User Manual

Introduction

Building Technologies 008901_a_en MM8000 MP3.15 Release Notes

Fire Safety & Security Products 09.2005

1.3 Bug correction

This section presents the list of the most important bugs corrected in MP3.15 in

comparison with previous release MP3.10 (up to and including 3.10-03 service re-

lease).

1.3.1 Corrections in MP3.15

Installation

6413 MM8000 could not be installed on a Windows 2000 PC in Russian.

6770 Troubles in installing the Cerloop/ISO1745 driver on Windows XP SP2.

Communication

6657 Changing the MM8000 system time did not cause the time telegram to be

transmitted to the Cerloop/ISO1745 units in the field.

6665 The daily time telegram to the Cerloop/ISO1745 units was transmitted with

35/40 sec. delay.

Maintenance Mode

6685 Geographical nodes were not properly set in maintenance mode.

CS11 AlgoRex

6474 Loss of CC11-EP7 point on a map after re-importing the node with a modified

physical link.

6608 Erroneous diagnostic status has been corrected on CS11 systems including

dual CK11 gateway.

6713 Troubles in re-importing CC11 and FC700A metafiles after a move / renumber-

ing function in the AlgoRex tool.

(Please, note that AlgoWorks Move function is not fully supported. See

also paragraph 4.2 - “Move” function in AlgoRex tool).

Dialler

6771 Dialler step prevented subsequent SMS/e-mail notification steps to work prop-

erly.

6775 In case there is only one modem or one contact, user is no longer prompted to

select the only option.

HTML support

6841 Security weakness corrected in the HTML browsing during treatment. The

“recent viewed pages” could be reached.

Alarm printout

6059 Two printers used for alarm printout could not be set for different paper size.

6558 In the Alarm Printers, the Description field was used during the Download

phase for setting the PrinterName in the PrinterManager fields. This implied

that the printer description could not be modified; else the printing function did

not work any longer.

Plant browser

6355 On Win XP client station, a false “Software error” on the station node has been

corrected.