User Manual

ManualsBrandsSiemens ManualsFire - DMS8000 Network & TerminalsMT8001 MP3.15 Management Terminal Installation Function & Configuration Commissioning Safety Regulations

Bug correction

Building Technologies 073_DMS_MM8000_Release_Notes_MP3.20-02_A6V10067812_a_en.doc

Fire Safety & Security Products 04.2007

ID Description Notes

6598 An occasional (and erroneous) “Server not

available” message used could appear on the

MM8000 client screen.

6836 In the Scheduler configuration tool, selection

field associated to "Every week on" was not

correctly managed.

7390 In the CC11 EP7 import procedure, Sinteso

detector texts were not properly set (missing

sequential number).

7294 The "Points not inserted in maps" export does

not work correctly with special characters.

7083 Virtual properties reporting the “Bolt Open” and

“Lock Supervision” conditions of CS440 zones

have been added.

5663 Missing tool-tip texts in simple treatment mode.

6797

6798

In Map Maker, the control button text was not

handled correctly and it did not appear properly

in the preview.

7569 The History Report layout modified by the user

was not saved and then restored properly.

5826 Wrong time stamp of Scheduler events (e.g.

Time programs) in the journaling printouts.

6315 Message warning the user about the conse-

quences of setting nodes in maintenance mode

has been changed in order to make clear that

the control unit in the field is not affected by

this.

6212 User Group description texts longer than 64

chars could not be handled properly by the

MM8000 client applications.

6764 Improved performances and robustness of

MM8000 servers, now tested to handle over

150 events in 60 seconds.

7388 User interface problems have been solved

using 1600x1200 screen resolution.

Also repaired in MM8000

MP3.15 Hotfix #02

7258 Error in handling the SiPass door status if a

door was unlocked while in forced or held

status.

6280 The "Point property" description has been re-

placed with "Live video" when selecting a Video

camera on a graphic map.

6669 Commands executed from the point property

window were not traced in the event protocol.

7848 Problems in some control commands to CC11

sections including over 70 zones. The correc-

tion requires updating the NK822x firmware.