User Manual

Building Technologies
Fire Safety & Security Products
Multi Zone - ( FIDEZOMU )
In a Multi-Logic Fire Zone the alarm decision is based on the response of multiple detection elements affiliated with the zone. The conditions can be parameterised within the FC700A.
Multistate Commands
1-Ack 2-Reset 4-Arm 8-Disarm 16-Test 32-Active 64-Quiet 128-Disc 256-Conn 512-Block 1024-Man 2048-Status
500 Alarm Unack
The zone is in Alarm. The event should now be acknowledged by the operator.
502 Alarm Unreset
The event should now be reset by the operator.
800 Prealarm Unack
The zone is in pre alarmThe event should now be acknowledged by the operator.
802 Prealarm Unreset
The event should now be reset by the operator.
1000 Quiet
No abnormal conditions present.
1105 Test Ack
The event has been acknowledged.
1106 Test Unack
The zone is switched in test mode. The event should now be acknowledged by the operator.
1305 Disarmed Ack
The event has been acknowledged.
1306 Disarmed Unack
The zone is switched off. The event should now be acknowledged by the operator.
Page 16 of 95