User Manual

2/4
Siemens Building Technologies SGU-NIOPEN under OS/2 (Warp) CA1N9721E
Building Automation 01.2002
Functions
The VISONIK is run with the software INSIGHT, DCS on the PLD hardware units as
their platform(s). In addition, the SGU-NIOPEN SW runs on the same or a separate PC.
Within the VISONIK, data points (with NIOPEN specific parameters) are treated as
genuine VISONIK data points.
SGU-NiOPEN
$d..<->RS..
Nixxx
3rd party
system
OS-LayerINSIGHT
DCS
Terminal
channel
$T..
Virtual
mother
BPS
$d..
Native
BPS
$d..
SGU-NIOPEN
SGU
Pipe or
RS232
SGU
Native
BPS
$d..
Nixxx
RS232
..
..
..
3rd party
system
VISONIK
Same or separate PC
The Native BPS
may be treated like
any other BPS
(PRV).
Native
BPS
$d..
Multiple drivers
possible, restricted
mainly by the number
of com ports available
Summary of types
The SGU-NIOPEN SW is available for OS/2 (versions please see "Technical data,
version compatibility") and also for Windows NT, for details see please Data Sheet
CA1N9731.
Ordering procedure
The SGU-NIOPEN SW is available from the intranet.
Design features
$d30’VIP200’56 Parint(1)
feedback value 0…65535, or scan priority 1…5
Parint(2)
NITEL-OPEN address, port or iz id, 1..255
Parint(3) NCRS block type 1…13, (e.g. RSDI…RSS, ..)
Parint(4) NCRS block nr., 0…2047
RS register nr.
NIS = 1..255 (virtual)
DX = RSCOS = 100..255
UI = 1..255
UO = 1..255
DI = 1..255
DO = 1..255
DS = 100..255
US = 100..255
UP = 1..255
UZ = 100..255
RSS = 255
RS module nr.
NIS = 0
DX = RSCOS = 1..255
UI = 1..255
UO = 1..255
DI = 1..255
DO = 1..255
DS = 1..255
US = 1..255
UP = 1..255
UZ = 1..255
RSS = 1..255
VISONIK point
equivalent to RS
register type:
VISONIK = RS
VIP = NIS, UP
DI = DI, DX, RSCOS, RSS
DO = DO, DS
AI = UI, UAI, UZ
AO = UO, UAO, US
BPS
nr.
Parint
(3)
NIS = 13
DX = RSCOS = 7 , scan priority = parint(1)
UI = RSUAI = 4 , scan priority = parint(1)
UO = RSUAO = 5 , scan priority = parint(1)
UO = RSUAO = 6, feedback value = parint(1)
DI = RSDI = 1 , scan priority = parint(1)
DO = RSDO = 2 , scan priority = parint(1)
DO = RSDO = 3, feedback value = parint(1)
DS = RSDS = 8 , scan priority = parint(1)
US = RSUS = 9 , scan priority = parint(1)
UP = RSUP = 10 , scan priority = parint(1)
UZ = RSUZ = 11 , scan priority = parint(1)
RSS = 12 , scan priority = parint(1)
VISONIK Group nr.
VISONIK element or
instance nr.
Software overview
Mapping and support
data point types