User Manual

Migration procedures
49
Building Technologies
016_DMS_DMS8000_Migration_from_DMS7000_MP4.15_A6V10062443_a_en.doc
Fire Safety & Security Products
06.2008
Uncheck any selected operating procedures.
Uncheck the box None.
Select the operating procedure to be assigned.
If you do not see all the previously defined operating procedures, it might be a refresh problem in
Composer. In order to bypass this problem, select another data point and reselect the one you want
to configure.
Fig. 37 Composer: Point Operating Procedures extensor tab
A
Enable / disable all default assignments
B
List of properties
C
Selected property
C1
Default state of the property (no modification is normally required here)
C2
Close-off state of the property (no modification is normally required here)
C3
Enable auto-close of the property
C4
Enable auto-ack for the property
C5
Intervention text for the property
C6
Enable / disable the auto-assignment of op.procedures and assign a procedure manually