Building automation and control systems System Catalog 2016 www.siemens.
Content 1 System functions – Desigo – the innovative system for highest efficiency and safety in the building – Desigo system topology – System functions for building automation – Trend and history function – Event management – Schedulers/calendar – Access rights – Monitoring functions – Communication – network 2 Management functions – Desigo CC – Desigo Insight – Informationsmanagement 3 Automation controls – Automation stations – Operator units – Desigo TX-I/O 4 Room automation – Desigo TRA –
Can old buildings be just as energy-efficient as new ones? Intelligent and energy-efficient building technologies from Siemens reduce emissions and costs, in any building.
A comprehensive offering for optimal building efficiency Dear Customers and Partners, In many countries, energy generation, distribution and consumption are issues of vital importance and receive top priority. Yet the challenges for the world’s energy markets could not be more different: Energy demand in the growth markets is increasing rapidly, but in developed countries the focus is on cost effectiveness and climate protection.
BACS efficiency classes – EN 15232 High energy performance BACS and TBM A Advanced BACS and TBM B Standard BACS C Non-energy-efficient BACS D BACS TBM Building Automation and Control System Technical Building Management System Cutting costs through energy efficiency The best way to lower operating costs is to consume less energy. Intelligent building automation technology from Siemens helps reduce the energy use by as much as 30 percent.
Energy-efficient applications Measurable and sustainable energy savings can be achieved only through control strategies developed on the basis of proven applications. Systems from Siemens are based on an extensive set of innovative functions. For example, the Desigo™ AirOptiControl application not only ensures good air quality and optimum room temperature but also reduces the required energy demand by as much as 50 percent.
Desigo – flexible and energy-efficient Efficient savings without sacrifices – with the Desigo building management system, you can save a great deal of energy while maintaining a pleasant room climate and optimizing comfort. 6 Desigo helps lower operating costs and cut energy consumption while maintaining optimum room conditions.
lnnovative room operator unit The IP-enabled room operator unit QMX7 with its intuitive touch-based operating concept and capacitive color display is the newest member of the Desigo TRA family. It offers a sleek, contemporary design, and its scope of functions can be configured as needed to customize the control of room disciplines. The room unit can be combined with the new compact room automation stations, and the Green Leaf symbol actively involves room users in the energy saving process.
Desigo CC management platform Desigo CC, the new management platform from Siemens, allows you to monitor and operate multiple disciplines in modern building systems efficiently and according to workflow. 8 The new Desigo CC building management platform is not only well-suited to control individual systems, it also allows you to integrate and intelligently link all building disciplines from heating, ventilation and air conditioning to lighting and shading, power, fire safety and security.
The user interface can be customized to personal preferences. The most important information is displayed first. Windows do not overlap, and all disciplines appear in the same window. Users benefit from an easy-to-understand visualization of all disciplines, and they save time since there is no need to switch applications. Desigo CC uses vector graphics for an attractive, high-resolution display of system elements, including full zoom functions. System graphics can be displayed in either 2D or 3D.
Synco 700 – communicating HVAC control Synco 700 supports the entire life cycle of small to medium-size buildings. The controllers can be extended and adapted at any time, thanks to their modular design and backward compatible communication. This way, investments can also be made in steps. 10 Being the heart of the building automation and control system, Synco™ 700 is responsible for the generation of heat and refrigeration, controls and monitors plants, and communicates via KNX.
Monitored energy efficiency Room users and facility managers can considerably influence energy consumption by switching the plant off during non-occupancy times or by matching the room temperature and the time schedule to the current occupancy times. Whatever the settings, an energy indicator shows the room’s energy efficiency state: Green means that the settings made are correct from the point of view of energy usage, orange indicates unfavorable settings. This way, deviations are always visible.
eu.bac system certification Planning Tools from Siemens Energy Performance Classification Tool Preliminary study Energy Efficiency Calculation Tool HVAC Integrated Tool Project planning Specification Text Selection Tool Bidding phase Project implementation Operation and modernization Supporting tools for the sales process Siemens offers extensive supporting tools for the entire planning and implementation process.
Overview of tools: Preparation of a project For initial customer contacts and preparatory steps, sophisticated tools and other means, such as brochures, technical documentation, guides and training courses, are available. EPC – Energy Performance Classification Tool The EPC Tool allows for a quick analysis of the existing building automation and control functions to assess the energy saving potential and the resulting payback time.
The Siemens Solution Partner program The Siemens Solution Partner program offers partners added value for all phases of a project. When talking to decision makers, considerable effort is required to persuade them of the values of your company. Siemens supports you when creating new business relations and when making efforts to stay at the top. Siemens cultivates long-term relationships with strong partners throughout the world.
Overview of benefits: Acquisition Akquise Planung Design Implementierung tation Wartung Services und Service Produkte und systems Systeme Products and Die Produktebasis, kombiniert mit leistungsstarken The solide comprehensive portfolio of products and systems, Programmierungs-Tools, Bibliotheken tools, und Modulen together with powerful programming libraries and erlauben überzeugende Lösungen für Ihre Kunden modules, es, enables you to develop convincing solutions zu for erstellen. your customers.
Type Overview Product Number Description 7411100280 Terminal covers Datasheet Page ACS790 Commissioning and plant operating software AP 118/01 Control Module Box‚ 1 slot for a sensor/actuator module‚ type RS or RL AP 221/10 Wall transmitter‚ EnOcean‚ titanium white AP 221/11 Wall transmitter EnOcean‚ with I/O-symbols‚ titanium white AP 221/12 Wall transmitter EnOcean‚ with up/down-symbols‚ titanium white 4-88 AP 221/30 Wall transmitter EnOcean‚ aluminum metallic 4-88 5-44 N5649 5-45 4-5
Type Overview Product Number Description DXR2.M09-101A Compact room automation station‚ BACnet/MSTP‚ 230 V‚ flat housing‚ 1 DI‚ 2 UI‚ 3 relay‚ N9206 3 AO Datasheet Page 4-28 DXR2.M09T-101A Compact room automation station‚ BACnet/MSTP‚ 230 V‚ flat housing‚ 1 DI‚ 2 UI‚ 1 relay‚ N9206 1 AO‚ 4 triac 4-28 DXR2.M10-101A Compact room automation station‚ BACnet/MSTP‚ 230 V‚ flat housing‚ 1 DI‚ 2 UI‚ 3 relay‚ N9206 4 triac 4-29 DXR2.
Type Overview Product Number Description Datasheet Page PXC00.D System controller BACnet/LonTalk N9222 3-12 PXC001-E.D System controller for the integration of KNX‚ M-Bus‚ Modbus or SCL over BACnet/IP N9223 3-12 PXC001.D System controller for the integration of KNX‚ M-Bus‚ Modbus or SCL over BACnet/LonTalk N9223 3-12 PXC100-E.D Automation station BACnet/IP‚ with up to 200 data points N9222 3-10 PXC100.D Automation station BACnet/LonTalk‚ with up to 200 data points N9222 3-10 PXC12-E.
Type Overview Product Number Description Datasheet Page QAM2120.600 Duct temperature sensor 6000 mm‚ LG-Ni1000 N1761 5-37 QAP21.2 Cable temperature sensor for high-temperature applications (180°C) N1833 5-37 QAP21.3 Cable temperature sensor silicone 1.5 m‚ LG-Ni1000 N1831 5-37 QAP22 Cable temperature sensor PVC 2 m‚ LG-Ni1000 N1831 4-71 QAT22 Window pane temperature sensor N1830 5-37 QAW740 Room unit with KNX bus N1633 6-31 QAX30.
Type Overview Product Number Description Datasheet Page QPA84 Indoor air quality controller with integrated VOC sensor for mixed gas N1571 5-40 QVE1900 Flow switch for use in hydraulic systems‚ PN10‚ DN32...200 N1592 5-21 QVE1901 Flow switch for use in hydraulic systems‚ PN25‚ DN20...200 N1594 5-39 QVM62.1 Duct sensor for air velocity N1932 5-38 QXA2601 Condensation monitor‚ AC/DC 24 V N3302 4-71 4-71 QXA2602 Condensation monitor‚ AC/DC 24 V‚ with remote sensor head (cable length 1.
Type Overview Product Number Description Datasheet RMU710B-4 Universal controller‚ 1 control loop‚ with languages cs‚ hu‚ pl‚ sk‚ ru‚ bg N3150 Page 5-23 RMU710B-5 Universal controller‚ 1 control loop‚ with languages sr‚ hr‚ sl‚ ro‚ el‚ tr N3150 5-23 RMU710B-6 Universal controller‚ 1 control loop‚ with language zh N3150 5-23 RMU720B-1 Universal controller‚ 2 control loops‚ with languages de‚ fr‚ it‚ es N3150 5-23 RMU720B-2 Universal controller‚ 2 control loops‚ with languages de‚ en‚ fr‚
Type Overview Product Number Description Datasheet RXZ01.1 Bus terminator 52.3 Ohm for LonWorks bus N3861 Page 3-17 RXZ02.1 Bus terminator 105 Ohm for LonWorks bus N3861 3-17 RXZ20.1 Terminal cover for RXB../ RXL2../ RXC2../ RXM2.. N3834 4-53 RXZ30.1 Terminal cover for RXB3.. / RXL3.. / RXC3../ RXM3.. N3840 4-53 RXZ40.1 Terminal cover for RXC4.. and AQX2000 N3842 4-79 RXZ95.
Type Overview Product Number Description UP 222/33 Pushbutton‚ double‚ with status LED‚ aluminum metallic Datasheet Page UP 223/12 Pushbutton‚ triple‚ without status LED‚ titanium white 4-41 UP 223/13 Pushbutton‚ triple‚ with status LED‚ titanium white 4-41 UP 223/15 Pushbutton‚ triple‚ with status LED‚ with scene controller‚ with IR receiver decoder‚ titanium white 4-42 4-41 UP 223/32 Pushbutton‚ triple‚ without status LED‚ aluminum metallic 4-41 UP 223/33 Pushbutton‚ triple‚ with statu
System functions Systemfunktionen 1 Desigo – the innovative system for highest efficiency and safety in the building 1-2 Desigo system topology 1-3 System functions for building automation 1-4 Trend and history function 1-5 Event management 1-6 Schedulers/calendar 1-7 Access rights 1-8 Monitoring functions Communication – network 1-9 1-10
1 System functions Desigo – the innovative system for highest efficiency and safety in the building DesigoTM is a modern building management system for a full breadth of application support ensuring that facilities remain comfortable, productive, and achieve optimal energy and equipment performance. On top Desigo offers full integration of fire safety, and security systems.
System functions Desigo system topology The Desigo system can be subdivided into two levels: • • Management level Automation level The automation level forms the interface to the field level and includes room automation as well. By virtue of distributed intelligence, each of these levels operates both autonomously and in a network.
1 System functions System functions for building automation Facility managers and room users of the Desigo system have a versatile range of tools at their disposal, offering convenient access to the system and the plant. Operation and monitoring Operator station • The Desigo management platform is designed to provide a single, easy-to-use point of access to the entire installation used in your facility.
System functions Trend and history function Fully integrated trend data processing allows effortless evaluation and analysis of real-time (online) data and (offline) historical data. The trend feature facilitates the monitoring and fine-tuning of the plant. In the Desigo system, this feature is implemented in the form of Trendlog and TrendlogMultiple objects, in compliance with the BACnet standard.
1 System functions Event management One of the most important functions of a system is automatic alarming in the event of faults in building services plants. The management of events and alarms (generation, display and handling) must be simple, efficient and consistent at all levels of the system.
