Environmental Declaration

Building Automation
HVAC Products
Legal disclaimer: This declaration is for information purposes only.
The above information may be inaccurate or incomplete. Siemens Building Technologies Ltd. therefore does
not assume liability for any error or any consequences which may arise from the use of this information to the
maximum extent under the law.
If you require further information on environmental aspects and disposal, contact your local Siemens branch office.
Siemens Building Technologies CA2E3844en
12-Jul-01 page 2 of 2
Materials
total weight of device (*)
243 g
Plastics (PC+ABS) fiberglass-free, halogen-free top part and bottom part of
housing
93 g
ASA, fiberglass-free, halogen-free slider
1g
PA6
2 connection nipples (*)
3g
Rubber 2 O-ring seals (*)
<1g
Metals Aluminum heat sink on the circuit board (2 g)
Printed circuit boards FR4, containing halogens, SnPb solder circuit boards with components
150 g
Special components
Various connectors. on the circuit board. (40 g)
Differential pressure detector on the circuit board (*) (12 g)
Disposal
Do not dispose of the device as part of standard household garbage, but as
special waste from electrical and electronic components. This particularly applies
to electronic circuit boards.
Additionally, the law may mandate special treatment for specific components or
special treatment may be ecologically sensible.
Observe all local and applicable laws.
Material
(*) only on the RCX32.
Notes
Environmental benefits
Optimal room control results in energy savings.