BA Cover CX253_203isdn sw.qxd 23.11.2005 13:44 Uhr Seite 1 s Issued by Siemens Home and Office Communication Devices GmbH & Co. KG Schlavenhorst 66 D-46395 Bocholt © Siemens Home and Office Communication Devices GmbH & Co. KG 2005 All rights reserved. Subject to availability. Rights of modification reserved. Gigaset CX253isdn/CX203isdn www.siemens.
Number keys Enter text Volume Adjust Handsfree on/off Phonebook Open Last number redial Enter menu key Opens the main menu Playing back messages (CX253isdn) Answering machine key Lit: AM activated (SX253isdn) Pause / end playback of messages (SX253isdn) Microphone Function keys Message key flashes: New message, new entries in call list Exit menu key back to previous menu Display keys Antenna SX303/353isdn / englisch / A31008-X353-B100-2-7619 / SAG_covers_I-II.fm / 14.11.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / IVZ.fm / 14.11.2005 Contents Contents Brief overview of base station . . . . . . . . . . . . . . . . . 1 Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Display explanation . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Preparing the base station for use . . . . . . . . . . . . . 7 Pack contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / IVZ.fm / 14.11.2005 Contents Making cost-effective calls . . . . . . . . . . . . . . . . . . 43 Linking a call-by-call number with a phone number . . . . . . . . . . . . . . . . . . . . . . . . . 43 Call duration display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Call charge display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / IVZ.fm / 14.11.2005 Contents Activating/deactivating automatic pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Locking the answering machine, defining AM PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting time control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Activating/deactivating automatic listen in . . . . . . . . . . . . . . . . . . . . . . . . . . .
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / IVZ.fm / 14.11.2005 Contents Operating with other devices . . . . . . . . . . . . . . . 116 Registering handsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . De-registering handsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Gigaset Repeater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / sec_hints.fm / 14.11.2005 Safety precautions Safety precautions ◆ Read the safety precautions and the user guide before use. ◆ Explain their contents to your children, and the potential hazards ! O ! associated with using the telephone. Only use the power supply unit supplied, as indicated on the underside of the telephone. The operation of medical appliances may be affected.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / starting.fm / 14.11.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / starting.fm / 14.11.2005 Preparing the base station for use Connecting the base station Note the specified sequence Socket for power cord Socket for ISDN connection cable Socket for coiled receiver cord Schematic illustration 1.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / starting.fm / 14.11.2005 Preparing the base station for use Outlet Cable recess 2. Power supply unit with power cord Underside of base station (enlarged view) 3. ◆ Insert the small jack on the power cord into the socket on the base station ◆ Position cable in the cable recess ◆ Ensure that the receiver is positioned correctly on the base station! Plug the power supply unit into your power outlet.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / starting.fm / 14.11.2005 Preparing the base station for use The various display symbols have the following meanings: Display Symbol OK W X { stuv Meaning when pressed OK key: Confirm menu function or confirm an input and store. Menu+ key: Open submenu, e.g. in input fields. Delete key: Delete input from right to left one character at a time. Escape key: Go back one menu level, or cancel the operation.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / starting.fm / 14.11.2005 Preparing the base station for use Idle status Display in idle status (example) Gigaset CX203isdn Gigaset CX253isdn <1> Internal 10 10.12.04 Ÿ 09:45 The number in pointed brackets <> indicates how many telephone lines are currently in use: <1> or <2>. INT SMS <1> AM: Internal 10 10.12.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / starting.fm / 14.11.2005 Preparing the base station for use Operating the base station from a S44 handset The central operating element of the S44 handset is the control key p, which has four direction arrows and the associated symbols. Pressing the various icons (up, down, right, or left) opens a different function. In the operating instructions, the side you need to press is marked with a black triangle, e.g. key v for right = Open menu.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / starting.fm / 14.11.2005 Preparing the base station for use Operating the base station from a C34 handset The central operating element of the C34 handset is a control key p, which has a triangle to the top and bottom and a point to the left and right. Pressing the various icons (up, down, right, or left) opens a different function. The side you have to press is shown by a black triangle in the operating instructions.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / starting.fm / 14.11.2005 Preparing the base station for use Preparing the base station for use – Getting started wizard A few settings are necessary before using your base station. The Getting started wizard (page 15) is designed to help you with this. It can be called up at any time using the display on your base station (page 15) or using an added=feature S44, S1 or SL1 handset (see handset operating instructions).
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / starting.fm / 14.11.2005 Preparing the base station for use two handsets (Int.13 and 14) and the answering machine AM 92 are intended for private use. Internal users handsets Answering machine Handset Handset Answering machine Int.11, 12 AM 91 Int.13 Int.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / starting.fm / 14.11.2005 Preparing the base station for use Setting the date and time: Depending on the network provider, the date and time are adopted automatically from the telephone network during the first outgoing call. The display shows: Enter time? Press the display key to set the date and time. [RRRRRRRRRRRRRRRRRRRRRRRRRRR] YES ~ Enter the date (6-digit) and time (4-digit in 24-hour mode) in series, e.g. 101204 0945 for 12/10/04 9:45 a.m..
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / starting.fm / 14.11.2005 Preparing the base station for use The MSNs entered are automatically assigned to all registered handsets as receive MSNs. MSN1 is automatically assigned to all handsets as the send MSN. This procedure is repeated for MSN2 to MSN9 and for MSN0. Setting the receive MSN The display shows: Set incoming MSN? The receive MSN is used to answer incoming calls.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / starting.fm / 14.11.2005 Preparing the base station for use Using with a PABX: Only carry out the following steps if you want to connect your telephone to a private PABX (not directly to a NTBA). Depending on the PABX, it may be necessary for you to enter an access code (outside line code) for external calls during installation; refer to the operating instructions for your PABX for details. You can enter an access code (one to four digits).
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / telephony.fm / 14.11.2005 Making calls Making calls Making external calls and ending a call External calls are calls using the public telephone network. Two external calls can be made at the same time on your base station. either ... Immediate dialling: c ~ Lift the receiver. Enter the telephone number. The phone number is dialled. or ... Block dialling: ~ c Enter the telephone number. a Replace the receiver. Lift the receiver.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / telephony.fm / 14.11.2005 Making calls Calling a specific handset c Lift the receiver. Press the display key to initiate the internal call. [RRRRRRRRRRRRRRRRRRRRRRRRRRR] INT either ... ~ Enter the number of the internal user you want. or ... Press the display key. [RRRRRRRRRRRRRRRRRRRRRRRRRRR] LIST s INT11: Int.11 OK ... then Select and confirm the internal number you want, e.g. INT11: Int.11. End the call: a Replace the receiver.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / telephony.fm / 14.11.2005 Making calls Answering a call Your base station rings, the call is shown in the display and the handsfree key d flashes. Lift the receiver or press the handsfree key d to answer the call. i If the ringer is intrusive, press the Silence display key. You can answer the call as long as it is displayed on the screen. Information on how to change the ringtone can be found on page 112.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / telephony.fm / 14.11.2005 Making calls Withholding phone number identification If you do not wish your phone number to be revealed to the person you are speaking to you can stop your number being identified. You can withhold identification of your phone number specifically for the next call or else for all calls. With the permanent setting, the phone number is withheld from the other caller both for outgoing calls (CLIR) and for incoming calls (COLR).
