Data Sheet for Product

Intelligent Fi r ePrint
TM
Detector 6175
s Industry, Inc.
Building Technologies Division
s
Data Sheet
Fire Safety Products
Intelligent Detection Devices
Intelligent FirePrint
TM
Detector
[For use with FireFinder
®
XLS and MXL
®
Panels]
Model FP-11
Product Overview
The Intelligent Fire Detector (Model FP-11) is a
highly evolved detection system that provides a
very sophisticated level of fire protection, along
with superior immunity to nuisance-alarms.
Model FP-11 utilizes highly developed detection
technology that allows the detector to distinguish
non-threatening deceptive phenomena (i.e. −
cigarette smoke) from actual fire hazards, while
optimizing detection for the area of its intended
zone. Model FP-11 uses state-of-the-art
microprocessor circuitry with error check; detector
self-diagnostics, and supervision programs.
Model FP-11 is compatible with the Siemens −
Fire Safety Model FP
I-32 upgrade kit or Siemens’
field-programmer / tester, Model DPU / FPI-32,
which is a compact, portable and menu-driven
accessory for efficiently programming and testing
detectors electronically.
The upgrade kit (Models DPU or FPI-32) eliminates
the need for cumbersome, unreliable mechanical
programming methods, as well as reduces installation
and service costs by electronically programming and
testing the detector prior to installation.
Specifications
Model FP-11 is a plug-in, two-wire and multi-sensor
detector with photoelectric and thermal inputs that is
compatible with the FireFinder XLS and MXL family
of FACPs. Each detector consists of a dust-resistant,
field-cleanable photo chamber; a solid-state, non-
mechanical thermal sensor, and microprocessor-based
electronics with a low-profile plastic cover and base.
Model FP-11 utilizes state-of-the-art ASI C and surface-
mount technology for maximum reliability.
Every Model FP-11 fire detector is shipped with a
protective dust cover. Model FP-11 fire detector
utilizes an infrared light-emitting diode (
IRLED), and
light-sensing photodiode.
•
Multi-color, detector-status
light-emitting diode (LED)
• Two-wire operation
•
UL and ULC Listed;
FM, CSFM & NYCFD Approved
ARCHITECT AND ENGINEER SPECIFICATIONS
•
Multi-criteria fire detection
• Sophisticated ‘detector intelligence’
• Remote-sensitivity-measurement capability
• Easily programmed to match specific hazard profiles
from the fire-alarm control panel (FACP)
• FirePrint™ technology to distinguish between
deceptive phenomena and an actual fire
• Pre-Alarm reporting based upon fire profile selected
• Field-cleanable chamber with replaceable chamber parts
• System-logic activation based upon any of three (3) inputs
from the detector (smoke, heat or neural network)
• Supports software-based, automatic environmental compensation
 EnviroLINK
• Compatible with field programmer / tester
 Model DPU / FPI-32 Upgrade Kit
• Backward compatible with older MXL systems
 Rev. 2 and above
• Optional fully programmable relay base, audible base
and duct housing