Data Sheet for Product

ManualsBrandsSiemens ManualsFire - Addressable detectors and basesDB2-HR Detector Relay Base, Installation Instructions

Siemens Data Sheet 6154

Smart Infrastructure - Building Products usa.siemens.com/fire

Desigo® Fire Safety

Detectors and Peripherals

Multi-Criteria Fire Detector [with ASAtechnology™]

Model FDOOT441

Product Overview

Model FDOOT441 is an advanced, flexible

multi-criteria fire detector incorporating a

redundant optical / thermal sensor. Additionally, Model FDOOT441

utilizes

ASA

technology™ a distinctive forward / backward, light-scattering technology that

provides

high-tech, unparalleled fire detection to the widest range of fire types

allowing the detector to distinguish non

-threatening deceptive phenomena.

Each FDOOT441

unit is UL 268 7th edition listed incorporating advanced built-in

ISO

technology™ - True Class-X SLC operation (use is optional) greatly improving

system

reliability and circuit integrity while providing advanced addressable fault

finding.

The unit may be

programmed as a high-sensitivity detector, with a 0.2 %/ft Pre-Alarm

threshold and 1.0

%/ft Alarm threshold thus meeting NFPA 76 requirements

(

Standard for the Fire Protection of Telecommunications Facilities) as a Very Early

Warning Fire Detector

(VEWFD).

Every

FDOOT441 unit is a multi-purpose, addressable detector providing a

complete

contemporary solution meeting fire detection needs for commercial

facilities.

Each individual FDOOT441 sensor can be field programmed for

simultaneous and / or independent functionality, depending upon the precise

customer and application requirements.

or example, the detector can simultaneously utilize the optical and heat sensors

for enhanced multi

-criteria fire detection, as well as provide independent outputs

for heat detection. Any combination of the sensors is possible.

he detector is very versatile, and meets the following fire-industry standards:

• Multi-criteria fire detector ( UL 268 7

edition)

• Heat detector ( UL 521) with five (5) possible field-selectable

temperatures; combined with four (4) rate-of-rise options

• Direct, in-duct (plenum) detector ( UL 268A)

• Supervisory monitoring for temperature ranges

• NFPA 76 (Telco Standard) as VEWFD

• Low-temperature warning signal at 40°F

(4.4°C) for sprinkler systems, per NFPA 25 /

NFPA 72

For instance, the signals from the detector’s

sensors are monitored and processed via

the

ASA–patented algorithm technology,

which combines the signals into

a neural

network to create an intelligent, multi

criteria addressable detector.

Model FDOOT441

Multi-Criteria Fire Detector

[with ASAtechnology]

Architect & Engineer Specifications

 UL 268 7

edition Listed, ULC Listed; FM

(#3230, #3210), CSFM (#7272-0067:0258)

Approved

 Built-in ISOtechnology™

 Advanced multi-criteria fire detector

that has dual-optical thermal sensors

 Differentiates between deceptive

phenomena and an actual fire

(nuisance-alarm avoidance)

 Provides enhanced detection

via forward-and-backward

light-scattering technology

 Complies with NFPA 76 (Telco standard)

as `VEWFD’ high-sensitivity detector

 UL Listed and FM Approved as a multi-

criteria and `VEWFD’ fire detector

 UL 268A Listed for direct air-duct

use (4,000 FPM)

 Supervisory temperature-

monitoring feature

 Remote sensitivity-measurement capability

 Automatic environmental compensation

 Up to 22 application profiles

 Tri-color detector-status light-

emitting diode (LED)

 Polarity insensitive via SureWire™

 Low-temperature warning for sprinkler

systems, per NFPA 25

 Meets UL, NFPA 72 requirements for

sensitivity self-monitoring

 Compatible with:

- Model DB-11

—series mounting bases

- Model 8720 / DPU (device

programmer / loop tester)

 Restriction of Hazardous Substances

(RoHS compliant)

 Responds to both flaming and

smoldering-fire signatures

Summary of content (6 pages)

PAGE 1
Desigo® Fire Safety Detectors and Peripherals Multi-Criteria Fire Detector [with ASAtechnology™] Model FDOOT441 Architect & Engineer Specifications  UL 268 7th edition Listed, ULC Listed; FM (#3230, #3210), CSFM (#7272-0067:0258) Approved  Built-in ISOtechnology™  Advanced multi-criteria fire detector that has dual-optical thermal sensors  Differentiates between deceptive phenomena and an actual fire (nuisance-alarm avoidance)  Provides enhanced detection via forward-and-backward light-scattering tec
PAGE 2
1. Heat sensors 4. Forward scatterer 2. Receiver 3. Backward scatterer 5. Labyrinth Model FDOOT441- Forward-and-Backward Light-Scattering Technology Product Overview – (continued) The encompassing result is an intelligent detector that provides enhanced detection capability to a wide range of products of combustion – while offering unsurpassed rejection to nuisance-alarm sources, including: dust | steam | cooking aerosols and other deceptive phenomena that could cause false alarms.
PAGE 3
Operation – (continued) Field-Device Programmer / Test Unit Every Model FDOOT441 intelligent detection device is compatible with the Siemens field-device programmer / test unit (Model DPU | 8720), which is a compact, portable, menu-driven accessory for electronically programming and testing these addressable detectors promptly and reliably. For instance, the field technician selects the accessory’s program mode, and enters the desired address.
PAGE 4
Operation – (continued) Based on the results of the monitoring, the LED indicator flashes the following: FLASH INTERVAL FLASH COLOR CONDITION GREEN: Normal supervisory operation. Smoke sensitivity is within rated limits. 10 YELLOW: Detector is in trouble and needs replacement. 4 RED: Alarm condition 1 NO FLASH: Detector is not powered. – [in seconds] denotes LED can be turned OFF Please follow the corresponding description of the panel used.
PAGE 5
Technical Data OPERATING TEMPERATURE: +32° HEAT DETECTOR RANGE: +135° PROGRAMMABLE SUPERVISORY TEMPERATURE WARNING: DETECTOR SENSITIVITY RANGE: AIR VELOCITY: Open Area: Direct-in-duct: – +120°F (0° – +49°C) (+57° – +175°F – +79°C) -4° – +120°F (-20° – +49°C) (available with compatible FACPs) UL Listed: 0.88 to 3.35 % / ft. NFPA 76 (Telco) VEWFD: 0.2 % / ft. Pre-alarm 1.0 % / ft.
PAGE 6
NOTICE – The information contained in this data-sheet document is intended only as a summary, and is subject to change without notice. The product(s) described here has/have a specific instruction sheet(s) that cover various technical, limitation and liability information. Copies of install-type, instruction sheets – as well as the General Product Warning and Limitations document, which also contains important data, are provided with the product, and are available from the Manufacturer.