User Manual

3/4
Siemens Building Technologies SGU-NIOPEN under OS/2 (Warp) CA1N9721E
Building Automation 01.2002
Engineering Datapoints
3rd party
NIxxx
SGU-NIxxx
DCS
DCS Loader
Infolist
Project data
Project data
As is data
SCRIPT.vis
NOETOOL
normal
communication
∆
ProtocolProtocol
Application External Kitchen
(MainExt)
Appl.
Protocol
(MainProt)
Appl.
Protocol
(MainProt)
Application External Kitchen
(MainExt)
Dialogue (MainSvr)
Messages (MainRoot)
Life (Life)
Zuger kitchen (MainZk)
VISONIK Communication (MainAddp)
…
Solution
s
pecif
ic
S
GU Platfor
m
Watchdog (SetUp)
Dialogue (MainSvr)
Messages (MainRoot)
Life (Life)
VISONIK Communication (MainAddp)
…
NT-layer & Ansi-C Library
Operating System (e.g. OS/2, QNX, WinNT, …)
……
Zuger kitchen (MainZk)
Watchdog (SetUp)
(MainProt) (MainProt)
Appl.
Appl.
For the VISONIK-DCS, the max. (max. number –1) of available BPS (Building Process
Stations) and data points has to be taken into account.
The performance of the VISONIK-DCS is improved, if the SGU-NIOPEN software is run
on a separate PC.
The software contains 3 packages: OS-Layer, SGU, SGU-NIOPEN.
Software Electronic
disk label
File for
installation
Remark
OS-Layer OSLDSK1,
OSLDSK2
A:\Install.exe
Install 1
st
, select all,
g:\OS-Layer
SGU SGU4DSK1,
SGU4DSK2
A:\Install.exe
Install 2
nd
, select all,
g:\SGU\V4
SGU-NIOPEN DSK1
A:\Install.exe
Install 3
rd
, select all,
g:\SGU\V4\SGU-NIOPEN.
Please see the engineering notes for details CA1J9721
Tools
SW layers
(SGU-NIOPEN equals
MainProt and MainExt)
Planning
Installation