User Manual

ManualsBrandsSiemens ManualsFire - Addressable ModulesFCM-6, LCM-8, SCM-8 (for FireFinder) Control Modules, Data Sheet

FireFinder XLS

6317

s Industry, Inc.

Building Technologies Division

CatalogSheet

FireSafety &Security Products

FireFinder XLS

Switch-Control Module / LED-Control Module / Fan-Control Module

Models SCM-8, LCM-8 and FCM-6

Products Overview

SCM-8

Model SCM-8 is a Siemens FireFinder XLS option

module that provides manual control of the

Emergency Voice Evacuation System or Manual

Fire-System Control. Each Model SCM-8 module

provides eight (8) momentary push-button

switches and 16 LEDs to indicate their status. Each

switch is assigned two (2) LEDs and a label to

indicate the switch's programmed usage. The label

slides behind a clear, protective membrane.

One of the LEDs assigned to each switch is a dual-

color LED used to indicate what type of signal is

active. This LED may also be lighted steady or

flashing to further indicate system status.

For example, zones active to the evacuation audio

channel will have the LED lighted RED and steady;

zones active to the Alert audio channel will have

the LED lighted RED and flashing; zones selected

for paging will have the LED lighted GREEN and

flashing until the microphone key is pressed.

•

Eight (8) programmable switches

(Model SCM-8)

• Protected space provided for labeling

• Discreet switches

• Multi-color LEDs for clear indication of

system status

• Modular

• Programmable LED annunciation

• Remote mounting in REMBOX2 or

REMBOX4 enclosures

FCM-6

LCM-8

• Six (6) sets of the push-button,

programmable fan-control switches

(Model FCM-6)

• Manual ‘On’ / ‘Off’ / ‘Automatic’ positions

• Positive feedback (supervised)

• LED indication of fan status

(‘On’ / ‘Off’ / ‘Trouble’)

• Protected label provided

• Modular

• Activation-stagger timer

• UL 864 9

Edition Listed & ULC Listed;

FM, CSFM & NYMEA Approved

Summary of content (4 pages)

PAGE 1
s Catalog Sheet Fire Safety & Security Products FireFinder XLS Switch-Control Module / LED-Control Module / Fan-Control Module Models SCM-8, LCM-8 and FCM-6 SCM-8 LCM-8 FCM-6 • Six (6) sets of the push-button, programmable fan-control switches (Model SCM-8) (Model FCM-6) • Protected space provided for labeling • Manual ‘On’ / ‘Off’ / ‘Automatic’ positions • Discreet switches • Positive feedback (supervised) • Multi-color LEDs for clear indication of system status • LED indication of fan status (‘On’ /
PAGE 2
Products Overview – (continued) SCM-8 When the zone-transfer confirmation message is received by the XLS command console, the LED will change to steady GREEN, indicating that it is clear to page. Telephone zones with an incoming call in progress will have an LED flashing GREEN until selected at the command console ─ at which time the LED will change to steady GREEN, etc. This process allows the operator easy, clear access to the overall system condition at all times.
PAGE 3
Electrical Ratings Details for Ordering Temperature and Humidity Range Products are UL 864 9th Edition listed for indoor dry locations within a temperature range of 120+/-3°F (49+/-2°C) to 32+/-3°F (0+/-2°C) and at a relative humidity of 93+/-2% at a temperature of 90+/-3°F (32+/-2°C). Wiring Diagram Installing FCM-6, LCM-8 and SCM-8 Modules s Industry, Inc.
PAGE 4
Notice: This marketing catalog sheet is not intended to be used for system design or installation purposes. For the most up-to-date information, refer to each product’s installation instructions. s Industry, Inc. Building Technologies Division Fire Safety 8 Fernwood Road Florham Park, NJ 07932 Tel: (973) 593-2600 FAX: (908) 547-6877 URL: www.SBT.Siemens.com/FIS (SII) Printed in U.S.A.