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / telephony.fm / 14.11.2005 Making calls Activating/deactivating handsfree and open listening The function of the handsfree key d depends on the current status of your base station: Your base station is in idle status: Activate handsfree while dialling: ~d Enter the number and press the handsfree key.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / telephony.fm / 14.11.2005 Making calls Rejecting a call You get an external call or you are making a call and receive an external call. The call is signalled acoustically and also shown in the display on all telephones or handsets in this MSN group. You can reject this external call. Press the display key REJECT.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / telephony.fm / 14.11.2005 Making calls i ◆ The temporarily set send MSN is displayed as the phone number for the person you are calling. ◆ To make this function easier to use, you can also set one of the function keys accordingly (page 115). You can set up your base station so that after lifting the receiver or pressing the handsfree key d a list of all available send MSNs is displayed (page 95).
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / telephony.fm / 14.11.2005 Making calls Checking and deleting a callback Deleting the callback while it is incoming The base station rings and the display shows the callback number. Press the display key. The callback function is cancelled. [RRRRRRRRRRRRRRRRRRRRRRRRRRR] DELETE Checking or deleting the callback before it is incoming i s Set base s Status OK Select the menu item and confirm. OK s Callback Select the menu item and confirm.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / during.fm / 14.11.2005 Functions during a call Functions during a call Muting the base station You can mute your base station during a call, e.g. if you wish to talk confidentially to another person in the room. Your party on the line cannot hear your conversation during this time. But you can continue to hear him/her. Press the display key. The call is put on hold. [RRRRRRRRRRRRRRRRRRRRRRRRRR ] MUTE To cancel muting: Press the display key.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / during.fm / 14.11.2005 Functions during a call Make a call to the second external user: ~ Enter the second user's telephone number. You can also make a call via the Phonebook or other lists (page 34). If the second external user you have dialled is busy: [RRRRRRRRRRRRRRRRRRRRRRRRRRR] BACK Press the display key to return to the first party. If the second external user rings: either ...
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / during.fm / 14.11.2005 Functions during a call Make a call to the internal user: either ... ~ Enter the number of the internal user you want. [RRRRRRRRRRRRRRRRRRRRRRRRRR ] LIST Press the display key. or ... sINT11: Int.11 OK Select the required internal number, e.g. INT11: Int.11, and confirm. The connection to the internal user is established. The internal user dialled is busy: Press the display key to return to the external party.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / during.fm / 14.11.2005 Functions during a call Conference call Precondition: You have established an enquiry call (page 27 and page 28). There is both an active call (the one established with an enquiry call) and a held call (the first). In a conference call you can speak to both other callers at the same time. i You can make a conference call with ◆ two external users or ◆ with one internal user and one external user.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / during.fm / 14.11.2005 Functions during a call Forwarding an incoming call – CD (Call Deflection) CD enables an incoming call to be diverted to any phone number while it is ringing, without having to answer the call. You can pre-set a divert destination (page 101), dial a phone number from the Phonebook or enter a new number. i s Forward Open the menu. OK Select the menu item and confirm. The pre-set divert destination is dialled.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / during.fm / 14.11.2005 Functions during a call Working with call waiting for an external call – CW (Call Waiting) Precondition: CW (Call Waiting) set up, see page 104. You hear the call waiting tone (short beep) if you receive an external call while conducting another call (internal or external). The caller's number or name will appear in the display if Calling Line Identification is enabled.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / during.fm / 14.11.2005 Functions during a call Call hold Hold external party You are conducting an external call. Press the display key INT. The external caller is put on hold. The waiting external party hears the waiting melody (page 105), when the connection is on hold internally (page 104). You can initiate an internal enquiry call (page 28). Internal users on hold You are conducting an internal call. Press the display key CONSULT.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / directories.fm / 14.11.2005 Using the Phonebook and other lists Using the Phonebook and other lists Phonebook and speed dial list You can store up to 200 phone numbers in the Phonebook. You can store up to 10 phone numbers in the speed dial list. The Phonebook makes dialling easier for you. You open the Phonebook in idle status using the h key. The speed dial list is a special Phonebook, where you can store particularly important phone numbers, e.g.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / directories.fm / 14.11.2005 Using the Phonebook and other lists Storing a telephone number in the speed dial list The maximum number of entries in the speed dial list depends on the number of entries in the Phonebook and in the email address book. Ÿ Open the speed dial list. sW New entry Select entry and open the submenu. OK Create an entry: ~ s~ Enter name. Scroll to the next line and enter the name. W Save entry Confirm.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / directories.fm / 14.11.2005 Using the Phonebook and other lists Defining the MSN for the next call You can select a valid send MSN for this call only even when dialling from the Phonebook. Precondition: MSN next call must be activated (page 95). Select an entry and press W to open the submenu. Using Dial number OK displays the list of MSNs. Viewing and editing an entry in the Phonebook/speed dial list hŸ sW Open the Phonebook or speed dial list.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / directories.fm / 14.11.2005 Using the Phonebook and other lists Selecting a phone number from the Phonebook If you are prompted to enter an external phone number while you are operating your telephone, you can use the Phonebook from your base station to do this. Precondition: The input field for external telephone numbers is displayed. h s Open the Phonebook. Select entry and confirm. OK The phone number of the entry is added to the entry field.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / directories.fm / 14.11.2005 Using the Phonebook and other lists Display available memory The memory is divided between the Phonebook and the speed dial list (page 34). The available memory of all these lists is displayed. h sW s Available memory j Open the Phonebook. Select any entry and open the menu. OK Select the menu item and confirm. Hold down (back to idle status).
