User Manual

Building Technologies
Fire Safety & Security Products
Unidentified event - ( SYNOUDGE )
The `unindentified event` indicates the conditions, which could not be associated with any known object in the current structure. This typically happens when the logical tree imported into the system configuration
does not exactly match the local FC700A set
Multistate Commands
1-Ack 2-Reset 4-Arm 8-Disarm 16-Test 32-Active 64-Quiet 128-Disc 256-Conn 512-Block 1024-Man 2048-Status
401 Alarm & Tamper Ack
This event is the combination of the Alarm and Tamper state. The event has been acknowledged.
501 Alarm Ack
The event has been acknowledged.
511 Alarm & Fault Ack
This event is the combination of the Alarm and Fault state. The event has been acknowledged.
901 Tamper Ack
The event has been acknowledged.
911 Tamper & Fault Ack
This event is the combination of the Tamper and Fault state. The event has been acknowledged.
1000 Quiet
No abnormal conditions present.
1300 Disarmed
1351 Anomaly Ack
The event has been acknowledged.
1999 Fault Ack
The event has been acknowledged.
Page 61 of 95