User Manual

Building Technologies
Fire Safety & Security Products
Build. Serv. Zone Progr. - ( BSCOZOPG )
The Building Services Control Zone object represents a zone that generates (activates) a signal when it detects a state of danger. It evaluates whether a situation should be considered dangerous based on
parameters that were configured into the zone. With
Multistate Commands
1-Ack 2-Reset 4-Arm 8-Disarm 16-Test 32-Active 64-Quiet 128-Disc 256-Conn 512-Block 1024-Man 2048-Status
946 Active Unack
The zone is active. The event should now be acknowledged by the operator.
947 Active Ack
The event has been acknowledged.
1000 Quiet
No abnormal conditions present.
1305 Disarmed Ack
The event has been acknowledged.
1306 Disarmed Unack
The zone is switched off. The event should now be acknowledged by the operator.
1999 Fault Ack
The event has been acknowledged.
2000 Fault Unack
The fault conditions was detected. The event should now be acknowledged by the operator.
Page 26 of 95