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / directories.fm / 14.11.2005 Using the Phonebook and other lists Automatic redial With this function, the phone number of a party you did not reach is redialled automatically every 20 seconds. The handsfree key flashes and "Open listening" is activated. If the party answers, press the talk key c. "Open listening" remains activated. If the party does not answer, the call is terminated after approx. 30 seconds.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / directories.fm / 14.11.2005 Using the Phonebook and other lists Caller lists There are two caller lists: ◆ the list of missed calls It contains all calls that have not been answered or have been rejected and all calls answered by an answering machine for which there is no message. ◆ the list of answered calls This contains all the calls answered by an internal user or answering machine.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / directories.fm / 14.11.2005 Using the Phonebook and other lists Calling back a caller Precondition: The caller's number has been identified (page 21). Open the list of missed or answered calls (page 40). Now: s Select entry. cd Lift the receiver or press the handsfree key. W Open the menu. either ... Dial after line seizure or ... Dial before line seizure (block dialling) Dial number OK Confirm. Callback begins at once.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / directories.fm / 14.11.2005 Using the Phonebook and other lists Changing the caller's phone number Open the list of missed or answered calls (page 40). Now: sW s Change number Select entry and open the submenu. OK ~ Change the number. W Save entry Select the menu item and confirm. You will now see the number. Press the display key to open the submenu. OK Confirm.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / charges.fm / 14.11.2005 Making cost-effective calls Making cost-effective calls Sign up with a network provider who offers particularly low-cost call rates (call-by-call) or view the call charges on the base station. You can use the speed dial list to manage your call-by-call numbers. You can manage entries in the speed dial list in exactly the same way as entries in the Phonebook.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / charges.fm / 14.11.2005 Making cost-effective calls Call charge display You can display the charges if you have requested this from your network provider. You can check the ongoing units / total charges and the charges for the last call made (depending on setting, see page 46) on each terminal. The total charges includes the charges accrued by this terminal.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / charges.fm / 14.11.2005 Making cost-effective calls Entering the price per unit In order for the invoice type Units cent.off. to be able to calculate charges, you must define the currency and the price per unit (by factory default: No rate). For this charge calculation, Units cent.off. must be set (factory default). i s Costs s Type of calcul. OK Select the menu item and confirm. OK Select the menu item and confirm. s Rate --.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / charges.fm / 14.11.2005 Making cost-effective calls Displaying and deleting the cost overview Depending on the setting, call or charge units for each internal user, for each set-up MSN, and for the entire system are displayed. i s Costs Open the menu. Cost overview OK Select the menu item and confirm. OK Confirm. The total amount (for all internal users) is displayed. s Scroll to the accounts for the individual internal users or MSNs set up.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / sms.fm / 14.11.2005 SMS (text messages) SMS (text messages) You can use your base station to send and receive SMS text messages (Short Message Service). You ca send an SMS to any fixed network or mobile phone network number. Your SMS can be received as a text message by any device with SMS functionality (mobile phone, PC, another telephone). If the recipient of your SMS does not have a phone with SMS functionality, then the SMS is played back.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / sms.fm / 14.11.2005 SMS (text messages) By default, the "Anny Way" SMS centre has already been entered (number 0190 01504) and activated as the send centre. This means that, in Germany, you may send text messages immediately. You can activate another SMS centre as your send centre. The send centre that was activated previously is then automatically deactivated.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / sms.fm / 14.11.2005 SMS (text messages) Activating/deactivating SMS send centre To send an SMS you must activate the phone number for the required SMS centre as the send centre. By doing this you determine via which SMS centre the text message is to be sent. Text messages can be received via all SMS centres entered, as long as you have previously been through the registration procedure (see the next chapter) as an SMScapable connection.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / sms.fm / 14.11.2005 SMS (text messages) Registering/de-registering with an SMS centre In order to be able to receive text messages on your phone you must first register your phone number with an SMS service provider. You can find out from the service provider concerned which information you need to send to register and de-register.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / sms.fm / 14.11.2005 SMS (text messages) Sending a text message and the outgoing message list Notes on writing and sending an SMS message If you are interrupted as you are writing (by a call, an incoming SMS or because the handset changes to idle status because of prolonged inactivity), the SMS is automatically stored in the outgoing message list. You can continue writing the SMS later (page 53).
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / sms.fm / 14.11.2005 SMS (text messages) Saving text messages Precondition: You have written a text message (page 51) and the input field is open. W Press the display key to open the submenu. s Store OK Select the menu item and confirm. You can then send the text message (page 52). The message is stored in the outgoing message list. It can be retrieved and sent at a later time (page 53).
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / sms.fm / 14.11.2005 SMS (text messages) Opening the outgoing message list The outgoing message list shows you: ◆ Text messages which you saved before you sent them (page 52). ◆ Text messages you could not send, e.g. you were interrupted by an incoming call while you were writing the message. However, the list only shows text messages that are assigned to the same send MSN as the base station. These messages are stored until you delete them.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / sms.fm / 14.11.2005 SMS (text messages) Deleting the entire outgoing message list This function deletes all the messages in the outgoing message list. Precondition: You have opened the outgoing message list (page 53). W s Delete list Open the submenu. OK Confirm. Press the display key to confirm the prompt. [RRRRRRRRRRRRRRRRRRRRRRRRRRR] YES j Hold down (back to idle status).
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / sms.fm / 14.11.2005 SMS (text messages) Entering the text of the message ~ Enter the SMS text. mustermann@name.de Hallo Peter <> W Send Email address, space, SMS text (example) XW Press the display key to open the submenu. OK Confirm. Sending a text message as an e-mail You must send the text messages to the number for the e-mail service of your send centre. ~ Enter the number of the e-mail service. Dest.call no.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / sms.fm / 14.11.2005 SMS (text messages) Opening the incoming message list The incoming message list shows you: ◆ all received messages, ◆ messages that could not be sent despite several attempts. These messages are all stored with an error status (page 59). The message list is displayed, e.g.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / sms.fm / 14.11.2005 SMS (text messages) Reading and deleting text messages in the incoming message list Precondition: You have opened the incoming message list (page 56). s Select SMS. W Open the submenu. either ... Read textmessage Read SMS: OK or ... s Delete textmess. j Confirm. Use s to view the continuation of the text message in the display. Delete SMS: OK Select the menu item and confirm. Hold down (back to idle status).
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / sms.fm / 14.11.2005 SMS (text messages) ... then W Press the display key to open the submenu. Send OK Confirm and then send the message as described on page 52. The sender’s phone number is provided automatically. OK Select and confirm to store the entry. or ... s Store To forward a text message, open the menu with W and select the Send option. Now send the message as described on page 52.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / sms.fm / 14.11.2005 SMS (text messages) Adding a text message sender's telephone number to the Phonebook Precondition: You have opened the incoming message list and selected a message (page 56). W s Copy to dir. s~ Press display key to open menu. OK Go to the Name line and enter the name (max. 16-digits) (for entering text, see page 131). W Store Press display key to open menu. OK j i Select the menu item and confirm. Confirm.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / sms.fm / 14.11.2005 SMS (text messages) You can display information about the cause of errors on the screen. Precondition: You have opened the incoming message list (page 56). s Scroll to the text message you were unable to send. W s Error status Open the submenu. OK [RRRRRRRRRRRRRRRRRRRRRRRRRRR] BACK Select the menu item and confirm. The cause of the error appears in the display. Now press the display key to return to the incoming message list.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / answeringm_use.fm / 14.11.2005 Operating the answering machine (on CX253isdn) Operating the answering machine (on CX253isdn) The Gigaset CX253isdn has three answering machines (AM1, AM2, AM3), which can be used independently of each other. You can operate the answering machines either directly via the base station, a registered handset or by remote control (internal or external call to the answering machine, see page 70).
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / answeringm_use.fm / 14.11.2005 Operating the answering machine (on CX253isdn) Activating/deactivating the answering machine You can only activate/deactivate an answering machine when time control is not active (page 79). Precondition: You have selected an answering machine (page 61). either ... Activate the answering machine: s Activate? OK s Deactivate? OK or ... Select the menu item and confirm.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / answeringm_use.fm / 14.11.2005 Operating the answering machine (on CX253isdn) i The answering machine switches automatically from recording mode to announce only mode when the memory is full. As soon as memory space is made available (e.g., because you have deleted some messages) the answering machine automatically switches back to answer and record mode.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / answeringm_use.fm / 14.11.2005 Operating the answering machine (on CX253isdn) Recording memos Memos are "spoken notes" recorded, for example, for members of your family. A memo is played back, saved and deleted in the same way as a message. If there is a new memo, the message key f flashes on all handsets assigned to the answering machine. You can also record memos when the answering machine is deactivated.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / answeringm_use.fm / 14.11.2005 Operating the answering machine (on CX253isdn) Picking up a call from the answering machine You can pick up a call, even if the answering machine has already switched itself on, your announcement is running or the caller is already leaving a message. When you pick up the call the recording stops. Precondition:To pick up an answering machine call, the minimum authorisation "Answer only" is required (page 90).
