User Manual

Basic hardware
The data and communication server is delivered with the following hardware
components:
We reserve the right to make changes to the basic hardware configuration.
Required number of computer types
PLD8....
Tower Rack
Order number
Basic PC
Caution: The computers are delivered without keyboard and monitor!
– Housing (tower or 19” rack).
1 1
– Mouse
1 1
– CPU hard drive supporting
- 1 mouse (PS/2)
- 1 keyboard (PS/2)
- 1 LAN, 1x RJ45
- 2 COM port V.24 (9-pin)
- 1 Centronics parallel interface (25-pin)
- 3 USB interfaces (2 x rear, 1 x front panel)
- 1 SCSI 1 channel Ultra320 SCSI for HDDs with RAID1.
- 2 I/O slots PCI-X 64-bit / 66 MHz, long; (3,3V)
- 3 I/O slots PCI 32-bit / 33 MHz, (2 x short, 1 x long (5V)
- 1 I/O slot express (1x1)
- 1 IDE Controller, 2 x ATA100 (for CD / DVD drives)
- 1 VGA graphics
1 1
– Pentium 4 processor / memory (SDRAM)
3,6 GHz / 1024 MB memory
1 1
– PC-M multifunction card with:
- Watchdog
- Radio clock
- Auto reset WD
- Front control panel including cable set
1 1 ALD8.M/KIT
Network card on main disk.
1 1
Equipment for connection of BLN and terminal server.
Storage media:
– 3.5“ / 1.44 MB diskette drive.
1 1
– DVD-DUAL/DL 5.25” drive, 40/24/40x 16x/16 8x4 4/2.4 ATAPI.
1 1
– Hot plug hard drive 73 GB (Ultra2wide).
1 1 ALD8.F
Basic software
The data and communication server is delivered with the following preinstalled software:
Computer type PLD8. Tower Rack
– Windows XP Professional
x x
– VISONIK software (functionality according to version and computer type).
x x
– VISONIK DCS license for 5 process stations.
x x
– VT100 emulator to connect terminals in a window to $T1.
x x
– Norton Ghost 2003
x x
3/6
Building Technologies Group PL DCS Data und communication server D8.TOWER / RACK CM2N8561en
28.02.2005