User Manual

P/N 315-080240-5
Installation Instructions
Base Detector Lock for
Models DB-3S and DB-4
SECTION A-A
ASSEMBLY OF DB-3S BASE DETECTOR LOCK
PARTS
INSTALLATION KIT P/N 545-080117
PLASTIC TAB P/N 195-280120
SPRING P/N 385-180119
INSTRUCTION SHEET P/N 315-080240
POLY BAG P/N 470-014880
TOOLS REQUIRED
SCREW DRIVER AND NEEDLENOSE PLIERS
INSTALLATION PROCEDURE
NOTE: THE BASE MUST BE REMOVED FROM CEILING TO
INSTALL THE LOCKING DEVICE.
THESE INSTRUCTIONS APPLY TO BOTH THE DB-3S
AND DB-4 BASES.
1. REMOVE DETECTOR FROM BASE, IF DETECTOR IS IN THE
BASE.
2. POSITION SPRING
1
* IN MODEL DB-3S SLOT AS SHOWN.
3. POSITION PLASTIC TAB
2
* IN THE SAME SLOT OVER THE
SPRING.
4. PRESS THE PLASTIC TAB FIRMLY INWARD AND LET IT GO.
(THE TAB WILL AUTOMATICALLY LOCK IN PLACE).
5. REINSTALL DETECTOR TO BASE. (POSITION OF DETECTOR
COVER WILL BE AS SHOWN IN SECTION A-A DOTTED LINE).
* CIRCLED NUMBER REFERS TO PART NUMBERS IN
ILLUSTRATION.
REMOVAL PROCEDURE
1. PRESS THE PLASTIC TAB DOWN WITH SCREW DRIVER TO
CLEAR DETECTOR SLOT AND SIMULTANEOUSLY TURN THE
DETECTOR COUNTER CLOCKWISE.
2. REMOVE THE DETECTOR FROM BASE.
3. REMOVE THE SCREW DRIVER.
4. HOLD THE PLASTIC TAB WITH NEEDLENOSE PLIERS AND
PULL OUT. PULL OUT THE SPRING WITH NEEDLENOSE
PLIERS.
5. REINSTALL DETECTOR TO BASE.
Siemens Industry, Inc.
Building Technologies Division
Florham Park, NJ
Siemens Building Technologies, Ltd.
Fire Safety & Security Products
2 Kenview Boulevard
Brampton, Ontario
L6T 5E4 Canada
A
A
1b
6
5
1a