User Manual

The IP Control Center application modules were
updated in the framework of firmware V4 with
important management functions and interfaces.
New application modules
With the timer function, the lighting is controlled
depending on the time and day of the week without
manual operation. Likewise, sunshades are opened
and closed at sunrise and sunset. This guarantees
maximum comfort in the room through complete
automation based on individual needs.
The scenario module offers maximum comfort in that
an individually configured room setting (for example,
comfort temperature within a specific lighting level/
shading position) can be activated by just a push of
a button. At the same time, an individual room setting
can be saved as a scenario. To create a specific room
atmosphere, delayed sequence control ensures a
pleasant atmosphere.
Along with the control of heating, ventilation, lighting
and sun protection, IP-based devices such as projectors,
receivers, audio/video, etc. can be equally integrated
in room automation via KNX.
Using the fully graphical logic module up to 1,000 logic
functions to control building functions can be planned
by drag and drop.
The alarm module allows for visual and acoustic alarm
notifications with a date and time stamp via push notifi-
cations, which can be e-mailed to multiple recipients.
All registered alarm notifications are recorded and can
be forwarded as an e-mail attachment.
Furthermore, logged data, for example weather data
or consumption levels, can be sent to up to 20 contacts
using the e-mail function. Editing is possible using a
spreadsheet program.
To optimize energy costs, consumption levels can be
registered, evaluated, and presented graphically in
diagrams in the chart module. Corresponding energy
savings measures can be derived from this.
The monitoring module serves as a service tool for
the system integrator or system operator. The relevant
commands from the KNX system are logged and thus
contribute to efficient error diagnostics and trouble-
shooting.
Application module for more functionality
• The interfaces for SONOS speakers and Philips HUE
enable the control of both music playback and the
light system through room automation with KNX.
• For more security, a simple presence simulation
within the timer function provides preventive burglary
protection.
New application modules in firmware V4
• The data point management module provides important
support with planning the KNX system. With extensive
search and filter functions, it is used for clear display,
management, editing and categorization of all available
data points.