Data Sheet for Product

Intelligent Thermal Detector 6176
s Industry, Inc.
Building Technologies Division
s
Data Sheet
Fire Safety & Security Products
Intelligent Detection Devices
Intelligent Thermal Detector
[
For use with FireFinder
®
XLS and MXL Panels]
Model FPT-11
Product Overview Specifications
The Intelligent Thermal Detector (Model FPT-11) from
Siemens
─ Fire Safety provides an advanced method of
detection, address programming and supervision
─
combined with sophisticated f
ire alarm control panel
(FACP) communication. Model FPT-11 uses a state-of-the-
art thermistor that provides up to 135°F (57.2°C) rate-
compensated temperature.
Model FPT-11 is compatible with Model DPU and FP
I-32
Field Programmer / Testers, which are compact, portable
and menu-driven accessories that make programming
and testing detectors faster, easier and more reliable
than other methods.
Each of these field programmers / testers eliminate the
need for cumbersome, unreliable mechanical
programming methods, and they reduce installation and
service costs, via e
lectronically erasable programmable
r
ead-only memory (EEPROM), and can test Model FPT-11’s
performance (for proper function) before the detector is
even installed. Moreover, mechanical-addressing
mechanisms
─ such as program jumpers, DIP switches or
rotary dials
─ are no longer necessary to use.
Model FPT-11 is a plug-in, two-wire thermal detector that is
compatible with FireFinder XLS and MXL FACPs. Each
Model FPT-11 detector has microcomputer-chip
technology, as well as highly stable, solid-state electronic
circuitry.
Model FPT-11 utilizes a modern, accurate and shock-
resistant thermistor to sense temperature changes. This
electronic sensing method virtually eliminates thermal lag
associated with mechanical-temperature sensing devices,
and provides almost instantaneous temperature
information to the FACP.
Model FPT-11 is a 135°F (57.2°C) rate-compensated
detector. The microprocessor for Model FPT-11 detector
uses the EEPROM means to store the detector’s address.
Communications within the detector, as well as between
Model FPT-11; the FACP, or with each field programmer /
tester, are supervised and safeguarded against disruption
by reliable microprocessor-based error-checking routines.
Additionally, the microprocessor supervises all EEPROM
memory locations, and provides a high tolerance to
EEPROM faults.
 Innovative technology provides high-speed,
fault-tolerant system / detector
communications
 Compatible with Model DPU or FPI-32
field programmer / tester
 Multi-color, detector-status
l
ight-emitting diode (LED)
 Optional fully-programmable relay
and audible bases
 UL and ULC Listed;
FM, CSFM & NYCFD Approved
 Microprocessor-based design
 Two-wire operation
 Rate compensated
ARCHITECT AND ENGINEER SPECIFICATIONS