User Manual

Configuring networks and network components
78
Building Technologies
DMS8000 Network, Fire, and Intrusion Connectivity Configuration Guide
Fire Safety & Security Products 06.2009
Fig. 68 LANTRONIX Redirector: Configuration
As the first step, click the Com Setup button and select the COM port(s) that you
want to use (e.g. COM5). Close the window with OK.
Fig. 69 LANTRONIX Redirector: COM ports setup
Then, click Advanced and:
− Set the TCP keep alive time to 30000 ms
− Check the Run as a service box
− Confirm with OK
To correctly run the Lantronix Redirector in service mode, it is necessary to manually
remove a registry value. Open the Windows registry editor and delete the key:
"Redirector"="C:\\Program Files\\Lantronix\\Redirector\\red32.exe" under the
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
] section. This will prevent the Lantronix Redirector software from closing the com-
munication when the Windows user logs off.
Fig. 70 LANTRONIX Redirector: Advanced settings
At this point, in the main page, select the COM port and click Add IP. Then, fill in
the form that appears, insert IP address and TCP port. These parameters should
be consistent with the corresponding options set in the UDS1100.