System functions Schedulers/calendar One of the basic functions of a system is time control of procedures and processes and ensuring energy-efficient operation. Scheduler programs ensure that the heating and lighting are switched off automatically at the end of the workday, that the temperature in the building is reduced at night, and that the plant is not kept running for longer than necessary. They can also be used to switch off the air conditioning in certain rooms during holidays.
1 System functions Access rights Access rights can be used to filter information from the plant and system based on the individual requirements of a user. The caretaker or service engineer, for example, only has access to information important to him. A distinction can also be made between read access and write access. Freely-definable access rights Only authorized personnel are granted access to the system via the operator units.
System functions Monitoring functions Increasing building efficiency/saving energy Thanks to sophisticated monitoring functions, Desigo provides comprehensive indication of the efficiency status in the building. The RoomOptiControl function of Desigo TRA automatically detects unnecessary energy consumption in the room. This is indicated to the room user via a change of color of the Green Leaf symbol from green to red on the QMX3 room operator unit.
1 System functions Communication – network Communication standards specially developed for building systems Compliant devices can be interconnected at low cost using the BACnet (Building Automation and Control network) open communication protocol. The worldwide BACnet standard was developed specifically for the needs of building services. Desigo CC is an open management platform built on a proven SCADA technology and supports a variety of open system protocols and IT standards.
System functions Communication – network MODBUS IP Desigo CC support the MODBUS communication protocol, allowing for example a seamless integration of power meters at the management level. DALI, EnOcean DALI, EnOcean, and KNX devices turn the PXC3 room automation stations of Desigo TRA into a complete solution for the room. The optional DALI bus of the room automation stations allow for simple integration of different lamps and luminaires.
1 Notes 1-12 Siemens Switzerland Ltd Building Technologies Division http://www.siemens.
Management functions 2 Management functions Desigo CC 2-2 Desigo Insight 2-11 Information management 2-14
Management functions Desigo CC Key Features Desigo CC sets new management platform standards 2 Desigo CC™ (Control Centre) is the latest Siemens high-performance management platform, based on 30 years of world-wide experience. Desigo CC software uses state-of-the-art technologies offering powerful, patented functionalities and capabilities for efficient management of your facility.
Management functions Desigo CC Key Features Easy to Learn, Easy to Use • Consistent interface designed around user-based workflows • Simple navigation through tree views or graphics • Auto-defined Related Items help anticipate your next step • Drag-and-drop graphics creation • On-line engineering to speed-up project commissioning time and to reduce system downtime 2 Smart Application for Better Decision Making • Integrated data from multiple building and information systems • Assisted Treatment and Invest
Management functions Desigo CC System Manager 2 The System Manager is used for system navigation, to view and override current conditions, analyze historical operation, and to configure the system. Navigation The System Manager is built around the concept of a common workflow for all system navigation.
Management functions Desigo CC System Manager Printing Printing functionality is offered for printing of reports including graphics and trends. Journaling printing is also available for alarms and events. Schedules The Scheduling application allows complete configuration and monitoring of standard BACnet schedule, calendar, and command objects, as well as for workstation-based schedules that can be used to support systems without built-in scheduling capabilities.
Management functions Desigo CC Event Management Desigo CC provides a robust set of applications to ensure quick, easy, and accurate response to any event. 2 User Interface: Event List Client Profiles To ensure the correct level of event management support for users in any situation, a workstation and/or users can be easily assigned predefined profiles supporting casual, intermediate, or dedicated event notification and management. Summary Bar The Summary Bar is the anchor of Desigo CC event management.
Management functions Desigo CC Open Integration Platform System Openness 2 Desigo CC is an open system by design and supports a variety of open system protocols and IT standards. • • • • • • • • • • • • • • BACnet BACnet Revision 1.13, certified by BACnet Testing Laboratory as BACnet Advanced Workstation Software (BTL B-AWS) OPC Client Data Access specification DA 2.0 OPC Server Data Access specification DA 2.05/3.00; Unified Architecture specification UA 1.
Management functions Desigo CC Management Platform Application Variants 2 Management Platform for Building Automation As a building automation management platform, Desigo CC provides a full breadth of application support for ensuring that facilities remain comfortable, productive, and achieve optimal energy and equipment performance.
Management functions Desigo CC System Architecture / Server Options Desigo CC is a flexible full client-server architecture for building automation and fire safety applications allowing configurations from small single-seat to large multiuser installations. Desigo CC can be installed completely on one computer, with full server and client functionality. Additional Installed, Web, and Windows App (ClickOnce) Clients can also be added.
Management functions Desigo CC Client Options 2 Desigo CC supports multiple client options for applications ranging from casual users to dedicated mission-critical console installations. All client options are built around the same usability standards and capabilities making it easy to switch between different client options without needing to learn multiple interfaces.
Management functions Desigo Insight The clearly structured, modular and object-oriented software of the Desigo Insight management station is optimized to the current operating systems including Windows 7 and Windows 8.1 (business versions) or Windows Server 2012 featuring 64-bit technology. The functional scope and ease of use of the software reduces operating costs and familiarization time while maintaining operational reliability.
Management functions Desigo Insight Task bar 2 A task bar appears after starting Desigo Insight. It provides fast and direct access to all the user applications and displays important status information. In the case of several remote plants, it is possible to switch from one plant to another via the task bar, subject to the appropriate access rights. This ensures clear demarcation lines between the various levels of responsibility.
Management functions Desigo Insight Desigo Terminal Server Desigo Terminal Server provides all the functions of the management system in the form of terminal services over the network. These services can be accessed simultaneously by different users in independent sessions. In addition to the operation and monitoring programs for day-to-day operation of the plant, engineering tools are also provided, allowing modification and extension of the system while it is running.
Management functions Information Management Energy reports 2 Energy Reports can easily check a building for energy efficiency based on predefined reports. The data evaluation and reporting program guarantees gap-free processing and presentation of all operational data. The high availability and optimum use of building services plants are very important. In pursuit of this goal, Energy Reports represents a basic requirement.
Automation Controls 3 Overview and selection tool System topology 3-2 Overview 3-3 Compact series PXC.. 3-7 Modular series PXC..D 3-10 PX System Controller 3-12 Desigo PX Open 3-14 Desigo NET 3-17 Integral migration PXC-NRU.. 3-18 Operator units Operation and monitoring: PXM.. / PXG3.W100 3-19 Desigo TX-I/O I/O Module TXM..
Automation functions Overview and selection tools Overview of product details Desigo™ Overall topology 3 One of the key benefits of Desigo™ is its seamless expansion capability, starting from the smallest system up to comprehensive and distributed large systems. Freely programmable automation stations Desigo PX offers maximum flexibility with freely programmable automation stations for primary plants. This way, building services plants can be optimally controlled and monitored.
Automation functions Overview and selection tools Overview of product details Overview of modular PX automation stations and PX system controllers PX Automation station series modular compact PXC50/100/200..D PXC12/22/36..D Alarms Time schedules Trend Programming with D-MAP Inputs / Outputs Subsystem via Island bus Subsystem Operating / Web Web Interface Touch Panel PXM50 Touch Panel PXM40 PXM20 PXM10 QAX3x PX System controllers PXC00..D PXC001..
Automation functions Overview and selection tools Overview of product details Overview TX-I/O™ module range TXM1.. 3 Type Number of I/Os Functionality Local operation LC-Display 3-colored I/O status LED Green colored I/O status LED Digital inputs (DI) Message signal (open/closer) Message impulse Counter 10 Hz (with debouncing) Counter 25 Hz (Bouncer free) TXM1.8D TXM1.16D TXM1.8U TXM1.8U-ML TXM1.8X TXM1.8X-ML TXM1.6R TXM1.6R-M TXM1.8P TXM1.6RL TXM1.
Automation functions Overview and selection tools Overview of product details Desigo Touch and Web Desigo Touch and Web permits convenient operation and monitoring of complex building-technical plants via touch panels as well as standard Web browsers (HTML5-technology) on various hardware platforms (e.g. tablets, notebooks/PCs, smartphones). The Web interface PXG3.W100 serves as a central access point for the operation of the automation level.
Notes 3 3-6 Siemens Switzerland Ltd Building Technologies Division http://www.siemens.
Automation controls Automation stations Compact series PXC.. Automation station‚ compact series PXC..D Compact‚ freely programmable automation stations for HVAC and building services plant. The fixed data point mix makes the automation stations ideal for commonly used applications with standard signals. V Direct connection of field devices V Management functions (alarm management‚ scheduler programs‚ trend functions‚ remote management‚ access protection‚ etc.
Automation controls Automation stations Compact series PXC.. PXC22.D Automation station with 22 data points and BACnet on LonTalk Fixed data point mix for 22 physical data points per automation station. 3 Data sheet N9215 Operating voltage Frequency Power consumption Communication AC 24 V 50/60 Hz 26 VA Bus: BACnet on LonTalk Room unit: PPS2 16 6 272 x 150 x 62 mm Universal inputs/outputs‚ number Digital outputs‚ number Dimensions (W x H x D) PXC22-E.D Stock No. Product No. BPZ:PXC22.D PXC22.
Automation controls Automation stations Compact series PXC.. Automation station with 36 data points and BACnet on IP PXC36-E.D Fixed data point mix for 36 physical data points per automation station. Data sheet N9215 Operating voltage Frequency Power consumption Communication AC 24 V 50/60 Hz 35 VA Bus: BACnet / IP Room unit: PPS2 24 4 8 293 x 176 x 77 mm Universal inputs/outputs‚ number Digital inputs‚ number Digital outputs‚ number Dimensions (W x H x D) 3 Stock No. Product No. BPZ:PXC36-E.
Automation controls Automation stations Modular series PXC..D PXC50..D/PXC100..D/ PXC200..D 3 Automation stations‚ modular series PXC..D The freely programmable modular series PXC..D automation stations with its free I/O configuration and DIN compliant construction are optimized for panel assembly. It primarily controls and monitors larger items of plant.
Automation controls Automation stations Modular series PXC..D Option modules with web functions (PX Web) for modular automation stations PXC..-E.D PXA40-W.. Option modules for modular automation stations PXC..-E.D. Data sheet N9222 3 Range overview PXA40-W.. Product Title Stock No. Product No.
Automation controls Automation stations PX System controller PXC001..
Automation controls Automation stations PX System controller Option modules PXA40-W.. Product Title Data sheet Stock No. Product No. Option modules with web functions (PX Web) for modular automation stations PXC..-E.D N9222 BPZ:PXA40-W.. PXA40-W.. 3 3-13 Siemens Switzerland Ltd Building Technologies Division Some products are not available in every country www.siemens.
Automation controls Automation stations Desigo™ PX Open PX KNX PX KNX system controller Integration of room controllers from the Desigo RXB and Desigo RXL product range and from KNX thirdparty systems into the Desigo building automation and control system (interface functionality). Further functions: Grouping of rooms and performance of higher level system functions. V BTL tested BACnet communication on LonTalk or IP acoording to BACnet standard (rev 1.12 - as of Desigo V6.
Automation controls Automation stations Desigo™ PX Open Hardware for M-bus Product Title Communication Data sheet Stock No. Product No. System controller for the integration of KNX‚ M-Bus‚ Modbus or SCL over BACnet/LonTalk Bus: BACnet / LonTalk N9223 S55372-C113 PXC001.D System controller for the integration of KNX‚ M-Bus‚ Modbus or SCL over BACnet/IP Bus: BACnet / IP N9223 S55372-C114 PXC001-E.
