User Manual

Building Technologies
Fire Safety & Security Products
The `Remote transmission device - collective` object represents the state of the parallel connected (8 channels) remote transmission device for simple alarming over PSTN.
Remote device collective - ( INNORDCO )
Multistate Commands
1-Ack 2-Reset 4-Arm 8-Disarm 16-Test 32-Active 64-Quiet 128-Disc 256-Conn 512-Block 1024-Man 2048-Status
900 Tamper Unack
This condition indicates that the detector has been tampered with; the event should now be acknowledged by the operator.
902 Tamper Unreset
The event should now be reset by the operator.
910 Tamper & Fault Unack
This event is the combination of the Tamper and Fault state.The event should now be acknowledged by the operator.
911 Tamper & Fault Ack
This event is the combination of the Tamper and Fault state. The event has been acknowledged.
912 Tamper & Fault Unreset
This event is the combination of the Tamper and Fault state. The event should now be reset by the operator.
1000 Quiet
No abnormal condition present.
1999 Fault Ack
The event has been acknowledged.
2000 Fault Unack
A fault condition has been detected on the Power Supply.
The event should now be acknowledged by operator.
Page 55 of 70