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / answeringm_use.fm / 14.11.2005 Operating the answering machine (on CX253isdn) Jumping to the next or previous message during playback s t Go to the next message. Ï Repeat the last 5 seconds of the current message. If less than 5 seconds have elapsed, the current message is played back from the beginning. tt Skip to previous message. Skip to beginning of current message.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / answeringm_use.fm / 14.11.2005 Operating the answering machine (on CX253isdn) Playing a message to another caller During an external call you can play messages from the answering machine to the person you are calling. Precondition: The same receive MSN is assigned to the base station (or handset) and the answering machine. During the call: i s Play message s AM1 Open the menu. OK Select the menu item and confirm.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / answeringm_use.fm / 14.11.2005 Operating the answering machine (on CX253isdn) Setting the playback speed You can set the playback speed of messages/memos in four levels: Slow, Normal speed, Fast or Very fast. When the phone is supplied Normal speed is set for all answering machines. During playback: W s Speed s Fast Press the display key to open the submenu. OK Select the menu item and confirm. OK Select the speed level and confirm, e.g.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / answeringm_use.fm / 14.11.2005 Operating the answering machine (on CX253isdn) Deleting all old messages/memos Precondition: You have selected an answering machine (page 61). either ... Messages Delete all old messages: OK W s Del.old messages Press the display key to open the submenu. OK or ... Delete all old memos: OK Select the menu item and confirm. OK Select the menu item and confirm. W s Delete old memos Select the menu item and confirm.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / answeringm_use.fm / 14.11.2005 Operating the answering machine (on CX253isdn) Remote control You can control your answering machine remotely from a registered handset or any external connection or mobile telephone, e.g., to play back and delete messages. Apart from the first step, the procedure is the same for both kinds of remote control.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / answeringm_use.fm / 14.11.2005 Operating the answering machine (on CX253isdn) Introduction to remote operation while you are away from home For remote control you need a telephone that transmits DTMF tones (tone dialling). It is important to enter the AM PIN immediately while the announcement is being played. In addition Remote control and, if required, Remote delete must be activated. ~ ~ Dial your own telephone number.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / answeringm_use.fm / 14.11.2005 Operating the answering machine (on CX253isdn) Key sequences for remote control Once you have initiated remote control of the answering machine, the functions of the keys are the same for all telephones.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / answeringm_use.fm / 14.11.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / answeringm_config.fm / 14.11.2005 Setting the answering machine (on CX253isdn) Setting the answering machine (on CX253isdn) Once you have connected your telephone your answering machine is ready for use. Answering machine AM1 is activated. It records all messages (on all receive MSNs). AM1 can be played back and set from all handsets (factory default). By default, AM2 and AM3 are not activated (page 75).
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / answeringm_config.fm / 14.11.2005 Setting the answering machine (on CX253isdn) Hiding/showing an answering machine If you only want to use one or two answering machines for your connection, you can hide the other answering machine(s) from all displays and menus.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / answeringm_config.fm / 14.11.2005 Setting the answering machine (on CX253isdn) Specifying the number of rings before the answering machine starts You can set when you want the answering machine to activate (after how many rings). The options are: 1 ring tone, 2 ring tone, ..., 9 ring tone. Instead of a set number of rings, you can also choose the cost saving setting Automatic 2/4 (factory default).
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / answeringm_config.fm / 14.11.2005 Setting the answering machine (on CX253isdn) Setting the recording time and recording quality You can set the maximum length of a message and its recording quality. The recording quality determines the total recording time of your answering machine. On the High quality setting the total recording time is up to 12 min, on Long recording (standard quality, generally adequate) up to 25 min.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / answeringm_config.fm / 14.11.2005 Setting the answering machine (on CX253isdn) Activating/deactivating automatic pause If automatic pause is activated the answering machine switches to pause mode after playing back a message or memo. The next message will not be played back until you press the Ð display key or the ô key. When the phone is supplied automatic pause is deactivated. Precondition: You have selected an answering machine (page 61).
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / answeringm_config.fm / 14.11.2005 Setting the answering machine (on CX253isdn) Setting time control You can set the answering machine so that it is activated or deactivated depending on the time of day, as well as using different announcements depending on the time of day. You can define (for the 24-hour day) up to four time sections with different settings for the answering machine. You must specify a start time for each time section.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / answeringm_config.fm / 14.11.2005 Setting the answering machine (on CX253isdn) s Start time ~ OK Enter the start time (4-digit). The start time specifies the end of the previous time section. W Save entry Select the menu item and confirm. Press the display key to open the submenu. OK j Confirm. Hold down (back to idle status).
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / answeringm_config.fm / 14.11.2005 Setting the answering machine (on CX253isdn) Activating/deactivating automatic listen in You can set up your answering machine so that it automatically switches a handset assigned to it or the base station (CX263 or SX353 only) to automatically listen in when it is recording a message. By default, automatic listen in is deactivated.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / answeringm_config.fm / 14.11.2005 Setting the answering machine (on CX253isdn) Activating/deactivating automatic pick up With automatic pickup you can take a call directly from the answering machine (during announcement or recording) on any handset or by lifting a receiver (telephone with cord) providing the same receive MSN is assigned to all devices. You just need to press the talk key c on the handset. The recording of the call will then stop.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / answeringm_config.fm / 14.11.2005 Setting the answering machine (on CX253isdn) Entering destination phone number for a text message Precondition: You have selected an answering machine (page 61). s Settings s SMS notificat. ~ OK Select the menu item and confirm. OK Select the menu item and confirm. Enter destination number (up to 20 digits). W Save entry Press the display key to open the submenu. OK j Confirm. Hold down (back to idle status).
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / time_calendar.fm / 14.11.2005 Date and Time Date and Time Setting the date and time The first time you make a call on your phone, the date and time are transmitted by the exchange. You can choose between the 12 hour and the 24 hour display (factory setting) for the time (a.m. = 1st half of the day; p.m. = 2nd half of the day). i s Set base s Settings s System settings s Date/time Open the menu. OK Select the menu item and confirm.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / time_calendar.fm / 14.11.2005 Date and Time Setting appointments You can use your base station to remind yourself of an appointment. To do this, you have to save the times. Setting an appointment i s Reminder Open the menu. OK W Select the menu item and confirm. Press the display key to open the submenu. Change reminder OK Select the menu item and confirm. ~ OK Enter the date and time.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / time_calendar.fm / 14.11.2005 Date and Time Switching off or answering an appointment alarm An appointment call is signalled acoustically. The stored message (page 85) or Reminder is shown in the display. Press the display key Off to switch off the appointment alarm. The appointment alarm will ring for 15 seconds if it is not answered. Expired appointments remain in the memory.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / time_calendar.fm / 14.11.2005 Date and Time s INT11: Internal 11 Select internal number, e.g. INT11: Internal 11 (‰ = set). or ... Select the answering machine (for CX253isdn): s Answering mach. s AM2 OK Select the menu item and confirm. Select the answering machine you would like e.g. AM2. The calls are forwarded to the selected answering machine. ... then j Hold down (back to idle status).