Automation controls Automation stations Desigo™ PX Open Hardware for PX Modbus 3 Product Title Communication Data sheet Stock No. Product No. System controller for the integration of KNX‚ M-Bus‚ Modbus or SCL over BACnet/LonTalk Bus: BACnet / LonTalk N9223 S55372-C113 PXC001.D System controller for the integration of KNX‚ M-Bus‚ Modbus or SCL over BACnet/IP Bus: BACnet / IP N9223 S55372-C114 PXC001-E.
Automation controls Automation stations Desigo™ NET BACnet router PXG3.. The PXG3.. BACnet router connects a BACnet Ethernet/IP network (BACnet/IPv4 and BACnet/IPv6) to a BACnet /LonTalk network (PXG3.L only)‚ and/or a BACnet/MS/TP channel. BACnet objects are simultaneously transmitted among any and all networks. V Routing between BACnet MS/TP‚ BACnet/LonTalk (PXG3.
Automation controls Automation stations Integral migration PXC-NRU.. PXC-NRUF Automation station for Integral migration‚ intgrates 64 data points in Desigo In existing Integral plants‚ you can replace compact automation units NRUE/A‚ NRUF/A and NRUT/A with the PXC NRUF automation station. Fixed data point mix for 64 physical data points per automation station UI=16‚ DI=24‚ DO=16‚ UO=8. V BTL tested BACnet communication on LonTalk or PTP acoording to BACnet standard (rev 1.12 - as of Desigo V6.
Automation controls Operator units Operation and monitoring: PXM.. 15.6-inch touch panel PMX50 The Desigo PXM50 touch panel of Desigo Touch and Web is designed for control panel mounting. It is used together with the web interface PXG3.W100 and adapts the standard technology used for the web interface for local operation of the technical installations in the building. The touch panel allows for intuitive and efficient operation of multiple Desigo PXC..
Automation controls Operator units Operation and monitoring: PXM.. PXM40 10.1-inch touch panel The Desigo PXM40 touch panel of Desigo Touch and Web is designed for control panel mounting. It is used together with the web interface PXG3.W100 and adapts the standard technology used for the web interface for local operation of the technical installations in the building. The touch panel allows for intuitive and efficient operation of multiple Desigo PXC..
Automation controls Operator units Operation and monitoring: PXG3.W100 Web interface BACnet/IP for Desigo Touchpanels PXG3.W100 The PXG3.W100 web interface serves as the central access point to operate the automation level. A central access point also allows for concurrent operation of different operator units while supporting connection of the Desigo touch panels PXM40 / PXM50 as well as providing access using devices featuring a standard web browser (HTML5 technology) on varios hardware platforms. (e.g.
Automation controls Operator units Operation and monitoring: PXM.. PXM20 Operator unit with BACnet on LonTalk The network-capable PXM20 operator unit allows for homogenous operation of a multitude of building services plants at the automation level. The operator unit offers an operating keyboard and a high-resolution display for graphics and text. The PXM20 can be used on-site or remote for all plants connected via a network.
Automation controls Operator units Operation and monitoring: PXM.. Operator unit‚ local PXM10 The PXM10 operator unit allows for operating and monitoring a Desigo PX automation station. The unit offers user-friendly single-button operation via a turn/press button and a high-quality display. The operator unit can be integrated in a panel or a modular automation station of the PXC..-U series.
Automation controls Desigo TX-I/O I/O modules TXM.. TXM1..
Automation controls Desigo TX-I/O I/O modules TXM.. 6 Relay output module‚ bistable TXM1.6RL 6 outputs signaled with green LED‚ without local operation. 6 DO (volt-free‚ bistable)‚ individually configurable as: - Switching of fluorescent lamps (number of ballasts see data sheet) - Configurable behavior in case of power failure and bus failure - Max. inrush current 800 A (20 µs)‚ 165 A (20 ms) - Switching voltage AC 24...277 V - Switching current max. 10 A (cos j = 0.
Automation controls Desigo TX-I/O I/O modules TXM.. TXM1.6R-M 6 Relay output module with Override 6 outputs‚ signaling per output with three-colored LED (greed‚ yellow‚ red)‚ with local operation as per ISO 16484. 6 DO (relay switch)‚ individually configurable as: - Continuous or impulse contact - Single-stage or multi-stage - Three-point positioning output with internal stroke model - Switching voltage AC 12...250 V / DC 12…30 V - Switching current max.
Automation controls Desigo TX-I/O I/O modules TXM.. 8 Triac output module TXM1.8T 8 Triac outputs‚ signaled with green LED. 8 AO‚ configurable for: - Permanent contact - Three-point positioning output with internal stroke model - Pulsewidth-modulated output (PWM) - Switching voltage AC 24 V - Switching current AO 3-position: 250 mA / 6 VA per output - Switching current AO PWM‚ BO: 125 mA / 3 VA per output Data sheet N8179 Operating voltage Power consumption Dimensions (W x H x D) Weight DC 22.5...
Automation controls Desigo TX-I/O I/O modules TXM.. TXM1.8X 8 Universal I/O Module‚ 4-20mA‚ 8 Inputs/outputs signaled with green LED‚ without local operation (same functionality as TXM1.8U‚ but with current input/output). 8 universal I/O points‚ individually configurable as: - DI: Message signal‚ message impulse (with storage function) or counter impulse (25 Hz) - AI: Temperature sensor‚ DC 0...10 V‚ or 4...20 mA - AO: DC 0...10 V‚ 4...20 mA (for 4 I/O points) 3 TXM1.
Automation controls Desigo TX-I/O Desigo TX Open TX Open RS232/485 module for integrating third-party systems and devices to Desigo TXI1.OPEN RS232/485 module as platform to integrate third-party systems and devices to the Desigo building automation and control system via modular automation stations PXC..D (Version 4 or higher).
Automation controls Desigo TX-I/O Accessories Desigo TX-I/O TXA1.IBE Island bus expansion module for decentralized sub-islands with TX-I/O-modules V V V V - 3 TXS1.
Automation controls Desigo TX-I/O Accessories Desigo TX-I/O P-bus interface module TXB1.PBUS V Interface between the automation station PXC64-U/PXC128-U and the bus of the TX-I/O modules V Integrated DC 24 V‚ 1.2 A to supply power to TX-I/O modules and field devices V USB port for tool connection Data sheet N8180 Dimensions (W x H x D) Weight 128 x 77.5 x 98 mm 0.28 kg 3 Stock No. Product No. BPZ:TXB1.PBUS TXB1.PBUS Set of address plugs Product Title Data sheet Stock No. Product No.
Room automation 4 Overview and selection tool Desigo Total Room Automation (TRA) Desigo RX Room operator units Service unit Product range overview 4-2 Configurable Room Automation Station with BACnet 4-3 Programmable Room Automation Station with BACnet 4-14 Room Automation with KNX 4-17 Room Automation with LON 4-20 Room units for RXB and RXC 4-22 Compact room automation stations BACnet/IP DXR2.E.. 4-23 Compact room automation stations BACnet/MSTP DXR2.M..
Room automation Overview and selection tools Product range overview Comfort of building occupants and low running costs are often contradicting requirements. Room automation in Desigo system, where energy demand and production are tightly connected, can satisfy both. Siemens offers products for scalable room automation solutions, from simple HVAC applications up to room automation with HVAC, lighting and shading, all seamlessly combined in one solution.
Room automation Overview and selection tools Configurable Room Automation Station with BACnet Configurable Room Automation Station with BACnet The room automation stations DXR2.. are perfectly suited to automate heating, ventilation, and air conditioning in a room. 4 In addition, the DXR2.. can be extended with lighting and shading functionality by adding KNX PL- Link modules.
Room automation Overview and selection tools Configurable Room Automation Station with BACnet Application configuration Applications can be configured by combining functions from one or several application types: • Room sensor and operating • Radiant (heated/chilled) ceiling and Radiator • Fan coil • VAV system or Fan powered box • Radiant (heated/chilled) ceiling and Radiator • Lighting • Shading Configuration is limited by total number of data points.
Room automation Overview and selection tools Configurable Room Automation Station with BACnet Example of product selection 1. Check application requirements Requirements • Fan coil • 4-pipe system • 3-speed fan • 2 valves with electrothermal actuators (2-point control signal ) • Voltage AC 230 V • Presence detector • Room unit with built-in temperature sensor 4 Frost protection (FrPrtMon) Outside air damper (DmpOa) Extract air Mixed air temperature temperature (TEx) (TMx) DI AI Relais Triac 0..
Room automation Overview and selection tools Configurable Room Automation Station with BACnet HVAC applications Application types 4 Fan coil Application can be configured from these functions: • Outside Air Damper • Single Speed Fan, Multi Speed Fan or Variable Speed Fan • Chilled water cooling coil • Direct expansion evaporator cooling coil • Heating/Cooling coil • Hot water heating coil • Electric heating coil modulating, single stage or two stage • Room temperature control by two-pipe system with chang
Room automation Overview and selection tools Configurable Room Automation Station with BACnet Fan powered box Application can be configured from these functions: • Supply air control • External flow control for VAV with integrated flow controller and differential pressure sensor • Internal flow controller and differential pressure sensor for damper actuator control • Internal flow controller and velocity sensor for damper actuator control • Single Speed Fan , 2 speed Fan or Variable Speed Fan • Chilled wate
Room automation Overview and selection tools Configurable Room Automation Station with BACnet Room sensor and operating Application can be configured from these functions: • Room operating units QMX3 on KNX PL-Link • Sensors for onboard IO’s or KNX PL-Link • Presence/brightness sensors for onboard IO’s or KNX PL-Link • Push buttons for light and shading on KNX PL-Link • Window contacts for onboard IO’s • Collision detectors for onboard IO’s T 4 DI AI HVAC Sensor (KNX PL-Link) Presence and brightness senso
Room automation Overview and selection tools Configurable Room Automation Station with BACnet Room units Features Mode selection Fan switch Setpoint adjuster Temperature sensor Humidity sensor Air quality sensor Mounting Flush mounted Direct on wall Integration into DXR2… Data points KNX PL-Link bus load (mA) QMX3.. P34 n n n n P36 n n n n P74 n n n n n n 4 n 3 12.5 n n 3 7.5 5 15 1 5 n 1 5 n 2 5 n 3 5 n n n n n n n n n n n 1 15 2 15 2 15 3 15 n 3 15 n QMX3.
Room automation Overview and selection tools Configurable Room Automation Station with BACnet Presence and brightness sensor (KNX PL-link) UP 258D11 4 Features Presence detector Detection area at mounting height 2.5 m (m) Brightness sensor Integration into DXR2.. Data points KNX PL-link bus load (mA) UP 258D12 n n 3 n 4.5 n 2 10 2 10 GDB181.1E/KN GLB181.1E/KN 5 0.8 0…300 24 10 1.
Room automation Overview and selection tools Configurable Room Automation Station with BACnet Push buttons (KNX PL-link) UP 220/31 UP 221.. UP 222.. UP 223.. UP 285.. UP 286 UP 287..
Room automation Overview and selection tools Configurable Room Automation Station with BACnet Actuators for lighting (KNX PL-link) 4 UP 510/03 UP 525/03 UP 510/13 Applications Switching n n n Dimming (R, L, C) n Outputs Number of outputs 2 1 2 Switching current (A) 10* 10* Rated power (VA) 10…250 Inputs Mounting Flush mount n n (under push buttons) Flush mount n Room control box (AP 118/01) Room control box (AP 641/01) Integration into DXR2..
