Data Sheet for Product

ManualsBrandsSiemens ManualsFire - Detectors & PeripheralsDPU / DPU-C1 / DPU-PRT Device Programming / Test Unit, Data Sheet

Siemens Datasheet 6313

Smart Infrastructure – Building Products usa.siemens.com/fire

Data Sheet

Fire Safety Products

Device Accessories

Device Programmer / Test Unit

Models DPU, DPU-C1 and DPU-RPT

Product Overview

The Device Programmer / Test Unit (Model DPU) is a

powerful programming / test tool that expedites

installation of devices used on Siemens 50-point |

252-point | 504-point addressable systems, as well as

FireFinder and MXL panels.

A portable, compact and menu-driven component,

Model DPU programs addresses into FACP-compatible

devices, and tests them to ensure proper operation

prior to installation.

Prior to connecting a device circuit to the control

panel, the loop from Model DPU can be operated (AC

power must be used for this operation.)

This looping process shall allow for ground-fault

detection, as well as debugging the circuit.

Additional orderable parts include Model DPU-RPT,

which has a label printer and a larger carrying case

for Models DPU and DPU-PRT-CBL; as well as Model

DPU-C1, which is a carrying case for the Model DPU.

Specifications

Each device programmer / test unit electronically

programs the address for the device into its non-

volatile memory. Model DPU subsequently tests the

device’s functionality, assuring the installer the device

works properly prior to installation.

Model DPU has a liquid-crystal display (LCD) screen

with keypad that prompts the installer through an

easy-to-use program, and test menus that take little-

to-no-training for first-time users.

Model DPU is supplied with ‘NiMH’ rechargeable

batteries and an AC power supply, and will operate in

either battery or AC modes. The batteries are easily

exchanged with off-the-shelf Alkaline (AA) batteries.

To program and test a detector, simply insert the

detector in the integrated DB-11 base of Model DPU.

Enter the device address as prompted on the backlit

LCD display of Model DPU.

Device Programmer / Test Unit

Model DPU

• Programs and addresses devices compatible with

various Siemens ─ Fire Safety control panels

• Compact and portable

• Up to four hours continuous use on fully-charged

batteries

• FLASH memory for easy download and software

upgrades

• Operates with `NiMH’ rechargeable batteries

(included) or ‘AA’ Alkaline

• Auxiliary Current (AC) adaptor included

• Carrying case (DPU-C1) available, ordered separately

• Serves as a loop tester and ground-fault detector

• Works with optional label printer (DPU-RPT) to print

loop-detector addresses

• UL Listed, ULC Listed;

CSFM (

7272-0067:223 |

7300-0067:226 |

3240-0067:230)

Approved

ARCHITECT AND ENGINEER SPECIFICATIONS

Summary of content (2 pages)

PAGE 1
s Data Sheet Fire Safety Products Device Accessories Device Programmer / Test Unit Models DPU, DPU-C1 and DPU-RPT ARCHITECT AND ENGINEER SPECIFICATIONS • Programs and addresses devices compatible with various Siemens ─ Fire Safety control panels • Compact and portable • Up to four hours continuous use on fully-charged batteries • FLASH memory for easy download and software upgrades • Operates with `NiMH’ rechargeable batteries (included) or ‘AA’ Alkaline • Auxiliary Current (AC) adaptor included • Carryin
PAGE 2
Specifications – (continued) The address automatically increments to the next address for ease of addressing multiple devices, but the user can easily insert a different address if desired. The user also has the option of entering a loop number if they are printing labels at the same time. Using the optional label printer is a simple as programming Model DPU to the number of labels that are required.