User Manual

Building Technologies
Fire Safety & Security Products
Analog plus line - ( HWDADCAD )
Representation of a DS11-A (AnalogPlus) detector line.
Multistate Commands
1-Ack 2-Reset 4-Arm 8-Disarm 16-Test 32-Active 64-Quiet 128-Disc 256-Conn 512-Block 1024-Man 2048-Status
500 Alarm Unack
The event should now be acknowledged by the operator.
502 Alarm Unreset
The object is in Alarm state. The event should now be reset by the operator.
510 Alarm & Fault Unack
This event is the combination of the Alarm and Fault state. The event should now be acknowledged by the operator
511 Alarm & Fault Ack
This event is the combination of the Alarm and Fault state. The event has been acknowledged.
512 Alarm & Fault Unreset
This event is the combination of the Alarm and Fault state.The event should now be reset by the operator.
1000 Quiet
No abnormal conditions present.
1305 Disarmed Ack
The event has been acknowledged.
1306 Disarmed Unack
The line is disarmed. The event should now be acknowledged by the operator.
1999 Fault Ack
The event has been acknowledged.
Page 82 of 95