Room automation Overview and selection tools Configurable Room Automation Station with BACnet Central functions Application can be configured from these functions: • Central operation group including room operating mode and start optimization, setpoints and seasonal compensation, light, shading and forced emergency commands • Demand controlled hot water supply system, includes temperature setpoint • Demand controlled chilled water supply system, includes temperature setpoint, shift to avoid condensation by
Room automation Overview and selection tools Programmable Room Automation Station with BACnet Programmable Room Automation Station with BACnet 4 DXR2.. and PXC3.. room automation stations are programmable, based on proven application blocks. Solutions thus can be tailored to specific needs and allow to achieve maximum efficiency and comfort. A comprehensive block library for room automation is provided as part the scope of delivery.
Room automation Overview and selection tools Programmable Room Automation Station with BACnet Modular room automation station with BACnet Max. numbers of rooms / room segments System communication System functions (BACnet) BACnet profiles Programming Peripheral bus Bus for I/O module KNX PL-Link1) / KNX S-Mode DALI Maximum configuration Inputs/Outputs for TX I/O modules Devices on KNX PL-Link DALI ballasts Total data points Integrated power supply for KNX (mA) PXC3.E72 4/8 BACnet / IP PXC3.
Room automation Overview and selection tools Programmable Room Automation Station with BACnet Compact room automation station with BACnet 4 Communication BACnet/IP DXR2.E09-101A BACnet MS/TP DXR2.
Room automation Overview and selection tools Room Automation with KNX Room Automation with KNX Topology 4 RDF301 RDF301.50 RDF301.
Room automation Overview and selection tools Room Automation with KNX Compact Room Controller RXB with KNX RXB applications RXB hardware The product range comprises compact controllers and corresponding room units for comfortable control. The compact room controllers are optimized to the respective application with regard to input/output configuration. HVAC functions are operated via standard room units. Communication is based on KNX S-mode. The fan coil room controllers communicate also in KNX LTE mode.
Room automation Overview and selection tools Room Automation with KNX Fields of application The scope of RXB is defined by the preprogrammed application software. The following pages provide an overview of the options and the corresponding devices, divided into different areas of application. The devices are supplied preprogrammed with the applications. The required application can be selected by means of the ETS, Synco™ tool or the Handy tool QAX34.3.
Room automation Overview and selection tools Room Automation with LON Room Automation with LON RXC applications RXC hardware RXC is a comprehensive range of room controllers for HVAC automation, extension modules for lighting and blinds, and a graded range of purposedesigned room units. LONWORKS technology is used for data communications. The range consists of compact and modular room controllers, user-friendly room operator units and controllers in room-style housings.
Room automation Overview and selection tools Room Automation with LON Fields of application The scope of RXC is defined by the pre-programmed application software. The following pages provide an overview of the options and the corresponding devices, divided into different areas of application. The devices are supplied pre-programmed with the application required. Other applications can be loaded using the RXT10.5 commissioning and service tool, which contains the entire applications library.
Room automation Overview and selection tools Room units for RXB and RXC Room units LonWorks/PPS2 QAX.. Features 4 Display Mode selection Fan switch Setpoint adjuster Operation of light/blindes Temperature sensor Mounting Flush-mounted Directly on wall Control panel(door) Communication PPS2 LonWorks Product range Desigo RX RXB.. RXC.. 30.1 31.1 32.1 33.1 34.3 39.1 n n n n n n n n n n n n n n n n n n n n n n 84.
Room automation Desigo TRA Compact room automation stations BACnet/IP DXR2.E.. Compact room automation station‚ BACnet/IP‚ 230 V‚ flat housing‚ 1 DI‚ 2 UI‚ 3 relay‚ 3 AO DXR2.
Room automation Desigo TRA Compact room automation stations BACnet/IP DXR2.E.. DXR2.
Room automation Desigo TRA Compact room automation stations BACnet/IP DXR2.E.. Compact room automation station‚ BACnet/IP‚ 230 V‚ flat housing‚ 1 DI‚ 2 UI‚ 3 relay‚ 4 triac DXR2.
Room automation Desigo TRA Compact room automation stations BACnet/IP DXR2.E.. DXR2.
Room automation Desigo TRA Compact room automation stations BACnet/IP DXR2.E.. Compact room automation station‚ BACnet/IP‚ 24 V‚ DIN housing‚ 2 DI‚ 4 UI‚ 4 AO‚ 8 triac DXR2.E18..
Room automation Desigo TRA Compact room automation stations BACnet/MSTP DXR2.M.. DXR2.
Room automation Desigo TRA Compact room automation stations BACnet/MSTP DXR2.M.. Compact room automation station‚ BACnet/MSTP‚ 230 V‚ flat housing‚ 1 DI‚ 2 UI‚ 3 relay‚ 4 triac DXR2.
Room automation Desigo TRA Compact room automation stations BACnet/MSTP DXR2.M.. DXR2.
Room automation Desigo TRA Compact room automation stations BACnet/MSTP DXR2.M.. Compact room automation station‚ BACnet/MSTP‚ 24 V‚ DIN housing‚ 2 DI‚ 4 UI‚ 4 AO‚ 8 triac DXR2.M18..
Room automation Desigo TRA Modular room automation stations PXC3.. PXC3.E.. Room automation stations Modular‚ freely programmable room automation station for HVAC‚ lighting and shading (TRA‚ Total Room Automation): V BTL tested BACnet/IP communication acoording to BACnet standard (rev 1.13) include B-ASC profile V Island bus to connect TX-I/O modules with any data point mix (including bus supply) (not with PXC3.
Room automation Desigo TRA Modular room automation stations PXC3.. Range overview PXC3.E.. for Desigo V6 Product Title Communication Data sheet Stock No. Product No. Room automation station BAC- BACnet / IP net / IP and DALI DALI N9203 S55376-C118 PXC3.E16A-100A Room automation station BAC- BACnet / IP KNX PL-Link / S-Mode net / IP‚ for up to 4 rooms / 8 Island bus room segments N9203 S55376-C130 PXC3.
Room automation Desigo TRA Room unit with KNX PL-Link QMX3.. Room sensor and unit for KNX PL-Link‚ freely configurable‚ flush-mounted The flush-mounted room unit QMX3.. consists of: - Operator unit - Bezel‚ titanium white - Base plate and KNX plug. Functionality: V Freely configurable user interface (keys and visual items) as part of Total Room Automation V RoomOptiControl energy efficiency function V Room temperature measurement V Display of room temperature‚ control mode‚ scenes etc.
Room automation Desigo TRA Room unit with KNX PL-Link Base modules with KNX for CO2 measurement Data sheet N1411 Voltage supply Communication KNX bus KNX S-mode KNX LTE-mode KNX PL-Link Passive temperature sensor NTC 10k 1 Potential-free contacts 2 CO2: 0...5000 ppm Bus connection: spring terminal sensor inputs: 4 screw terminals Analog inputs Analog inputs‚ number Digital inputs Digital inputs‚ number Measuring range Connection‚ electrical AQR2576.. 4 Range overview AQR2576..
Room automation Desigo TRA Room unit with KNX PL-Link QMX3.. Wall-mounted room sensors and operator units for KNX The wall-mounted room unit QMX3.. consists of: - Base plate - Sensor or room operator unit The following functions are (depending on type): V Temperature sensor or multisensor (T‚ r.h.
Room automation Desigo TRA Room unit with KNX PL-Link Room operator unit KNX with temperature sensor‚ segmented backlit display‚ touchkeys QMX3.P34 Functions: V Temperature sensor V Segmented backlit display and touchkeys V "Green Leaf" LED Stock No. Product No. S55624-H105 QMX3.P34 Room operator unit KNX with sensors for temperature‚ humidity‚ CO2‚ segmented backlit display‚ touchkeys 4 QMX3.
Room automation Desigo TRA Room unit with KNX PL-Link QMX3.P37 Room operator unit KNX with temperature sensor‚ segmented backlit display‚ configurable touchkeys‚ LED display Functions: V Temperature sensor V Segmented backlit display and touchkeys V Configurable touchkeys with LED display V Switching and control of lighting‚ blinds‚ scenes V Window for labels V "Green Leaf" LED 4 Stock No. Product No. S55624-H108 QMX3.
Room automation Desigo TRA Touch room operator unit with Ethernet / IP Touch room operator unit 4.3 inch QMX7.E38 V High quality‚ TFT display 4.3" with 262‚000 colors and glass surface in aluminum metal housing for use with Desigo TRA. V Resolution: 480 x 800 pixels (wide screen). V IPS technology for wider viewing angle‚ more brilliant colors and higher contrast. V Capacitive touch screen. V Portrait and landscape application.
Room automation Desigo TRA Pushbutton interface UP 220/31 with KNX PL-Link UP 220D31 Pushbutton interface‚ 4 x potential-free contact‚ output for LED control V With 4 inputs / outputs each configurable for potential-free contacts or for control of an LED (max 2 mA) V With integrated bus coupling unit‚ bus connection via bus terminal V 8-wire plug-in cable set‚ 280 mm long‚ extendable to a max.
Room automation Desigo TRA Pushbutton with KNX PL-Link UP 22.. Pushbutton‚ i-system V V V V Pushbutton in pair Horizontal operation Per pushbutton selectable function Connectable bus coupling unit (BTM) or flush-mounted actuators via BTI Design Dimensions (W x H x D) 55 x 55 x 11 mm Bus coupling unit (BTM) / flush mounted actuator and a design frame must be ordered as a separate items. 4 Range overview UP 22.. Product Title Stock No. Product No.
Room automation Desigo TRA Pushbutton with KNX PL-Link Pushbutton with scene controller and IR receiver decoder‚ i-system UP 223/..5 V V V V V Pushbutton in 3 pairs Horizontal operation Per pushbutton selectable function Connectable bus coupling unit (BTM) or flush-mounted actuators via BTI IR receiver for IR handheld transmitter S 425/72 or AP 42../13 Design Dimensions (W x H x D) 55 x 55 x 11 mm Bus coupling unit (BTM) / flush mounted actuator and a design frame must be ordered as a separate items.
Room automation Desigo TRA Pushbutton with KNX PL-Link Pushbutton‚ DELTA style V V V V UP 28.. Pushbutton in pair Vertical operation Per pushbutton selectable function Connectable bus coupling unit (BTM) or flush-mounted actuators via BTI Dimensions (W x H x D) 68 x 68 x 14 mm Bus coupling unit (BTM) / flush mounted actuator and a design frame must be ordered as a separate items. Range overview UP 28.. Product Title Stock No. Product No.
Room automation Desigo TRA Pushbutton with KNX PL-Link UP 287/..5 Pushbutton with scene controller and IR receiver decoder‚ DELTA style V V V V V Pushbutton in 4 pairs Vertical operation Per pushbutton selectable function IR receiver for IR handheld transmitter S 425/72 or AP 42../13 Connectable bus coupling unit (BTM) or flush-mounted actuators via BTI Design Dimensions (W x H x D) 4 68 x 68 x 14 mm Range overview UP 287/..5 Display Color Communication Stock No. Product No.