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / time_calendar.fm / 14.11.2005 Date and Time Activating/deactivating Saturday/Sunday all day Night service If Sat/Sun all day is set, then Night service is active between the indicated start and end times from M-F, and all day on weekends. If Sat/Sun all day is deactivated, calls are also diverted at the weekend between the set start and end times. By factory default, Sat/Sun all day is activated.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / security.fm / 14.11.2005 Security settings Security settings Changing the system PIN You can protect the following settings against unauthorised access using the system PIN (Personal Identification Number): ◆ Call charges and settings ◆ Internal and external call diversion ◆ SMS service centres, subscriber configurations, security, ISDN and system settings ◆ Getting started wizard The system PIN will not work with the number 0000.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / security.fm / 14.11.2005 Security settings Defining authorisation You can set different authorisations for all registered devices: ◆ Unrestricted (set as factory default) All devices can answer incoming calls and make outgoing external/internal calls. ◆ Incoming only The devices can only answer incoming external calls. External outgoing calls are not possible. Internal calls (outgoing and incoming) are possible. Emergency numbers can be dialled.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / security.fm / 14.11.2005 Security settings Setting up, editing, reading and deleting personal emergency numbers i s Set base s Settings ~ OK Open the menu. OK Select the menu item and confirm. OK Select the menu item and confirm. If required, enter the PIN and confirm (page 89). OK Security s Emergency nos. s Select. The emergency numbers list is opened. Select list entry, e.g. .
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_bs.fm / 14.11.2005 System settings System settings The abbreviations in brackets after the titles indicate the ISDN service concerned. Some features may only be used if they have been authorised by the network provider (there may be an extra charge). Changing the name for an internal user By factory default, all internal numbers are given the names Int.11, Int.12, etc., according to their numbering.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_bs.fm / 14.11.2005 System settings Setting up an ISDN phone number (MSN) / changing the name If you have not saved all the phone numbers with the Getting started wizard (page 15), you can enter them now. All phone numbers that are subsequently stored are automatically assigned to all registered terminals. Each newly set up phone number automatically gets its own ringer melody, which can be changed to suit your individual requirements (page 96).
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_bs.fm / 14.11.2005 System settings Assigning a phone number (MSN) You can assign particular individual phone numbers (MSN's) to registered terminals. When doing this determine ◆ which phone number makes a registered terminal ring (receive MSN), ◆ under which number an internal user dials (send MSN). Assigning a receive MSN As supplied, a newly registered handset will ring whenever a phone number you have set up is dialled.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_bs.fm / 14.11.2005 System settings Setting up the list of send MSNs for the next call You can set up your base station so that after lifting the receiver or pressing the handsfree key d a list of all available send MSNs is displayed. By factory default, MSN next call is not activated. i s Set base s Settings ~ OK s Setup user s Setup device s INT11: Int.11 s MSN next call j Open the menu. OK Select the menu item and confirm.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_bs.fm / 14.11.2005 System settings Assigning an MSN a ringer melody Each receive MSN is assigned a ringer melody when setting up. You can change this assignment for each receive MSN individually. This means that all terminals will use this ringer melody to indicate an incoming call to a receive MSN. i In place of ringer melodies 1-20, you can also assign the "Device ringer" to an MSN.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_bs.fm / 14.11.2005 System settings Diverting calls i To make this function easier to use, you can also set one of the function keys accordingly (page 115). Diverting calls internally i ◆ Only one destination can be selected for internal call diversion. ◆ Only one-level call diversion is supported: If the subscriber to which you divert your calls has activated their own call diversion, this is no longer effective.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_bs.fm / 14.11.2005 System settings Specifying the number of ring cycles Ring delay can be used to specify the number of ring cycles after which a call is to be diverted. The setting can be between 0 (= immediate call diversion) and 9 ring cycles. A ring cycle lasts 5 seconds. The default setting is 0 ring cycles (= immediate call diversion). i s Set base s Forward. base ~ OK s No. of rings ~ j Open the menu.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_bs.fm / 14.11.2005 System settings Setting the location for call diversionn By default, Forward. netw. is activated. i s Set base s Settings ~ OK s ISDN settings Open the menu. OK Select the menu item and confirm. OK Select the menu item and confirm. Enter system PIN if required (page 89). OK Select the menu item and confirm. s Forward. base OK Select and confirm (‰ = set). s Forward. netw. OK Select and confirm (‰ = set). either .
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_bs.fm / 14.11.2005 System settings Activating/deactivating external call diversion i s Set base s Ext. call forw. ~ OK s Open the menu. OK Select the menu item and confirm. OK Select the menu item and confirm. Enter system PIN if required (page 89). W either ... Select call diversion and open the submenu. Activate: s Activate? OK s Deactivate? OK or ... Select the menu item and confirm. Deactivate: Select the menu item and confirm.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_bs.fm / 14.11.2005 System settings Activating/deactivating handsfree dialling If you have activated Dial handsfree, you can dial without lifting the receiver. As soon as you have entered the first digit, the line is seized and handsfree is automatically activated. i s Settings s Dial handsfree j Open the menu. OK Select the menu item and confirm. OK Select the menu item and confirm (‰ = set). Hold down (back to idle status).
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_bs.fm / 14.11.2005 System settings By default, automatic call diversion is not set up. i s Set base s Settings ~ OK s ISDN settings s Auto.forwarding s MSN1: ~ Save entry Open the menu. OK Select the menu item and confirm. OK Select the menu item and confirm. Enter system PIN if required (page 89). OK Select the menu item and confirm. OK Select the menu item and confirm. W W OK j Select MSN and open submenu, e.g. MSN1: Anna.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_bs.fm / 14.11.2005 System settings Setting up ring delay Ring delay can be used to individually set one subscriber per receive MSN to ring later. However, during this ring delay time, the terminal can answer the call using the "Accept?" function without hearing a ring. The ring delay time is specified in ring cycles. A ring cycle lasts 5 seconds. The default setting is 0 ring cycles (= not activated).
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_bs.fm / 14.11.2005 System settings Activating/deactivating call waiting – CW This function can be set up separately for each user. When call waiting is activated the caller will hear the ringing tone if you are already making a call. This call is indicated both acoustically and visually on your base station display.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_bs.fm / 14.11.2005 System settings Initiating an enquiry call see page 27 or page 28. i s Set base s Settings ~ OK s ISDN settings Open the menu. OK Select the menu item and confirm. OK Select the menu item and confirm. Enter system PIN if required (page 89). OK either ... s Int. enq. call Set Int. enq. call: OK or ... s Ext. enq. call j Select the menu item and confirm. Select the menu item and confirm (‰ = activated). Set Ext.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_bs.fm / 14.11.2005 System settings By factory default, Internal is activated. i s Set base s Settings ~ OK s System settings s Music on hold s Internal Open the menu. OK Select the menu item and confirm. OK Select the menu item and confirm. Enter system PIN if required (page 89). OK Select the menu item and confirm. OK Select the menu item and confirm. OK Select and confirm the desired setting, e.g. Internal (‰ = on).
