User Manual

77
Building Technologies
MM8000 Installation, Function & Configuration, Commissioning, Safety Regulations
Fire Safety & Security Products 06.2009
4.6.4 Point icon customisation
4.6.4.1 Global modifications
In the event style page (Supervision System settings Æ MM8000 system Æ
Logical Configuration Æ User Data ÆEvents and Points Æ Style, Fig.81) you
can
configure the icon associated to the point types. This icon is used for all the in-
stances of the point type. In order to modify it globally, i.e. for all those point types
of all control units, select a new icon in the drop down list (see Fig.82).
Not
e: The icons are listed in ascending order in relation to their identification num-
ber.
Fig.82 Modifying the icon associated to CC11 fire zones
Note: If you wish to modify the icon associated to a single point, use the Point Ex-
tensor tab of the specific point. See 4.13.2.2 at p.131.
Any icon change affects both the Composer tree and the MM8000 tree and graphics.
4.6.4.2 Adding new icons
New icons can be easily added to the project for graphic customisations. Select:
Supervision System settings Æ MM8000 system Æ Logical Configuration Æ
User Data Æ Events and Points
and then click the Custom Icons tab. In the form page that displays, you can add or
delete custom icons (see Fig.83).
Fig.83 Adding custom icons
Click Add icon to select the icon file (ICO Windows file) to add. The imported icons
show in the collection space illustrated in the following Fig.84.