User Manual

Configuring CCTV network
17
Building Technologies
048_DMS_DMS8000_Connectivity_Video_MP4.30_A6V10062457_a_en.doc
Fire Safety & Security Products 06.2010
Fig 11 Connecting a Telscan IP Camera to the video driver
Connecting the video cameras to TELSCAN
1. Select and expand the TELSCAN node.
2. Select and expand the camera node.
3. Select the video-out node of the camera.
4. Drag and drop the Video Out signal to a TELSCAN Video In node (Fig 12).
Fig 12 Connecting cameras to TELSCAN
2.6.3 TELSCAN configuration tips
 Check that TELSCAN firmware version is V2.0 or later.
Note that firmware update is possible with the support of the CCTV Hotline.
 Do not forget to transfer to TELSCAN the customisation file from the setting
page in Composer (see p. 16).
 Video applications recommended for TELSCAN:
– MozillaControl15 ActiveX (recommended for better performance and man-
datory for Siemens IP cameras).