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_bs.fm / 14.11.2005 System settings i s Set base s Settings ~ OK s ISDN settings s Lg.-dist. code s National : 0 Change number ~ Save entry Open the menu. OK Select the menu item and confirm. OK Select the menu item and confirm. Enter system PIN if required (page 89). OK Select the menu item and confirm. OK Select the menu item and confirm. W OK W OK Select the type of long distance prefix and open submenu, e.g. National : 0.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_bs.fm / 14.11.2005 System settings Calling an answering machine in the network (on CX203isdn) Press 1 and hold. You are connected directly to the answering machine in the network. If you then press the handsfree key d, you can listen to the answering machine announcement in the network and operate the answering machine via the network.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_bs.fm / 14.11.2005 System settings ~ OK s System settings s Spec. function s Factory setting Enter system PIN if required (page 89). OK Select the menu item and confirm. OK Select the menu item and confirm. OK Select the menu item and confirm. either ... Restore the functionality: s Operational OK s Reset all OK or ... Select the menu item and confirm. Restore factory settings: Select the menu item and confirm.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_tel.fm / 14.11.2005 Setting the volume, display and keys Setting the volume, display and keys Your base station has default settings. You can change these settings as required. Setting the display Changing the display language You can view the display texts in different languages. i s Settings Language s j i Open the menu. OK Select the menu item and confirm. OK Confirm.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_tel.fm / 14.11.2005 Setting the volume, display and keys Setting the display contrast You can set the contrast of the display. i s Settings s Contrast uv j i Open the menu. OK Select the menu item and confirm. OK Select the menu item and confirm. OK Set the display contrast and confirm. Hold down (back to idle status). After opening up the menu item Contrast, you can also set the display contrast using the ð and ñ keys.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_tel.fm / 14.11.2005 Setting the volume, display and keys Changing the ringtone A range of options is available: ◆ Six volume levels: – Five volume levels (1–5; e.g. volume level 2 = ˆ), – "Crescendo" call (6; the volume increases with each ring = ‰). ◆ Ten melodies (1–10; melodies 1–3 are the "traditional ringer tones"). Setting the ringer tone volume i s Audio s Ringer Volume uv j i Open the menu. OK Select the menu item and confirm.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_tel.fm / 14.11.2005 Setting the volume, display and keys Activating/deactivating advisory tones Your handset uses "advisory tones" to tell you about different activities and statuses. The following advisory tones can be activated and deactivated individually (the default setting is on). ◆ Key click: Every key press is confirmed. ◆ Confirmation tone (rising tone sequence): At the end of input/setting and when a text message is received.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_tel.fm / 14.11.2005 Setting the volume, display and keys Assigning a phone number to a function key You can use a function key with a phone number assigned to it for targeted dialling of a particular party. Precondition:You have assigned the function key (page 113). ... then Edit entry OK ~W Save entry Confirm. Enter the phone number and open the submenu. OK Confirm.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / settings_tel.fm / 14.11.2005 Setting the volume, display and keys Assigning call diversion to a function key You can assign an immediate call diversion to a function key; the general diversion path set for call diversion is then applicable (page 97). Precondition: You have assigned the function key (page 113). ... then s ISDN Functions s Forward immediat sMSN1: ~W Select the menu item and confirm. OK Select the type of call diversion and confirm, e.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / devices.fm / 14.11.2005 Operating with other devices Operating with other devices On your base station, you can register up to six cordless devices (including Gigaset data modules (page 123) and Gigaset Repeater (page 122)). You must initiate registration of a cordless device on the base station and on the cordless device itself. The internal numbers 11 to 16 are reserved for the cordless devices.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / devices.fm / 14.11.2005 Operating with other devices Manually registering a Gigaset E45, S45, SL55 handset v s Ð s Handset s Register H/Set s Base 1 Open the menu. OK Select the menu item and confirm. OK Select the menu item and confirm. OK Select the menu item and confirm. OK Select base (1–4) and confirm, e.g. Base 1. ~ Enter the system PIN of the base station (the default is 0000) and press §OK§. The screen will display, e.g. Base 1.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / devices.fm / 14.11.2005 Operating with other devices After registration the handset reverts to idle status. The handset's internal number is shown in the display. Manually registering a Gigaset C34 handset v Open the menu. s Handset Settings OK Select the menu item and confirm. s Handset OK Select the menu item and confirm. s Register Handset OK Select the menu item and confirm. ~ OK s INT11: Int.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / devices.fm / 14.11.2005 Operating with other devices Registering a Gigaset 4000 Comfort/Micro handset a Hold down to turn on the handset. OK Confirm the prompt. either ... or ... G Settings G Register H/Set G Base 1 OK Select the menu item and confirm. OK Select the menu item and confirm. OK Select base (1–4) and confirm, e.g. Base 1. ... then ~ OK Enter the system PIN of the base (the default is 0000) and confirm. s INT11: Int.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / devices.fm / 14.11.2005 Operating with other devices Registering a Gigaset 3000 Comfort/Micro handset − Hold down to turn on the handset. YES Confirm the prompt. either ... or ... . s Stations Open the menu. OK s Station1 s Registration Select the menu item and confirm. Select base (1-4) and open the submenu. OK Select the menu item and confirm. ... then ~ OK s INT11: Int.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / devices.fm / 14.11.2005 Operating with other devices Registering a Gigaset 2000 C handset h Press to turn on the handset. . s Settings Open the menu. OK Select the menu item and confirm. OK Select the menu item and confirm. s Station1 OK Select base (1-4) and confirm. s Registration OK s Registration Open the submenu. ~ OK s INT11: Int.11 Select the menu item and confirm.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / devices.fm / 14.11.2005 Operating with other devices De-registering handsets i s Set base s Settings ~ OK s Setup user s De-reg. device s INT16: Int.16 Open the menu. OK Select the menu item and confirm. OK Select the menu item and confirm. Enter system PIN if required (page 89). OK Select the menu item and confirm. OK Select the menu item and confirm. OK Select the handset that you wish to de-register and confirm, e.g. INT16: Int.16.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / devices.fm / 14.11.2005 Operating with other devices Registering a repeater Precondition: Gigaset Repeater has been deactivated (mains cable unplugged). 1. Prepare the base station for registration i Open the menu. s Set base s Settings ~ OK s Setup user s Register device OK Select the menu item and confirm. OK Select the menu item and confirm. Enter system PIN if required (page 89). OK Select the menu item and confirm.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / pabx.fm / 14.11.2005 Operating when connected to a PABX Operating when connected to a PABX If you are operating your base station on a PABX, special characteristics for receiving text messages should be noted (page 59). Access code Precondition: If your phone is connected to a PABX you may have to enter an access code (outside line code) for external calls when first getting started, depending on the PABX. See the operating instructions for your PABX.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / pabx.fm / 14.11.2005 Operating when connected to a PABX Dialling options The KEYPAD function allows you to control certain services by entering sequences of characters and digits. The KEYPAD function must be set when connecting your Gigaset CX203/253isdn to an ISDN PABX or to a telephone exchange (e.g., Centrex) which uses the KEYPAD protocol for control. The digits/characters 0–9, *, # are sent as keypad information elements.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / pabx.fm / 14.11.2005 Operating when connected to a PABX i s Set base s Settings ~ OK s System settings s Spec. function s Dial properties s Standard dial Open the menu. OK Select the menu item and confirm. OK Select the menu item and confirm. Enter system PIN if required (page 89). OK Select the menu item and confirm. OK Select the menu item and confirm. OK Select the menu item and confirm. OK Select the setting and confirm, e.g.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / appendix.fm / 17.11.2005 Appendix Appendix Care Wipe the base station and handset with a damp cloth (do not use solvent) or an antistatic cloth. Never use a dry cloth. This can cause static. Contact with liquid ! If the handset should come into contact with liquid, on no account switch the device on. Remove all batteries immediately. Allow the liquid to drain out of the device, and then pat all parts of the device dry.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / appendix.fm / 17.11.2005 Appendix What has happened when … Possible Cause … the divert conditions are not displayed for call diversion? Internal call diversion is activated. Possible solution Activate external call diversion (page 98). Apply to have this activated by the network provider.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / appendix.fm / 17.11.2005 Appendix Service (Customer Care) You can get assistance easily when you have technical questions or questions about how to use your device by using our online support service on the Internet at: www.siemens.com/gigasetcustomercare or by referring to the section entitled Questions and answers in this manual (page 127). If the device needs to be repaired, please contact one of our Customer Care Centers: Abu Dhabi. . . . . . . . .
