User Manual

Configuring CCTV network
29
Building Technologies
048_DMS_DMS8000_Connectivity_Video_MP4.30_A6V10062457_a_en.doc
Fire Safety & Security Products 06.2010
Fig 21 Connecting cameras to SISTORE
Creating video outputs and connecting the monitors
1. Select and expand the SISTORE node.
2. Select and expand the SISTORE Video Out folder.
3. Add the required video outputs: note that output number can be customised.
4. Select and expand the Video Monitors folder.
5. Select the video-out node of the SISTORE.
6. Drag and drop the Video Out signal to the monitor Video In node (Fig 22).
Fig 22 Connecting SISTORE to monitors
Configuring alarm inputs
1. Select and expand the SISTORE node.
2. Select and expand the Alarm Input folder.
3. Add the required alarm inputs: note that input number can be customised.
4. Select the Alarm Input node and its Node tab.
5. Set NO or NC logic (Fig 23).
Fig 23 Connecting SISTORE to monitors