Room automation Desigo TRA Accessories for pushbutton with KNX PL-Link Bus transceiver modules‚ Mounting depth 18 mm UP 117/12 V For connection of a modular bus device to the bus line V 10-pole BTI socket (BTI - Bus Transceiver Interface) for plugging of bus terminal devices with BTI connector V For installation in flush-mounting switch and socket boxes with Ø 60 mm in diameter 40 mm deep V Screw fixing V Bus connection via bus terminal Communication Dimensions (W x H x D) KNX S-Mode KNX PL-Link 71 x 71
Room automation Desigo TRA Accessories for pushbutton with KNX PL-Link AP 42../13 IR wall switch‚ titanium white V For wireless control of actuators via infrared signals‚ e.g. for switching On/Off/Over‚ dimming‚ value transmission‚ shutter/blind control or call up/store scenes V 1 LED for control of transmission and battery V Red LED cover V DIP switches for selection of the channel number (1...
Room automation Desigo TRA I/O modules TXM.. TX-I/O™ modules TXM1..
Room automation Desigo TRA I/O modules TXM.. TXM1.8D 8 Digital Input Module 8 digital input‚ signaling per input with three-colored LED (green‚ yellow‚ red)‚ without local operation. 8 DI‚ individually configurable as: - Message signal - Message impulse with storage functions - Counter impulse for up to a maximum of 10 Hertz 4 TXM1.8RB Data sheet N8172 Operating voltage Power consumption Dimensions (W x H x D) Weight DC 22.5...26 V 1.1 W 64 x 77.5 x 98 mm 0.164 kg Stock No. Product No. BPZ:TXM1.
Room automation Desigo TRA I/O modules TXM.. 16 Digital Input Module TXM1.16D 16 digital input‚ signaling per input with green LED‚ without local operation. 16 DI‚ individually configurable as: - Message signal - Message impulse with storage functions - 8 inputs as counter impulse for up to a maximum of 10 Hertz Data sheet N8172 Operating voltage Power consumption Dimensions (W x H x D) Weight DC 22.5...26 V 1.4 W 64 x 77.5 x 98 mm 0.199 kg 4 Stock No. Product No. BPZ:TXM1.16D TXM1.
Room automation Desigo TRA Accessories Desigo TX-I/O TXA1.IBE Island bus expansion module for decentralized sub-islands with TX-I/O-modules V V V V - 4 TXS1.
Room automation Desigo TRA Accessories Desigo TX-I/O Set of address plugs Product Title Data sheet Stock No. Product No. Address Keys 1-12 + reset key N8170 BPZ:TXA1.K12 TXA1.K12 Address Keys 1-24 + 2 reset keys N8170 BPZ:TXA1.K24 TXA1.K24 Address keys 25-48 + 2 reset keys N8170 BPZ:TXA1.K-48 TXA1.K-48 Address keys 49-72 + 2 reset keys N8170 BPZ:TXA1.K-72 TXA1.K-72 Address keys 73-96 + 2 reset keys N8170 S55661-J101 TXA1.
Room automation Desigo TRA Fan coil I/O block with KNX PL-Link RXM21.1 I/O block with KNX PL-Link block for use with a PXC3.E7.. series room automation station The I/O block with KNX PL-Link‚ RXM21.1 contains the inputs and outputs required by a PXC3 series room automation station for a Fancoil application.
Room automation Desigo TRA Fan coil I/O block with KNX PL-Link I/O block with KNX PL-Link for use with a PXC3.E7.. series room automation station RXM39.1 The I/O block with KNX PL-Link‚ RXM39.1 contains the inputs and outputs required by a PXC3 series room automation station for a fan-coil application. V KNX PL-Link bus communication V Fan control (ECM fan‚ DC 0...10 V) V Actuator control DC 0...10 V V Electric heating control DC 0...
Room automation Desigo TRA Room control box with KNX PL-Link RL 260/23 Binary Input‚ 4 inputs for AC/DC 12...230 V V 4 Inputs for AC/DC 12...230 V V Max. cable length‚ unshielded‚ twisted 100 m V Screw-less terminals for connection and through-wiring of untreated single-core‚ stranded or multicore conductors‚ 0.5 ... 2.
Room automation Desigo TRA Room control box with KNX PL-Link Shutter Actuator‚ 2 x AC 230 V‚ 6 A RL 521/23 V 2 channels V For the separate control per actuator channel of a sun protection‚ damper‚ door or window drive with a motor for AC 230 V and electromechanical limit switches V Electrically interlocked relays (for reversing direction of rotation) V Screw-less terminals for connection and through-wiring of untreated single-core‚ stranded or multicore conductors‚ 0.5 ... 2.
Room automation Desigo TRA Room control box with KNX PL-Link UP 510/..3 Binary Output Rated contact voltage 230 V AC 2 floating relay contacts Rated contact current 10 A Screwless terminals for connection and through-wiring of untreated single-core‚ stranded or multicore conductors‚ 0.5...2.
Room automation Desigo TRA Room control box with KNX PL-Link Binary output (relay)‚ 3 x AC 230 V‚ 6 A RL 513/23 3 floating relay contact One relay contact per output as switching element Rated contact operating voltage AC 230 V Rated contact frequency: 50/60 Hz Contact rated current according to DIN EN 60669-1: 6 A Screw-less terminals for connection and through-wiring of untreated single-core‚ stranded or multicore conductors‚ 0.5...2.
Room automation Desigo TRA Room control box with KNX PL-Link RS 525/23 Universal Dimmer‚ 1 x 230 V AC‚ 250 VA‚ (R‚L‚C load) V V V V V V V V V V V V 4 One output for switching and dimming resistive‚ inductive or capacitive loads Automatic adjustment to leading edge or trailing edge control‚ depending on the type of load Rated operational voltage AC 230 V Rated frequency 50...
Room automation Desigo TRA Sensors with KNX PL-Link Presence detector UP 258D Passive infrared detector for ceiling mounting indoors V Optional blinding of parts of the detection area V Mixed light measurement V Power supply over the bus line V Integrated bus coupling unit‚ bus connection via bus terminal V Ceiling mounting on a flush-mounting box with 60 mm diameter and min.
Room automation Desigo TRA Sensors with KNX PL-Link S 255/11 IR remote control accessories V 6 pushbutton pairs for the remote control of lighting‚ shutter/blinds and scenes via UP 258E21 or UP 258D11 presence detector V Range: approx. 4.5 m V Power supply: CR2025 lithium button cell V Degree of protection (acc. to EN 60529): IP40 Dimensions (W x H x D) 40 x 87 x 6 mm 4 AP 258E01 Stock No. Product No.
Room automation Desigo TRA VAV compact controller with KNX PL-Link VAV compact controller KNX G..B181.
Room automation Desigo TRA Accessories for KNX PL-Link N 125/..2 Power supply unit Integrated chokes Bus connection via bus terminal or contact system to data rail Rated operational voltage 120...230 V AC‚ 50...60 Hz‚ 220 V DC Output voltage 29 V DC Additional unchoked output for 29 V DC‚ for powering a second bus line via an external choke (e. g.
Room automation Desigo RX Communicating room thermostats Room thermostat with KNX communications‚ AC 230 V‚ for fan coil units and universal applications RDG100KN - KNX communications - 3 multifunctional inputs for keycard contact‚ external room / return air temperature (QAH11.
Room automation Desigo RX Communicating room thermostats RDG160KN Room thermostat with KNX communications‚ AC 24 V‚ for fan coil units and universal applications‚ heat pump‚ fan (1-/ 3-speed‚ DC)‚ valves (2-point‚ DC) - - 4 KNX communications For applications with DC control outputs and DC or 3-speed fan output For applications with 2-position control output with DC fan output 3 multifunctional inputs for keycard contact‚ external room / return air temperature (QAH11.
Room automation Desigo RX Communicating room thermostats Touch screen room thermostat with KNX communications‚ for 2-/4- pipe fan coil‚ universal applications or compressors in DX-type equipment RDF800KN Touch screen room thermostat for 2-/4-pipe fan coil‚ universal applications or compressors in DX-type equipment - KNX communications - Operating modes: Comfort‚ Economy and Protection - For heating and/or cooling applications - 2 or 3-position control outputs - Output for 1-speed or 3-speed fan - 2 multif
Room automation Desigo RX Communicating room thermostats RDF..
Room automation Desigo RX Communicating room thermostats Room thermostat with KNX communications‚ AC 24 V‚ VAV heating and cooling systems RDG400KN - KNX communications - Output DC 0…10 V for VAV actuator and auxiliary output ON/OFF‚ PWM or 3-position or 3-position for VAV actuator and auxiliary output DC 0...10 V - 2 multifunctional inputs for keycard contact‚ external room / return air temperature (1x‚ QAH11.
Room automation Desigo RX Communicating room thermostats RDU341 Semi Flush-mount room thermostat for rectangular conduit box with KNX communications‚ for VAV application Semi Flush-mount room thermostat for VAV application - KNX communications - Output for a DC 0…10 V actuator and AC 230V electrical heater (ON-OFF) - 2 multifunctional inputs for keycard contact‚ external room / return air temperature (QAH11.
Room automation Desigo RX Communicating controllers - RXB (KNX) Room controller with KNX communication RXB2.. The controllers are used for temperature control in individual rooms. - For 2-pipe with changeover or 4-pipe fan coil systems - For radiator and chilled ceiling (RXB24.
Room automation Desigo RX Communicating controllers - RXB (KNX) RXB39.1/FC-13 Room controller for fan-coil applications with KNX communication The RXB39.1 room controller is used for temperature control in individual rooms. - For 2-pipe and 4-pipe fan coil systems with or without changeover - PI control - KNX bus communication - Connection to Desigo building automation and control system via PX KNX - DC 0...
Room automation Desigo RX Communicating controllers - RXB (KNX) Room units for RXB.. Product Title Data sheet Stock No. Product No. Room unit with sensor and PPS2 interface N1741 BPZ:QAX30.1 QAX30.1 Room unit with sensor‚ setpoint adjuster and PPS2 interface N1741 BPZ:QAX31.1 QAX31.1 Room unit with sensor‚ setpoint and operating mode selector and PPS2 interface N1641 BPZ:QAX32.1 QAX32.
Room automation Desigo RX Communicating controllers - RXB (KNX) Valve actuators for RXB.. Product Title Data sheet Stock No. Product No. Electrothermal actuator‚ AC/DC 24 V‚ NC‚ 2P‚ PDM‚ PR N4884 S55174-A115 STA73PR/00 Electrothermal actuator‚ AC/DC 24 V‚ NO‚ 2P‚ PDM‚ PR N4884 S55174-A116 STP73PR/00 Electromotoric actuator‚ 100 N‚ 2.5/5 mm‚ 1.5 m‚ AC 24 V‚ 3P N4893 BPZ:SSA81 SSA81 Electromotoric actuator‚ 200 N‚ 5.5 mm‚ AC 24 V‚ 1.
Room automation Desigo RX Communicating controllers - RXC (LonWorks) RXC10.5/.. Radiator‚ chilled ceilings and VAV room controllers with LonWorks communication The RXC10.5 controller is used for temperature control in individual rooms.
Room automation Desigo RX Communicating controllers - RXC (LonWorks) RXC20/21/22.. Room controller with LonWorks communication The RXC20..‚ RXC21.. and RXC22.. controllers are used for temperature control in individual rooms.
Room automation Desigo RX Communicating controllers - RXC (LonWorks) Accessories for RXC2.. Product Title Data sheet Stock No. Product No. Terminal cover for RXB../ RXL2../ RXC2../ RXM2.. N3834 BPZ:RXZ20.1 RXZ20.1 Power amplifier for thermal actuators AC 24 V‚ PWM N3591 BPZ:UA1T UA1T Communicating room controller‚ with LonMark compatible bus communication RXC39.5/00039 The RXC39.5 room controller is used for temperature control in individual rooms.