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / appendix.fm / 17.11.2005 Appendix Your Gigaset is intended for operation in the countries indicated on the underside of the product and on the packaging. Country-specific conditions have been taken into account. Authorisation This device is intended for the ISDN telephone connection in the UK. Country-specific requirements have been taken into consideration. We, Siemens Home and Office Communication Devices GmbH & Co.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / appendix.fm / 17.11.2005 Appendix Power consumption Operating status CX203isdn CX253isdn Idle status Internal connection between base station (via receiver) and a handset External connection on base station via receiver External connection on base station using handsfree External connection on base station via handset External connection on base station via receiver and two-way recording on answering machine 2.5 W 2.6 W 2.6 W 2.7 W 2.7 W 2.7 W 2.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / appendix.fm / 17.11.2005 Appendix Creating and editing text You can create and edit text in a number of ways: ◆ The cursor is controlled with u v t s. ◆ Characters (to the left of the cursor) are deleted with ß . ◆ Characters are added to the left of the cursor (page 10). ◆ To switch from upper case to lower case letters, press the P key before you enter the letter. Pressing the P key again switches from lower case to upper case.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / appendix.fm / 17.11.2005 Appendix ◆ The purchase receipt, together with the date of purchase, shall be required as evi- dence for invoking the Guarantee. Claims under the Guarantee must be submitted within two months of the Guarantee default becoming evident. ◆ Ownership of devices or components replaced by and returned to Siemens shall vest in Siemens. ◆ This Guarantee shall apply to new devices purchased in the European Union.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / appendix.fm / 17.11.2005 Appendix loads). User manuals and any software supplied on a separate data medium shall be excluded from the Guarantee. ◆ The purchase receipt, together with the date of purchase, shall be required as evidence for invoking the Guarantee. Claims under the Guarantee must be submitted within two months of the Guarantee default becoming evident.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / menuetree.fm / 17.11.2005 Menu Tree Menu Tree Main menu In base station idle status press i (open menu): SMS Write message Inbox 2/5 Outbox 2 Available memory Reminder Appointment editor Audio Ringer Volume Ringer melody Handset Volume Vol.Loudspeaker Advisory tones Key Beeps Confirm. Beep Error Beep Costs Cost overview Type of calcul. Units cent.off. Costs cent.off. No rate Rate --.Rate --- Last charge Settings Language Contrast Autom.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / menuetree.fm / 17.11.2005 Menu Tree "Set base" submenu To begin: with the base station in idle status press v Set base OK or i N: Status Callback Withhold no. Call forwarding Ext.occupations AM1 on AM2 on AM3 on ‰ = on Missed calls (phone number list) -> Caller list menu (page 40) Accepted calls (phone number list) -> Caller list menu (page 40) Call preparat. Temp.withhold MSN next call Temp. keypad Canc. call park Ext. call forw.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / menuetree.fm / 17.11.2005 Menu Tree Night service List of MSNs Activate? Forward. dest. or Deactivate? – if night service is activated External Number editor Internal List of handsets Answering mach. List of handsets Start time End time Sat/Sun all day Settings Security Change PIN Authorisation Enter PIN List of Internal users Unrestricted Incoming only Internal only Emergency nos.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / menuetree.fm / 17.11.2005 Menu Tree ISDN settings Set up MSN List of all set up MSNs Edit entry Ringer melody Delete entry Display entry Withhold no. Forward. dest. Lg.-dist. code Int. enq. call Ext. enq. call Transfer(ECT) Forward. base Forward. netw. Reject all Busy on busy Auto.forwarding (Enter phone number) National : 0 Change number Delete number Internat.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / menuetree.fm / 17.11.2005 Menu Tree "Answering mach." submenu To begin: with the base station in idle status press i Answering mach. OK or i O, select an answering machine, e.g. AM1, and confirm with OK. Messages List of all messages AMx Continue Delete message Call back Call-by-Call Repeat Del.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / menuetree.fm / 17.11.2005 Menu Tree Settings Message/Memo Message length Time control Time stamp Activate? Mon - Fri 1 minute 2 minutes 3 minutes Maximum or Deactivate? – if time control is activated List of four adjustable Select ann. Announceme nt 1 time periods Announceme nt 2 Announcem. only AM off Start time Saturday Sunday No. of rings As for Mon-Fri Ann. 1 24h Ann. 2 24h Ann.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / menuetree.fm / 17.11.2005 Menu Tree Phonebook key and last number redial key Press the Phonebook key h or the last number redial key k, select an entry with sand press W to open the corresponding menu.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / SAG_Accessories.fm / 14.11.2005 Accessories Accessories Gigaset S44 handset ◆ Illuminated colour display (4096 colours) ◆ Graphic main menu with icons ◆ Illuminated keypad ◆ Handsfree mode ◆ Polyphonic ringer melodies ◆ Phonebook for around 200 entries ◆ SMS (CLIP must be enabled) ◆ Voice dialling ◆ PC interface for managing Phonebook entries ◆ Headphone socket www.siemens.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / SAG_Accessories.fm / 14.11.2005 Accessories Gigaset C34 handset Illuminated graphic display Polyphonic ringer melodies Handsfree mode Phonebook for around 100 entries SMS (CLIP must be enabled) Room monitor Timer www.siemens.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / SAG_Accessories.fm / 14.11.2005 Accessories Gigaset M34 USB data adapter The Gigaset M34 USB is used to establish a wireless connection between your PC and your Gigaset. This allows: ◆ wireless Internet surfing on your PC, ◆ convenient configuration of your Gigaset on the PC ◆ management of handset directories, ◆ management of call lists (journal), ◆ use of the dialler blocker to protect against unwanted high-cost connections. www.siemens.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / glossary.fm / 14.11.2005 Glossary Glossary A Added-feature connection ISDN connection that offers three more services than the standard connection: Call forwarding, transfer of charges after the connection, and a T-mailbox. AM PIN Abbreviation for answering machine PIN AOC-D Advice of Charge: During the Call. Transfers the charge information during the connection. AOC-E Advice of Charge: At the End of the Call.