Catalog

4-8
Siemens Switzerland Ltd http://www.siemens.com/buildingtechnologies-productcatalog 2015
Building Technologies Division
4
Room automation
Overview and selection tools
Configurable Room Automation Station with BACnet
Room sensor and operating
Application can be configured from these functions:
• Room operating units QMX3 on KNX PL-Link
• Sensors for onboard IO’s or KNX PL-Link
• Presence/brightness sensors for onboard IO’s or KNX PL-Link
• Push buttons for light and shading on KNX PL-Link
• Window contacts for onboard IO’s
• Collision detectors for onboard IO’s
T
AQ
H
Lux
Temperature
sensor
Air quality Sensor Humidity sensor Brightness sensor Presence detector Collision detector
DI 2 2
AI 1 1 1
HVAC Sensor (KNX PL-Link) 1 1 1
Presence and brightness
sensor (KNX PL-Link)
1 1-4*
Room unit (KNX PL-Link) 1 1 1
Combined room unit
(KNX PL-Link)
1
* Must be the same device
Window contact Room operator unit Light control Shading control Combined control
DI 1
Room unit (KNX PL-Link) 2*
Combined room unit
(KNX PL-Link)
1** 1 1 1
Push button (KNX-PL-Link) 1-2**** 1-2**** 1***
* Must be the same device
** Can not be combined with additional push button devices (KNX PL-Link)
*** Can not be combined with additional light or blind control devices
**** Must be the same device and every light group is switched by maximum one push button or dimmed by one pair of push buttons