User Manual

Building Technologies

MM8000 Installation, Function & Configuration, Commissioning, Safety Regulations

Fire Safety & Security Products

06.2009

Referring to Fig.67, note the following configuration settings:

– User Allen Brimley is a member of the Advanced Operator Group 1

(Fig.67-A).

– In

the Fire Safety Profile, the Advanced Operator Group 1 (Fig.67-B) is as-

sign

ed permissions or privileges – in this case, it has Full Control privileges

(Fig.67-C).

–

What the group users can see and control is determined, e.g. in the Fire Pro-

tection folder, by the associated Profile Id (Fig.67-D) and the related permis-

sion

s (Fig.67-E).

–

An additional profile (Intrusion Profile, not shown in the figure) is associated to

the Intrusion Protection folder. On this profile, the Advanced Operator

Group 1 will only have Display privileges.

Result: Brimley can see events generated by, and send commands to the CZ10

and CS11EP5 subsystems, which inherit the same profile as the parent folder, but

can only see events and states of the CS4-40 intrusion subsystem.

Fig.67 Security profile example

A Users belong to a user Group

B User groups are linked to a Profile

C In the Profile, Groups get a Permission Type

D Nodes in the tree are associated to a Profile; by default, the profile association is inhered from the parent node

E The Profile association defines the Permission type of the Group (and related Users) on the node