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / glossary.fm / 14.11.2005 Glossary Call diversion (call forwarding) can be set up individually for each separate phone number (MSN) (to your mobile phone when on holiday, to the office, to a neighbour etc.). This is carried out at the network provider's local exchange. This means the call never reaches the original destination.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / glossary.fm / 14.11.2005 Glossary Capture Performance feature "Identify/capture". MCID stands for "Malicious Call Identification". If you receive annoying calls, you can have the telephone exchange store the caller number. This performance feature must be requested from the network provider.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / glossary.fm / 14.11.2005 Glossary COLP (Connected Line Identification Presentation) User A calls User B. B's phone number is displayed on A's telephone. If, for example, B has programmed call forwarding to C, and the dialled number and transmitted number are not the same, then C's phone number is displayed if C permits this phone number to be displayed.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / glossary.fm / 14.11.2005 Glossary H Handsfree A phone's handsfree set not only permits open listening but also allows you to talk to the person on the other end without lifting the receiver by means of an integrated microphone. This means others present in the room can also participate in the conversation. Hold (Hold the line). Interrupts and re-instates an existing connection. In particular, it permits enquiry calls and toggling between calls.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / glossary.fm / 14.11.2005 Glossary M MCID (Malicious call identification) See "Capture". MSN Multiple Subscriber Number. The phone numbers belonging to a multiple ISDN connection. Each terminal is addressed separately, e.g., a separate number for a fax machine. Three MSN's are included in the basic price of a standard and addedfeature connection. Up to ten MSN's can be assigned to one ISDN connection.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / glossary.fm / 14.11.2005 Glossary P Parking A call is parked when you want to unplug the telephone during a call, or you want to continue your call from another telephone with the same connection. The connection is retained while it is parked.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / glossary.fm / 14.11.2005 Glossary S S0 Bus Four-wire ISDN connection wiring. It provides two B-channels and one D-channel. Up to twelve ISDN outlets can be connected to it, on which up to eight terminals can be operated at the same time. Standard connection ISDN connection with a series of services such as call waiting, three-party conference, or callback on busy. See also "Comfort connection". T Three-party conference 3PTY, three-party.
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / SIX.fm / 14.11.2005 Index Index A Access code . . . . . . . . . . . . . . . . . . 124 Accessories . . . . . . . . . . . . . . . . . . . 142 Activate SMS send centre . . . . . . . . . . . . . . 49 Activating Identify caller . . . . . . . . . . 26 Added-feature connection . . . . . . . . 145 Adjusting the loudspeaker volume . . 111 Advisory tones Activate/deactivate. . . . . . . . . . . . 113 Confirmation tone . . . . . . . . . 10, 113 Error tone . . . .
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / SIX.fm / 14.11.2005 Index Care . . . . . . . . . . . . . . . . . . . . . . 127 Connecting . . . . . . . . . . . . . . . . . . . 8 Installation . . . . . . . . . . . . . . . . . . . 7 Installing . . . . . . . . . . . . . . . . . . . . . 6 Menu system . . . . . . . . . . . . . . . . . . 9 Operate from handset . . . . . . . . . . 11 Operating . . . . . . . . . . . . . . . . . . . . 9 Preparing for use . . . . . . . . . . . . . . . 7 Setting . . . . . . . .
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / SIX.fm / 14.11.2005 Index Charge detail display . . . . . . . . . . . . 147 Charges, see Call charges Check Software version . . . . . . . . . . . . . 109 Status of settings . . . . . . . . . . . . . 109 CLI . . . . . . . . . . . . . . . . . . . . . . . . . 147 CLIP . . . . . . . . . . . . . . . . . . . . . . . . 147 CLIR . . . . . . . . . . . . . . . . . . . . . . . . 147 CNIP . . . . . . . . . . . . . . . . . . . . . . . . 147 COLP . . . . . . . . . .
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / SIX.fm / 14.11.2005 Index Locating . . . . . . . . . . . . . . . . . . . 127 Receiving SMS . . . . . . . . . . . . . . . . 60 Tone . . . . . . . . . . . . . . . . . . . 10, 113 When receiving an SMS . . . . . . . . . 60 When sending a text message. . . . . 59 Escape key . . . . . . . . . . . . . . . . . . . . 10 Exchange . . . . . . . . . . . . . . . . . . . . 148 External Call . . . . . . . . . . . . . . . . . . . . . . . . 19 Enquiry call . . . . . . .
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / SIX.fm / 14.11.2005 Index End call . . . . . . . . . . . . . . . . . . . . . 19 External. . . . . . . . . . . . . . . . . . . . . 19 Internal . . . . . . . . . . . . . . . . . . . . . 19 To several users . . . . . . . . . . . . . . . 27 Manual last number redial . . . . . . . . . 38 Mark as "new" Message (answering machine) . . . . 69 MCID, see Capture Medical appliances . . . . . . . . . . . . . . . 6 Melody (ringer tone) . . . . . . . . . . . .
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / SIX.fm / 14.11.2005 Index View and change entry . . . . . . . . . . 36 Pickup (AM) . . . . . . . . . . . . . . . . . . . 82 PIN . . . . . . . . . . . . . . . . . . . 12, 13, 151 PIN (answering machine), see AM PIN Play back Announcement (answering machine) . . . . . . . . . . . . . . . . . . . 63 Memo (answering machine) . . . . . . 67 Message (answering machine) . . . . 65 Playback speed (AM) Setting . . . . . . . . . . . . . . . . . . . . .
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / SIX.fm / 14.11.2005 Index Setting Answering machine . . . . . . . . . . . . 74 Appointment . . . . . . . . . . . . . . . . . 85 Base station . . . . . . . . . . . . . . . . . . 15 Date . . . . . . . . . . . . . . . . . . . . 16, 84 Display . . . . . . . . . . . . . . . . . . . . 110 Enquiry call . . . . . . . . . . . . . . . . . 104 Playback speed (AM) . . . . . . . . . . . 68 Receive MSN . . . . . . . . . . . . . . . . . 17 Send MSN . . . . . . . . . .
SX303/353isdn / englisch / A31008-X353-B100-2-7619 / SIX.fm / 14.11.2005 Index Activate/deactivate . . . . . . . . . . . . . 80 Define announcement . . . . . . . . . . 79 Define start time (Mon-Fri) . . . . . . . 79 Setting . . . . . . . . . . . . . . . . . . . . . 79 Setting for Sat and Sun . . . . . . . . . . 80 Time display Activate/deactivate . . . . . . . . . 84, 111 T-NetBox, view message . . . . . . . . . 108 Toggling . . . . . . . . . . . . . . . . . . 29, 152 Tone Confirmation . . . . . . . . . .
