Technical data

ManualsBrandsSiemens ManualsConsumer electronicsCU230P-2

261

262

263

264

265

266

267

268

269

270

List of Parameters

Parameters

1-265

SINAMICS G120 Control Units CU230P-2 Parameter Manual (LH9), 01/2011

Description: Binector output for bit-serial interconnection of PZD2 received from the PROFIdrive controller.

Description: Binector output for bit-serial interconnection of PZD3 received from the PROFIdrive controller.

r2091.0...15 BO: PROFIdrive PZD2 receive bit-serial / PZD2 recv bitw

Access level: 3 Calculated: - Data type: Unsigned16

Can be changed: - Scaling: - Data set: -

Units group: - Unit selection: -

Min Max Factory setting

- - -

Bit field: Bit Signal name 1 signal 0 signal FP

00 Bit 0 ON OFF -

01 Bit 1 ON OFF -

02 Bit 2 ON OFF -

03 Bit 3 ON OFF -

04 Bit 4 ON OFF -

05 Bit 5 ON OFF -

06 Bit 6 ON OFF -

07 Bit 7 ON OFF -

08 Bit 8 ON OFF -

09 Bit 9 ON OFF -

10 Bit 10 ON OFF -

11 Bit 11 ON OFF -

12 Bit 12 ON OFF -

13 Bit 13 ON OFF -

14 Bit 14 ON OFF -

15 Bit 15 ON OFF -

r2092.0...15 BO: PROFIdrive PZD3 receive bit-serial / PZD3 recv bitw