User Manual

HW Installation
33
Building Technologies sst2.doc
Fire Safety & Security Products 12.2009
The VAC power supply wires (1.5 mm
2
) should be connected as illustrated in Fig.
19.
Careful attention should be paid to the correct connections of Vac power lines.
Fig. 19 VAC power connection
Wires pass through 20mm (cut-out) holes* at the top of the cabinet (see Fig. 20),
and continu
e behind the cabinet to pass through the rear-side cavity to the en-
trance hole (see Fig. 21 and Fig. 22) where they should be anchored securely be-
fore bein
g connected to the screw terminators.
Fig. 20 Top view of NE8000 cabinet
Input VAC
1.5 mm
2
wires
20mm hole
cut-outs