User Manual

Scheduler programs
Management via
central scheduler programs
5
20 | 33 A6V11878994_en_a_42
5 Scheduler programs
5.1 Management via central scheduler programs
Operate all scheduler programs online from the management level to achieve
consistent, transparent operation of all integrated systems and subsystems.
Specified products: Siemens / Desigo CC or similar
5.2 Scheduler programs
The system must offer the ability to operate schedulers on automation stations as
well as support management station-based time scheduling.
Each currently used plant image must offer user-friendly scheduler operation.
Specified product: Siemens / Desigo CC or similar
5.3 Scheduling and override
Providing calendar type formats to simplify time and data planning and override
building operation is required. Time definitions must be located on the PC
workstation and building controller to ensure scheduling even if the PC is offline.
Providing override access through menus, graphical mouse, of function keys.
Providing the following operations at a minimum:
● Comprehensive support of all BACnet objects for scheduler, calendar, and
commands.
● Daily and weekly schedules
● Ability to compile multiple data points into a logical command group to simplify
scheduling (e.g. Building 1 Lighting)
● Planning predefined reports.
● Ability to plan at least 10 years in advance.
● Provide filters for schedulers by name, time, frequency, and schedule.
● Provide sorting schedulers by name and schedule type.
Specified product: Siemens / Desigo CC or similar
5.4 Customized scheduler program
The user can customize the schedule defining the operating mode for each plant.
Switching times are defined via weekly schedule. Overriding recurring weekly
schedules via local or global exceptions as well as operation via any operator unit
must be possible.
Specified products: Siemens / Desigo CC or similar
5.5 Customized calendar
Local or global calendar exceptions must be able to override the plant-specific
weekly scheduler program. Equal calendars must be assigned priority over each
other. Calendar operation must be possible via all operator units.
Specified products: Siemens / Desigo CC or similar
5.6 Create calendar online
Calendar programs must be able to be remotely created online to provide service
personnel a high level of flexibility.
Specified products: Siemens / Desigo CC or similar