User Manual

Hardware installation
NE8000 cabinets
5
41
Building Technologies
A6V10062437_a_en
Fire Safety & Security Products 29.06.2012
Installation in Subsystem Housing Without DIN-Rail
NK823x can be installed without the plastic box using the specific mounting kits
available for CS11/CS440 and SI410. Note that the NKA8011-A1 mounting plate is
also needed together with the specific mounting kits.
NKA8011-A1 mounting plate
5.2 NE8000 cabinets
5.2.1 NE8000 hardware requirements
Environmental requirements
The cabinets for NK82xx should always be installed in a clean and safe
environment, away from dust, high temperature and humidity, vibrations and
impacts. Conditions and power supply should match the specific requirements
given in the Technical data section of the specific NK8000 datasheet.
NK8000 power requirements.
Item Power supply requirement
Input voltage 100-240 Vac, 50-60Hz
Input current 2A
NOTE:
A switch-box including a bipolar cut-out (phase + neutral) is required in the
electrical installation.