User Manual

Known issues in MP3.20

Building Technologies 009421_a_en MM8000 MP3.20 Release Notes.doc

Fire Safety & Security Products 06.2006

SISTORE AX

Note that SISTORE AX can support only one client at the time. When one MM8000

station is connected to the video unit to show video images, no other station can

connect at the same time.

SISTORE MX

a. The SISTORE MX 2.55 must be used with the remote player of SISTORE

MX 2.57.

b. The archive player shows the control buttons (e.g. Play, Stop, Rewind,

etc.) on the very right of the screen and therefore they are not visible most

of the time.

Note: The Replay Toolbar (WC1) in SISTORE MX 2.57 player shows up

together with the timeline on the left, thus covering the timeline; the actual

replay toolbar containing recorded video controls is located on the right and

is not visible. In SISTORE Remote Viewer 2.45 and 2.50 you could only

see this part of the toolbar (without the timeline).

c. Recording with Pre-trigger (e.g. Automatic recording in case of an event),

is not possible.

Note: In order to work with MM8000, SISTORE MXPro 2.45 and 2.50 re-

quires the “Enable Software trigger” checkbox to be checked in the con-

figuration. Instead, with SISTORE MX 2.55 and 2.57, the “Long time re-

cording” schedule also has to be enabled to work-around a defect in the

communication with MM8000. Unfortunately, this solution prevents the pre-

trigger function from working.

d. Stopping the recording is not possible from the MM8000 (Recording is only

stopped when the configured delay expires in SISTORE).

We recommend that you upgrade SISTORE MX to V2.58 as soon as it is available.

This version is expected to fix problems b and c. For more information, please con-

tact support.

Updated in 3.20

SISTORE MX

IP cameras can now be connected to the MX.