User Manual

Gr
aphics
Operating interface to CAD system
3
A6V11878994_en_a_42 15 | 33
3 Graphics
3.1 Operating interface to CAD system
The user interface must allow users access to various system diagrams and floor
plans using graphical depictions, menu selections, and data point assignments.
The graphics software must also permit the import of CAD symbols (DWG, DXF
format) or scanned images for use in the system.
Specified product: Siemens / Desigo CC or similar
3.2 Operating messages
Operating message must be able to be displayed and evaluated on the
management level. Graphics must be able to display data point states that are
overwritten by a local priority switch. This on data points that were developed to
supplying by local override.
Specified product: Siemens / Desigo CC or similar
3.3 Full graphics mode
A fully graphics-based management level with ergonomic and freely scalable
images must be available. The system must be developed to operating, monitor,
optimize, and log all connected automation stations in real time.
Specified product: Siemens / Desigo CC or similar
3.4 Graphics generation
Operators must be able to add, delete, and edit system graphics and state texts for
digital data points from the standard user interface without external or special tools.
Specified product: Siemens / Desigo CC or similar
3.5 Navigation
A hierarchy tree can support as an option navigation to the various graphic images.
Graphic displays must include the ability to dynamically zoom and switch among
various layers with different information.
Specified product: Siemens / Desigo CC or similar
3.6 In graphics commanding
The system must offer graphic objects which can be used to command or control
the system. At a minimum, sliders, buttons, text boxes, dropdown lists and radio
buttons must be included
Specified product: Siemens / Desigo CC or similar
3.6.1 Visualize the quality state in the plant graphics
A violation of energy efficiency limit values for measured values of primary plants
(e.g. centralized air handling, energy generation) must also be displayed in the
plant graphic directly on the application components or function.
The parameters for monitoring, evaluating and forming the quality state can be set
directly in the plant graphic based on read and write access rights. As an
alternative: Make possible the simple navigation to an appropriate user program.
Specified products: Siemens / Desigo CC or similar