User Manual

Configuring other control units
216
Building Technologies
DMS8000 Network, Fire, and Intrusion Connectivity Configuration Guide
Fire Safety & Security Products 06.2009
Fig. 194 Adding I/O modules
A Click this icon to add a DF9040 ON/OFF input modules
B Click this icon to add a DF8045 supervised input module (NO)
C Click this icon to add a DF9020 output modules
D Click this icon to add a DF8046 supervised input module (NC)
Linking the DF8000/CF9000 to the Communication network
Link the DF8000/CF9000 node to the CDI-Net or NK8000:
1. Expand the network folders until you reach the node that represents the
network that is physically connected to the DF8000/CF9000 line (CDI-Net or
NK8000).
2. Select the first of the DF8003/CF9003 units in the subsystem.
3. Drag and drop the DF8003/CF9003 node to the network node (see Fig. 195).
Not
e: The valid link positions on CDI-Net/NK8000 gateways are distributed
along the subsystem lines.
Composer helps you in recognising a valid link by showing a shortcut Link icon
instead of the circle No-link icon .