Room automation Desigo RX Communicating controllers - RXC (LonWorks) RXC30.5/.. Radiators‚ chilled ceilings‚ lighting‚ base module with LonWorks communication The controllers are used for temperature and lighting control in individual rooms.
Room automation Desigo RX Communicating controllers - RXC (LonWorks) VAV base module with LonWorks communication RXC31.5/.. The RXC31.5 controller is used for VAV room temperature control in individual rooms.
Room automation Desigo RX Communicating controllers - RXC (LonWorks) RXC32.5/.. VAV room controller with LonWorks communication The RXC32.5 controller is used for VAV room temperature control in individual rooms.
Room automation Desigo RX Communicating controllers - RXC (LonWorks) Extension module for lighting control RXC40.5 - Switching and dimming of 2 groups of lights Data sheet N3842 Voltage supply Digital inputs‚ number Relay output‚ switching voltage Relay output‚ switching current Analog outputs‚ number Interface for base module Mounting location From base module 4 AC 250 V 12 (12) A 2 PE-bus for RXC3..
Room automation Desigo RX Communicating controllers - RXC (LonWorks) Connection to Desigo 4 Product Title Data sheet Stock No. Product No. System controller BACnet/LonTalk N9222 BPZ:PXC00.D PXC00.D System controller BACnet/IP N9222 BPZ:PXC00-E.D PXC00-E.D Automation station BACnet/LonTalk‚ with up to 52 data points N9222 S55372-C109 PXC50.D Automation station BACnet/IP‚ with up to 52 data points N9222 S55372-C110 PXC50-E.
Room automation Desigo RX Communicating controllers - RXC (LonWorks) Temperature sensors for RXC.. Product Title Data sheet Stock No. Product No. Room temperature sensor LG-Ni1000 N1721 BPZ:QAA24 QAA24 Front module with passiv temperature measurement‚ LGNi1000 N1408 S55720-S133 AQR2531ANW Room temperature sensor LG-Ni1000 for mounting on recessed conduit boxes N1722 BPZ:QAA64 QAA64 Duct temperature sensor 400 mm‚ LG-Ni1000 N1761 BPZ:QAM2120.040 QAM2120.
Room automation Desigo RX Communicating controllers - RXC (LonWorks) Damper actuators for RXC.. Product Title Data sheet Stock No. Product No. Rotary air damper actuators 5 Nm‚ without spring return N4634 BPZ:GDB..1E GDB..1E Linear air damper actuators 125 N‚ without spring return N4664 BPZ:GDB..2E GDB..2E Rotary air damper actuators 10 Nm‚ without spring return N4634 BPZ:GLB..1E GLB..1E Linear air damper actuators 250 N‚ without spring return N4664 BPZ:GLB..2E GLB..
Room automation Room operator units For controllers RX.. (PPS2): QAX3.. / QAX8.. Room unit with PPS2 interface QAX3.. Room units for acquiring the room temperature and operation of individual room control. Power consumption Interface for controller Interface for service Sensing element‚ temperature Measuring range‚ temperature Time constant Measurement accuracy Setpoint readjustment range Degree of protection Mounting location Mounting 0.10 VA PPS2 PPS2 on RJ45 NTC 0...40 °C L8 min ±0.25 K at 25 °C ±0.
Room automation Room operator units For controllers RX.. (PPS2): QAX3.. / QAX8.. QAX33.1 Room unit with sensor‚ setpoint and operating mode selector‚ fan speed selection‚ and PPS2 interface - Acquisition of room temperature - Setpoint adjuster for room temperature - Rocker switch for mode selection (Off/Auto) and for manual fan control with fan coil systems (up to 3 speeds) Data sheet N1642 Dimensions (W x H x D) 90 x 100 x 36 mm 4 QAX34.1 Stock No. Product No. BPZ:QAX33.1 QAX33.
Room automation Room operator units For controllers RX.. (PPS2): QAX3.. / QAX8.. Flush-mounted room unit complete with PPS2 interface and design frame QAX84.1/PPS2 The set consists of: - Operator unit‚ - PPS2 bus coupling unit and - Design frame DELTA line in titanium white.
Room automation Room operator units For controllers RX.. and room automation (BACnet) (EnOcean and wireless) QAX95.4 Room unit with EnOcean interface V V V V V Acquisition of the room temperature Powered by solar cell A gateway is mandatory (EnOcean / KNX) Optional use of battery if light conditions are insufficient Including design frame DELTA line‚ titan white For use with units from the following product ranges: - RXB (together with gateway EnOcean/KNX‚ RXZ97.
Room automation Room operator units For controllers RX.. and room automation (BACnet) (EnOcean and wireless) Room unit with EnOcean interface‚ setpoint adjuster‚ button and switch V V V V V V V V QAX97.
Room automation Room operator units For controllers RX..
Room automation Room operator units For controllers RX..
Room automation Room operator units For controllers RX.. and room automation (BACnet) (EnOcean and wireless) RXZ95.1/LON Radio frequency receiver with Gateway EnOcean/LonWorks‚ AC / DC 24 V‚ external antenna V Wireless receiver with LonWorks® interface FTT10A V Evaluation of up to 9 EnOcean room units (room temperature and setpoint adjustment) For use with: - Desigo RXC - Devices / systems with LonWorks® communication An external antenna is included in the delivery.
Room automation Room operator units For communicating controller - RXC (LonWorks) QAX5.. QAX5.. Versatile room units with LonWorks interface Versatile room units with LonWorks bus communication.
Room automation Service unit For controller RXC.. RXT20.1 Service unit with LCD Data sheet N3851 Voltage supply Power consumption Ambient temperature‚ operation Weight PPS2 0.1 VA 0...50 °C 0.13 kg Stock No. Product No. BPZ:RXT20.1 RXT20.1 4 4-92 Siemens Switzerland Ltd Building Technologies Division Some products are not available in every country www.siemens.
Standard Controllers 5 Overview and selection tool Product range overview 5-2 Communicating HVAC controllers - Synco™ 700 Heating controllers RMH.. 5-9 Extension modules for RMH.. 5-11 Boiler sequence controllers RMK.. 5-12 Extension modules and operator units for RMH.. and RMK.. 5-14 Application examples RMH.. / RMK.. 5-16 Field devices for RMH.. and RMK.. 5-21 Universal controllers RMU.. 5-22 Application examples RMU.. 5-24 Switching and monitoring device RMS..
Standard Controllers Overview and selection tools Product range overview One system for all types of applications Synco tool For commissioning and diagnostics PC with ACS software 5 Synco operating – efficient operation of plant with straightforward remote control Thanks to Synco’s Web server, plant operation and monitoring can be effected from a PC or smartphone at any time and from any location.
Standard Controllers Overview and selection tools Product range overview Synco operating Efficient operation of plant including alarm reporting Mobile phone Smartphone PC with Web browser Internet/Intranet Standard Modem gateway The worldʼs only open standard for home and building control – ISO/IEC 14543-3 5 Central control unit and room controller for individual room climate Control and switching unit for heating, ventilation and air conditioning plants Synco RXB/RXL room controllers, Synco RDG/RDF
Standard Controllers Overview and selection tools Product range overview Synco IC Easy and secure remote access and plant overview Synco IC is a web-based Remote Access System. Setting-up Internet access to your plant is easy: just connect your web server OZW with the Internet, create your user account on the web page and enter the key for your web server OZW. www.siemens-syncoic.
Standard Controllers Overview and selection tools Product range overview RMS.. 705 785 787 788 782 783 789 Boiler sequence controller Modular universal controller, 1 control loop Modular universal controller, 2 control loops Modular universal controller, 3 control loops Switching and Monitoring Device Universal module, 8UI Operation KNX communication 7-day time switch and holiday/ special day program Supervision Logic functions Outputs Step switch Relay 3-position DC 0...
Standard Controllers Overview and selection tools Product range overview Overview standard systems Communication KNX (Konnex) Standard systems for: Heating, ventilation or air conditioning Communication central unit OZW771.. OZW772.. Software ACS790 Service Tool OCI700.
Standard Controllers Overview and selection tools Product range overview Synco Webserver Standard systems for heating, ventilation or air conditioning Synco™ (KNX) Low engineering system to easily build complex applications with flexible and modular combinations of standard controllers Synco™ 700. Standard Systems for HVAC plants are capable to be remote operated and can generate alarms to service centers. Full control without extensive engineering.
Standard Controllers Overview and selection tools Product range overview Synco Communication central unit with RS-232 Modem connection Standard systems for heating, ventilation or air conditioning Synco™ (KNX) Low engineering system to easily build complex applications with flexible and modular combinations of standard controllers Synco™ 700. Standard Systems for HVAC plants are capable to be remote operated and can generate alarms to service centers. Full control without extensive engineering.
Standard controllers Communicating HVAC controllers Heating controllers RMH.. Heating controller RMH760B.. - Heating controller as primary controller or main controller (district heat) or heating circuit controller - Boiler temperature control - Control of max.
Standard controllers Communicating HVAC controllers Heating controllers RMH.. Range overview RMH760B.. Product Title Data sheet Stock No. Product No.
Standard controllers Communicating HVAC controllers Extension modules for RMH.. Heating circuit module RMZ782B - Weather-compensated flow temperature control via heating circuit's mixing valve - Control of heating circuit pump The available heating circuit control and supervisory functions are the same as those of the RMH760B Data sheet N3136 Voltage supply Power consumption Universal inputs‚ number Universal input‚ signal Supply from controller module 2 VA 3 LG-Ni1000 0...1000 Ohm 1000...
Standard controllers Communicating HVAC controllers Boiler sequence controllers RMK.. RMK770..
Standard controllers Communicating HVAC controllers Boiler sequence controllers RMK.. Range overview RMK770.. Product Title Data sheet Stock No. Product No.
Standard controllers Communicating HVAC controllers Extension modules and operator units for RMH.. and RMK.. RMZ790 Plug-in type operator unit - Operator unit plugs into the Synco™ 700 controllers For displaying and changing plant data for service staff and enduser Clear-text operation Can be plugged in and removed during operation Power supply via the controller Data sheet RMZ791 N3111 Stock No. Product No.
Standard controllers Communicating HVAC controllers Extension modules and operator units for RMH.. and RMK.. Range overview RMZ78.. Universal inputs‚ number Analog outputs‚ number Relay outputs‚ number Stock No. Product No. 8 0 0 BPZ:RMZ785 RMZ785 4 0 4 BPZ:RMZ787 RMZ787 4 2 2 BPZ:RMZ788 RMZ788 6 2 4 BPZ:RMZ789 RMZ789 Module connector RMZ780 Module connector for detached mounting of extension modules within the control panel. Distance for detached mounting: Maximum 10 m.
Standard controllers Communicating HVAC controllers Application examples RMH.. / RMK.. Application examples RMH760B.. and RMK770.. These are only a few examples of many applications that can be done with the with Synco™700 controllers: RMH760B.. / RMK770.. More Synco™700 applications are described in “HIT“ (the HVAC project engineering tool with a library of over 300 pre-configured HVAC-applications) and in the RMH760B.. / RMK770.. data sheet.
Standard controllers Communicating HVAC controllers Application examples RMH.. / RMK.. Weather-compensated heating control‚ heat generation‚ 2 heating circuits‚ d.h.w.
