Data Sheet for Product

ManualsBrandsSiemens ManualsFire - Detectors & PeripheralsPulsador manual

Building Technologies

CPS Fire Safety

DM1103(Ex), DM1104(Ex)

AlgoRex

Synova™

Sinteso™

Cerberus

PRO

Manual call points

collective/SynoLINE600

for explosion-hazard areas of zones 1 and 2

 Manual call point to all fire detection system control units with

collective/SynoLINE600 detector evaluation

 Manual call point DM1103 with indirect operation

 Manual call point DM1104 with direct operation

 Connection to the detection line via the DC1192 input/output module

– for galvanic isolation and connection to the collective/SynoLINE600, interactive or

AnalogPLUS/SynoLOOP fire detection system

 Connection to the detection line via the transponder FDCIO223

– for galvanic isolation and connection to the addressable FDnet/C-NET fire detec-

tion system

 Two-wire installation

Summary of content (4 pages)

PAGE 1
DM1103(Ex), DM1104(Ex) AlgoRex Synova™ Sinteso™ Cerberus® PRO Manual call points collective/SynoLINE600 for explosion-hazard areas of zones 1 and 2  Manual call point to all fire detection system control units with collective/SynoLINE600 detector evaluation  Manual call point DM1103 with indirect operation  Manual call point DM1104 with direct operation  Connection to the detection line via the DC1192 input/output module – for galvanic isolation and connection to the collective/SynoLINE600, interact
PAGE 2
Characteristics  Environmental – Ecologically processing – Recyclable materials – Electronic and synthetic material simple separable  Characteristics – Protected electronic – Alarm indicator (LED) built-in Manual call points DM1103(Ex), DM1104(Ex) A protective cover DMZ1197-AC (accessory) protects the manual call point from unintentional glass break. A seal DMZ1197-AD (accessory) protects the manual call point in wet applications.
PAGE 3
Installation in explosion-hazard areas Equipment installed in explosion-hazard areas must always comply with local national regulations. The DC1192/FDCIO223 input/output module and the series-connected SB3 shunt Zener diode barrier are used as a galvanic isolation between explosion-hazard and non hazardous areas.
PAGE 4
Technical data DM1103, DM1104 DM1103 Operating voltage Max. current, permanent DC 16... 26 V 60 mA Max. pulsed current 100 mA 0.28... 1.5 mm2 Terminal block Operating temperature -25... +70 °C Storage temperature -30... +75 °C Humidity (no condensation) ≤95 % rel. Connection factor KMK DM1104 1 Color red, ~RAL 3000 Protection category IEC60529 – with seal DMZ1197-AD Standards IP54 IP65 EN54-11 Ex-classification 'simple apparatus' in compliance with EN60079-11, chapter 5.