are pressurized with

nitrogen to 360 psig at 70°F (21.1°C), and

are manufactured, tested and marked in

accordance with D.O.T. specifications:

4BA500 or 4BW500 for the various sizes.

All cylinder and valve assemblies are furnished

with an internal siphon tube. Cylinders must be

mounted in the vertical position.

The size 150 and 250 lbs. cylinders use a valve

with a 1-1/2–inch (6.4 cm.), unified victaulic outlet.

These pressure-seated valves are designed for

high-flow rates. Additionally, each valve meets

the rapid discharge time specified in NFPA 2001.

All valve assemblies have:

 Brass body

 Brass piston with resilient seat

 Safety-disc assembly

 Pressure gauge

 Pressure-releasing, pilot-check assembly for

manual and pressure actuation, which relieves

the pressure above the piston, and permits

the piston to travel upward

 Optional electronic solenoid on the valve,

which relieves the pressure above the piston,

and permits the piston to travel upward

• For use with

Sinorix 227

and

Sinorix 1230

• High-flow-rate valve

• 1-1/2 inch, discharge-port valve assembly

• Manual, electric or pressure operated

• Low-pressure monitoring switch

• Wall-mounting brackets included

• Liquid-level indicator

• UL Listed & ULC Listed

FM Approved

ARCHITECT AND ENGINEER SPECIFICATIONS

CPY-150

CPY-250

Summary of content (4 pages)

PAGE 1
Data Sheet s Fire Safety Products Sinorix® Engineered Fire Suppression Systems Cylinder / Valve Assemblies – 1-1/2” (6.4 cm.
PAGE 2
Specifications ─ (continued) Valve Controls All valve sizes accept the same set of valve controls. Electronic Solenoid Valve The Electronic Solenoid Valve is normally closed (NC), and opens upon electric energy being applied − therefore relieving pressure above the valve piston, and causing the cylinder valve to open. For electrical connections, the Electronic Solenoid Valve is furnished with 24" (61 cm.) pigtails.
PAGE 3
Cylinder Mounting Straps & Brackets The steel straps and brackets are used to mount the cylinders in the vertical position: The brackets, which are used for wallmounting purposes, are secured to adjacent wall studs. The brackets and straps are UL Listed & ULC Listed; as well as FM Approved. Liquid-Level Indicator The Liquid-Level Indicator works magnetically, so it is not necessary to move or disconnect cylinders.
PAGE 4
Notice: This marketing data sheet is not intended to be used for system design or installation purposes. For the most up-to-date information, refer to each product’s installation instructions. s I ndustry, Inc. Building Technologies Division Fire Safety 8 Fernwood Road Florham Park, NJ 07932 Tel: (973) 593-2600 FAX: (908) 547-6877 URL: www.USA.Siemens.com/Fire (SII-FS) Printed in U.S.A. Fire Safety 1577 North Service Road East Oakville, Ontario L6H 0H6 / Canada Tel: [905] 465-8000 URL: www.Siemens.