Standard controllers Communicating HVAC controllers Application examples RMH.. / RMK.. RMK770.. Boiler cascade‚ 2 boilers with 2-stage burners K6.2 V Control of the boiler temperature via 2-stage burner V Controlled boiler return temperature with 3-port valve and 3-position or DC 0…10 V actuator V Control of the boiler pumps V Common flow and return temperature control V Extension module RMZ789 needed RMK770..
Standard controllers Communicating HVAC controllers Application examples RMH.. / RMK.. Weather-compensated heating system‚ district heating connection‚ 2 heating circuits‚ d.h.
Standard controllers Communicating HVAC controllers Application examples RMH.. / RMK.. RMH760B.. Weather-compensated heating system‚ district heating connection‚ 2 heating circuits‚ d.h.w DADC04 H6B HQ To fulfill the classification‚ the plant must be equipped with all indicated functions.
Standard controllers Communicating HVAC controllers Field devices for RMH.. and RMK.. Sensors‚ setpoint adjusters Product Title Data sheet Stock No. Product No. Outside sensor LG-Ni1000 N1811 BPZ:QAC22 QAC22 Outside sensor NTC 575 Ohm N1811 BPZ:QAC32 QAC32 Strap-on temperature sensor LG-Ni1000 N1801 BPZ:QAD22 QAD22 Strap-on temperature sensor with cable LG-Ni1000 N1802 BPZ:QAD26.220 QAD26.220 Immersion temperature sensor 100 mm LG-Ni1000‚ with protection pocket N1781 BPZ:QAE2120.
Standard controllers Communicating HVAC controllers Universal controllers RMU.. RMU.. Universal controller - Universal controllers with integrated control and supervisory functions Tested‚ predefined applications (refer to Application Catalog) Flexible configuration Suited for the controlled variables temperature‚ relative / absolute humidity‚ pressure / differential‚ air flow rate‚ indoor air quality‚ etc.
Standard controllers Communicating HVAC controllers Universal controllers RMU.. Range overview RMU.. Universal inputs‚ Analog outputs‚ number number Relay outputs‚ number Control loops‚ number Loaded languages Stock No. Product No.
Standard controllers Communicating HVAC controllers Application examples RMU.. Application examples RMU710B.. These are only a few examples of many applications that can be done with the with Synco™700 controllers: RMU710B.. More Synco™700 applications are described in “HIT“ (the HVAC project engineering tool with a library of over 300 pre-configured HVAC-applications) and in the RMU710B.. data sheet. The evaluation of the energy efficiency classification is based on EN15232:2012.
Standard controllers Communicating HVAC controllers Application examples RMU.. Room-supply air temperature cascade control RMU710B..
Standard controllers Communicating HVAC controllers Application examples RMU.. RMU710B..
Standard controllers Communicating HVAC controllers Application examples RMU.. Room-supply air temperature cascade control RMU720B..
Standard controllers Communicating HVAC controllers Application examples RMU.. RMU720B..
Standard controllers Communicating HVAC controllers Application examples RMU.. Room-supply air temperature cascade and humidity control RMU720B..
Standard controllers Communicating HVAC controllers Application examples RMU.. RMU730B..
Standard controllers Communicating HVAC controllers Application examples RMU.. Room-supply air temperature cascade and humidity control RMU730B..
Standard controllers Communicating HVAC controllers Application examples RMU.. RMU730B.. Room-supply air temperature cascade and humidity control AEZH02 U3B HQ To fulfill the classification‚ the plant must be equipped with all indicated functions.
Standard controllers Communicating HVAC controllers Switching and monitoring device RMS.. Switching and monitoring device RMS705B.. In connection with the function blocks‚ the RMS705B complements the range of Synco700 products as a freely configurable unit for - control and supervisory functions in heating‚ ventilation and refrigeration plant - non-standard applications and‚ for this reason‚ offers no predefined standard applications.
Standard controllers Communicating HVAC controllers Switching and monitoring device RMS.. Range overview RMS705B.. Product Title Data sheet Stock No. Product No.
Standard controllers Communicating HVAC controllers Extension modules and operator units for RMU.. and RMS.. Plug-in type operator unit - RMZ790 Operator unit plugs into the Synco™ 700 controllers For displaying and changing plant data for service staff and enduser Clear-text operation Can be plugged in and removed during operation Power supply via the controller Data sheet N3111 Stock No. Product No.
Standard controllers Communicating HVAC controllers Extension modules and operator units for RMU.. and RMS.. Range overview RMZ78.. Universal inputs‚ number Analog outputs‚ number Relay outputs‚ number Stock No. Product No. 8 0 0 BPZ:RMZ785 RMZ785 4 0 4 BPZ:RMZ787 RMZ787 4 2 2 BPZ:RMZ788 RMZ788 RMZ780 Module connector Module connector for detached mounting of extension modules within the control panel. Distance for detached mounting: Maximum 10 m. Data sheet 5 N3138 Stock No.
Standard controllers Communicating HVAC controllers Field devices for RMU.. and RMS.. Sensors‚ setpoint adjusters Product Title Data sheet Stock No. Product No. Outside sensor LG-Ni1000 N1811 BPZ:QAC22 QAC22 Outside / room temperature sensor DC 0..10V N1814 BPZ:QAC3161 QAC3161 Strap-on temperature sensor LG-Ni1000 N1801 BPZ:QAD22 QAD22 Strap-on temperature sensor with cable LG-Ni1000 N1802 BPZ:QAD26.220 QAD26.
Standard controllers Communicating HVAC controllers Field devices for RMU.. and RMS.. Sensors‚ setpoint adjusters 5 Product Title Data sheet Stock No. Product No. Air duct differential pressure sensor‚ DC 0...10 V N1916_01 BPZ:QBM3020.. QBM3020.. Differential pressure sensor‚ DC 0...10 V N1910_01 BPZ:QBM2030.. QBM2030.. Duct sensor for humidity (DC 0...10 V) N1864 BPZ:QFM2100 QFM2100 Duct sensor for humidity (0...
Standard controllers Communicating HVAC controllers Field devices for RMU.. and RMS.. Monitors Product Title Data sheet Stock No. Product No. Frost detector‚ air side‚ 2-point A6V10432022 BPZ:QAF64..J QAF64..J Frost monitor‚ 2-point N1284 BPZ:QAF81.. QAF81.. Room hygrostat‚ setpoint setting range 30...90 % r.h.‚ setpoint adjuster inside device N1518 BPZ:QFA1000 QFA1000 Room hygrostat‚ setpoint setting range 30...90 % r.h.
Standard controllers Communicating HVAC controllers Field devices for RMU.. and RMS.. Room units 5 Product Title Data sheet Stock No. Product No.
Standard controllers Software and central communication units For web and remote operation via KNX: OZW77.. Standard systems main components The Synco standard system consists of the following main components: Product Title Data sheet Stock No. Product No. Commissioning and plant operating software N5649 S55800-Y100 ACS790 Central communication unit OZW771.. N3117 BPZ:OZW771.. OZW771.. Web server for Synco devices N5701 BPZ:OZW772.. OZW772.. Heating controller N3133 BPZ:RMH760B.. RMH760B.
Standard controllers Software and central communication units For web and remote operation via KNX: OZW77.. Standard systems main components The Synco standard system consists of the following main components: 5 Product Title Data sheet Stock No. Product No. Room controller for 3-speed fan N3877 BPZ:RXL21.1/FC-10 RXL21.1/FC-10 Room controller for 3-speed fan N3877 BPZ:RXL21.1/FC-11 RXL21.1/FC-11 Room controller with 3-speed fan and electric heating coil N3877 BPZ:RXL22.1/FC-12 RXL22.
Standard controllers Software and central communication units For web and remote operation via KNX: OZW77.. Web server for Synco devices OZW772.. Web server OZW772 allows for remote plant control and monitoring via the web.
Standard controllers Software and central communication units For web and remote operation via KNX: OZW77.. OZW771.. Central communication unit OZW771.. The OZW771… central communication unit is a component of the Synco™ system. It is used for the remote operation and supervision of plants with Synco™ 700 Synco™ RXB… and Synco™ living units in KNX network systems.
Standard controllers Software and central communication units Operating‚ service and alarm software for HVAC plants: ACS790 Commissioning and plant operating software ACS790 PC software for commissioning‚ operating and supervision of HVAC plants. Consists of 2 programs: ACS-Tool and ACS-Alarm.
Standard controllers Software and central communication units Interface for HVAC plants: OCI70.. OCI700.
Room automation Synco 6 Overview and selection tool Communicating controllers - RXL (Bus) Communicating controllers - RXB (KNX) Communicating room thermostats Central control unit RMB.. Room operator units Damper actuator (KNX) KNX accessories Product range overview 6-2 RXL Application 6-5 RXB Application 6-7 For fan coil‚ radiator‚ chilled ceiling 6-9 Field devices 6-11 For fan coil‚ radiator‚ chilled ceiling 6-13 Field devices 6-15 For fan coil units - Communicating KNX thermostat RDG..
Room automation Synco Overview and selection tools Product range overview RDF301.50 RDF301.
Room automation Synco Overview and selection tools Product range overview Room operation QAX.. Features 30.1 Display Mode selection Fan switch Setpoint adjuster Temperature sensor Mounting Flush-mounted Directly on wall Control panel(door) Communication PPS2 KNX 31.1 32.1 33.1 n n QAW.. 34.1 34.3 n n n 84.1 740 n n n n n n n n n n n n n n n n n n n n n n n n n n 39.1 n n n n n n n n n n n n n n n n n Controller RXL.. RXB..
Room automation Synco Overview and selection tools Product range overview RXL applications RXL – Powerful room controllers for temperature control in individual rooms RXL ensures individual demand-based comfort in public buildings, offices, schools, hotels, etc. Flexible control of all types of equipment in individual rooms calls for economical and convenient solutions that can be integrated into existing or new systems and will retain their compatibility long into the future.
Room automation Synco Overview and selection tools Product range overview Fields of application The scope of RXL is defined by the preprogrammed application software. The following pages provide an overview of the options and the corresponding devices. The devices are supplied preprogrammed with the applications. The required application can be selected by means of the Handy tool QAX34.3.
Room automation Synco Overview and selection tools Product range overview RXB applications RXB hardware The product range comprises compact controllers and corresponding room units for comfortable control. The compact room controllers are optimized to the respective application with regard to input/output configuration. HVAC functions are operated via standard room units. Communication is based on KNX S-mode. The fan coil room controllers communicate also in KNX LTE mode.
Room automation Synco Overview and selection tools Product range overview Fields of application The scope of RXB is defined by the preprogrammed application software. The following pages provide an overview of the options and the corresponding devices, divided into different areas of application. The devices are supplied preprogrammed with the applications. The required application can be selected by means of the ETS, Synco™ tool or the Handy tool QAX34.3.
Notes 6 6-8 Siemens Switzerland Ltd Building Technologies Division http://www.siemens.
Room automation Synco Communicating controllers - RXL (Bus) For fan coil‚ radiator‚ chilled ceiling Room controller with bus communication RXL2.. The controllers RXL2.. are used for temperature control in individual rooms. - For 2-pipe with changeover or 4-pipe fan coil systems - Control of thermic valve actuators AC 24 V‚ PDM‚ valve and damper actuators AC 24 V (3-position) - Volt-free relay contacts for fan speed control - Relay for electric heating (RXL22.
