User Manual

ManualsBrandsSiemens ManualsFire - Special detectors and basesAutomatic fire detectors AnalogPLUS/SynoLOOP

Building Techno

logies

Control Products and Systems

DO113xA / DT113xA / DOT1131A

AlgoRex

Synova™

Automatic fire detectors

AnalogPLUS/SynoLOOP

l High degree of reliability and stability

l Individual identification of detectors

l High degree of operational reliability through signal processing in the detector

and in the control unit

l Built-in line disconnection function

l High resistance to

– electromagnetic interference

– humidity and corrosion

l Modern design

l Blend well with every room decor

l Environmentally safe material

– halogen-free plastic material identifiable through embossed code

– easy to uninstall and disassemble

l Comprehensive final examination and quality control

Summary of content (6 pages)

PAGE 1
DO113xA / DT113xA / DOT1131A AlgoRex Synova™ Automatic fire detectors AnalogPLUS/SynoLOOP l l l l l l l l l High degree of reliability and stability Individual identification of detectors High degree of operational reliability through signal processing in the detector and in the control unit Built-in line disconnection function High resistance to – electromagnetic interference – humidity and corrosion Modern design Blend well with every room decor Environmentally safe material – halogen-free plastic ma
PAGE 2
Smoke detectors DO1131A / DO1133A, AnalogPLUS/SynoLOOP wide spectrum l Uniform response behavior for different types of fire New, high performance optoelectronic sensor system l High resistance to soiling l l Function – The detector transmits the danger signal 'standard' and 'high sensitivity' to the control unit. The control unit evaluates as a default the danger signal 'standard'. Due to corresponding programming the danger signal 'high sensitivity' can be evaluated.
PAGE 3
l Application – DT1131A: For the monitoring of rooms and installations where in the event of fire, a rapid increase in temperature can be expected, or other types of detector cannot be used due to operational reasons. – DT1132A: For the monitoring of rooms and installations in which rate-of-rise heat detectors are unsuitable, e.g. with transient vapor or heat development.
PAGE 4
Dimensions Ø 115 47...70 Ø 115 47...70 Ø 115 47...70 51 DO113xA with base DB1131A 54.5 63 DOT1131A with base DB1131A DT1131A/32A with base DB1131A Technical data Operating temperature Storage temperature Humidity (no condensation) Protection category EN60529 / IEC529 Color Standards Approvals – VdS – LPCB Connection factor APMK Compatibility QS Standards DO1131A -25…+60 °C -30…+75 °C ≤95 % rel. IP44 DO1133A -10…+60 °C -30…+75 °C ≤95 % rel. IP44 DOT1131A -25…+60 °C -30…+75 °C ≤95 % rel.
PAGE 5
Details for ordering Type DO1131A DO1133A Part no BPZ:4790000001 BPZ:5016480001 Designation Smoke detector Smoke detector (for air-sampling smoke detection systems) DOT1131A BPZ:4790130001 Smoke detector DT1131A BPZ:4789910001 Heat detector DT1132A BPZ:5004870001 Heat detector Base and accessories see document 001035 Weight 0.160 kg 0.130 kg 0.150 kg 0.170 kg 0.
PAGE 6
Issued by Siemens Switzerland Ltd Building Technologies Division International Headquarters Gubelstrasse 22 CH-6301 Zug Tel. +41 41 724 24 24 www.siemens.com/buildingtechnologies Document no. 001331_p_en_-- Edition 2016-04-20 © Siemens Switzerland Ltd, 2015 Technical specifications and availability subject to change without notice.