Room automation Synco Communicating controllers - RXL (Bus) For fan coil‚ radiator‚ chilled ceiling RXL39.1/FC-13 Communicating room controller for fan-coil applications with proprietary communication The RXL39.1 room controller is used for temperature control in individual rooms. - For 2-pipe and 4-pipe fan coil systems with or without changeover - PI control - Proprietary bus communication - Connection to Desigo building automation and control system via PX KNX - DC 0...
Room automation Synco Communicating controllers - RXL (Bus) Field devices Room units for RXL.. Product Title Data sheet Stock No. Product No. Room unit with sensor and PPS2 interface N1741 BPZ:QAX30.1 QAX30.1 Room unit with sensor‚ setpoint adjuster and PPS2 interface N1741 BPZ:QAX31.1 QAX31.1 Room unit with sensor‚ setpoint and operating mode selector and PPS2 interface N1641 BPZ:QAX32.1 QAX32.
Room automation Synco Communicating controllers - RXL (Bus) Field devices Damper actuators for RXL.. Product Title Data sheet Stock No. Product No. Rotary air damper actuators 5 Nm‚ without spring return N4634 BPZ:GDB..1E GDB..1E Linear air damper actuators 125 N‚ without spring return N4664 BPZ:GDB..2E GDB..2E Rotary air damper actuators 10 Nm‚ without spring return N4634 BPZ:GLB..1E GLB..1E Linear air damper actuators 250 N‚ without spring return N4664 BPZ:GLB..2E GLB..
Room automation Synco Communicating controllers - RXB (KNX) For fan coil‚ radiator‚ chilled ceiling Room controller with KNX communication RXB2.. The controllers are used for temperature control in individual rooms. - For 2-pipe with changeover or 4-pipe fan coil systems - For radiator and chilled ceiling (RXB24.
Room automation Synco Communicating controllers - RXB (KNX) For fan coil‚ radiator‚ chilled ceiling RXB39.1/FC-13 Room controller for fan-coil applications with KNX communication The RXB39.1 room controller is used for temperature control in individual rooms. - For 2-pipe and 4-pipe fan coil systems with or without changeover - PI control - KNX bus communication - Connection to Desigo building automation and control system via PX KNX - DC 0...
Room automation Synco Communicating controllers - RXB (KNX) Field devices Room units for RXB.. Product Title Data sheet Stock No. Product No. Room unit with sensor and PPS2 interface N1741 BPZ:QAX30.1 QAX30.1 Room unit with sensor‚ setpoint adjuster and PPS2 interface N1741 BPZ:QAX31.1 QAX31.1 Room unit with sensor‚ setpoint and operating mode selector and PPS2 interface N1641 BPZ:QAX32.1 QAX32.
Room automation Synco Communicating controllers - RXB (KNX) Field devices Dewpoint sensors for RXB.. Product Title Data sheet Stock No. Product No. Condensation monitor‚ AC/DC 24 V N3302 S55770-T325 QXA2601 Condensation monitor‚ AC/DC 24 V‚ with remote sensor head (cable length 1.5 m) N3302 S55770-T326 QXA2602 Condensation monitor‚ AC 230 V N3302 S55770-T327 QXA2603 Condensation monitor‚ AC 230 V‚ with remote sensor head (cable length 1.
Room automation Synco Communicating room thermostats For fan coil units - Communicating KNX thermostat RDG.. / RDF.. Room thermostat with KNX communications‚ AC 230 V‚ for fan coil units and universal applications RDG100KN - KNX communications - 3 multifunctional inputs for keycard contact‚ external room / return air temperature (QAH11.
Room automation Synco Communicating room thermostats For fan coil units - Communicating KNX thermostat RDG.. / RDF..
Room automation Synco Communicating room thermostats For fan coil units - Communicating KNX thermostat RDG.. / RDF..
Room automation Synco Communicating room thermostats For fan coil units - Communicating KNX thermostat RDG.. / RDF..
Room automation Synco Communicating room thermostats For fan coil units - Communicating KNX thermostat RDG.. / RDF.. Flush-mount room thermostats with KNX communications‚ 2-/4-pipe fan coils or DX type equipment RDF..
Room automation Synco Communicating room thermostats For VAV systems - Communicating KNX thermostat RDG.. / RDU.. RDG400KN Room thermostat with KNX communications‚ AC 24 V‚ VAV heating and cooling systems - KNX communications - Output DC 0…10 V for VAV actuator and auxiliary output ON/OFF‚ PWM or 3-position or 3-position for VAV actuator and auxiliary output DC 0...10 V - 2 multifunctional inputs for keycard contact‚ external room / return air temperature (1x‚ QAH11.
Room automation Synco Communicating room thermostats For VAV systems - Communicating KNX thermostat RDG.. / RDU.. Semi Flush-mount room thermostat for rectangular conduit box with KNX communications‚ for VAV application RDU341 Semi Flush-mount room thermostat for VAV application - KNX communications - Output for a DC 0…10 V actuator and AC 230V electrical heater (ON-OFF) - 2 multifunctional inputs for keycard contact‚ external room / return air temperature (QAH11.
Room automation Synco Communicating room thermostats For heating units - Communicating KNX thermostat RDD810KN/NF Touch screen room thermostat with KNX communications‚ for heating application (for China frames) Touch screen room thermostat for heating application (for China frames) - KNX communications - Operating modes: Comfort‚ Economy and Protection - Control output: changeover contact (SPDT) - 2 multifunctional inputs for keycard contact‚ external room / return air temperature (QAH11.
Room automation Synco Central control unit RMB.. For room controller and room thermostats RXB.. / RXL.. / RDG.. / RDF.. / RDU.. Central control unit RMB795B for room controllers and room thermostats RMB795B..
Room automation Synco Central control unit RMB.. For room controller and room thermostats RXB.. / RXL.. / RDG.. / RDF.. / RDU.. Range overview RMB795B.. Product Title Stock No. Product No.
Room automation Synco Central control unit RMB.. Extension modules and operator units for RMB.. Operator units for RMB.. Product Title Data sheet Stock No. Product No. Plug-in type operator unit N3111 BPZ:RMZ790 RMZ790 Detached operator unit with 3 m cable N3112 BPZ:RMZ791 RMZ791 Product Title Data sheet Stock No. Product No.
Room automation Synco Room operator units For controllers RX.. (PPS2): QAX3.. / QAX8.. QAX3.. Room unit with PPS2 interface Room units for acquiring the room temperature and operation of individual room control. Power consumption Interface for controller Interface for service Sensing element‚ temperature Measuring range‚ temperature Time constant Measurement accuracy Setpoint readjustment range Degree of protection Mounting location Mounting QAX30.1 0.10 VA PPS2 PPS2 on RJ45 NTC 0...40 °C L8 min ±0.
Room automation Synco Room operator units For controllers RX.. (PPS2): QAX3.. / QAX8.. Room unit with sensor‚ setpoint and operating mode selector‚ fan speed selection‚ and PPS2 interface QAX33.1 - Acquisition of room temperature - Setpoint adjuster for room temperature - Rocker switch for mode selection (Off/Auto) and for manual fan control with fan coil systems (up to 3 speeds) Data sheet N1642 Dimensions (W x H x D) 90 x 100 x 36 mm Stock No. Product No. BPZ:QAX33.1 QAX33.
Room automation Synco Room operator units For controllers RX.. (PPS2): QAX3.. / QAX8.. QAX84.1/PPS2 Flush-mounted room unit complete with PPS2 interface and design frame The set consists of: - Operator unit‚ - PPS2 bus coupling unit and - Design frame DELTA line in titanium white.
Room automation Synco Room operator units For controllers RM.. (KNX) QAW74.. Room unit with KNX bus QAW740 Configurable unit with display of operating mode‚ timer‚ temperatures and fault. With 3 operating elements: - Knob for setpoint readjustments - Operating mode button - Timer button Data sheet N1633 Setpoint readjustment range Measuring range‚ temperature Communication Connection cable Degree of protection Dimensions (W x H x D) ±3 K 0...50 °C KNX TP1 EE 2-wire IP20 96 x 96 x 47 mm Stock No.
Room automation Synco Room operator units Room operator units QMX3.. (KNX) QMX3.. Wall-mounted room sensors and operator units for KNX The wall-mounted room unit QMX3.. consists of: - Base plate - Sensor or room operator unit The following functions are (depending on type): V Temperature sensor or multisensor (T‚ r.h.
Room automation Synco Room operator units Room operator units QMX3.. (KNX) Room operator unit KNX with temperature sensor‚ segmented backlit display‚ touchkeys QMX3.P34 Functions: V Temperature sensor V Segmented backlit display and touchkeys Stock No. Product No. S55624-H105 QMX3.P34 Room operator unit KNX with sensors for temperature‚ humidity‚ CO2‚ segmented backlit display‚ touchkeys QMX3.
Room automation Synco Room operator units For controllers RX.. (EnOcean): QAX9.. / RXZ9.. QAX95.4 Room unit with EnOcean interface V V V V V Acquisition of the room temperature Powered by solar cell A gateway is mandatory (EnOcean / KNX) Optional use of battery if light conditions are insufficient Including design frame DELTA line‚ titan white For use with units from the following product ranges: - RXB (together with gateway EnOcean/KNX‚ RXZ97.1/KNX) - Devices with KNX Communication 6 QAX96.
Room automation Synco Room operator units For controllers RX.. (EnOcean): QAX9.. / RXZ9.. Room unit with EnOcean interface‚ setpoint adjuster‚ button and switch V V V V V V V V QAX97.
Room automation Synco Room operator units For controllers RX.. (EnOcean): QAX9.. / RXZ9.. RXZ97.
Room automation Synco Damper actuator (KNX) VAV compact controller with KNX VAV compact controller KNX G..B181.
Room automation Synco KNX accessories Transformers SEM62.. Transformers Transformer with housing‚ providing a reduction in voltage from AC 230 V to AC 24 V (output power 30 VA) - Self-resetting fuse integrated on the primary side - Secondary On/Off switch and replaceable fuse (SEM62.
Room automation Synco KNX accessories KNX - System components IP router V V V V V V V V V V V V V N 146/02 LEDs for indicating that the device is ready-to-run‚ KNX communication‚ IP communication Electronics powered via an external nominal 24 V AC/DC power supply unit Power consumption at 24 V DC 57 mA Power supply for the electronics via "Power over Ethernet" according to IEEE 802.
Room automation Synco KNX accessories KNX - System components N 148/11 USB interface V V V V V V V Electronics powered via bus voltage or via USB by a connected PC Integrated bus coupling units Bus connection via bus terminal or contact system to data rail Transmission PC D USB USB 1.1 or higher Electrically isolated access to the bus line via integrated socket USB (Typ B) Access to all bus devices in the system Modular installation devices for mounting on TH35 EN 60715 mounting rail Data sheet 2.11.1.
Room automation Synco KNX accessories KNX - Line Couplers Line/backbone coupler N 140/..
Room automation Synco KNX accessories KNX - Power Supply Units N 125/..2 Power supply unit V V V V V Integrated chokes Bus connection via bus terminal or contact system to data rail Rated operational voltage 120...230 V AC 50...60 Hz‚ 220 V DC Output voltage 29 V DC Additional unchoked output for 29 V DC‚ for powering a second bus line via an external choke (e. g.
Siemens Switzerland Ltd Building Technologies Division International Headquarters Gubelstrasse 22 6301 Zug Switzerland Tel +41 41 724 24 24 The information in this document contains general descriptions of technical options available, which do not always have to be present in individual cases. The required features should therefore be specified in each individual case at the time of closing the contract. The document contains a general product overview. Availability can vary by country.