Product Brochure

Product Specification Sheet #HD30.14 (page 2 of 2)
Catalog
Number Description
HFB21 Fusible 240 Volt Line Side Replacement Base (2) kits required per switch
HBB21 Fusible 240 Volt Load Side Replacement Base (2) kits required per switch
HFB612 Fusible 600 Volt Line Side Replacement Base (2) kits required per switch
HBB612 Fusible 600 Volt Load Side Replacement Base (2) kits required per switch
HNB612 Non-fusible Replacement Line Base (2) Kits required per switch
HHD61234 Replacement Handle/Handle Guard
HL612 Replacement Lugs (3 lugs per kit)
HM6123 Replacement Mechanism (2) kits required per switch
1
Replacement Door
Replacement Parts
Mechanical Lug Wire Ranges (60/75°C, Cu/Al)
Description Wire Range
Line, Load #12-6 AWG (Al) or
Neutral #14-6 AWG (Cu)
Ground #14-4 AWG
1
Catalog number is same as switch catalog number plus “DOOR” suffix.
2
If compression lugs are used for the neutral, order compression lug neutral barrier kit HCL612.
Compression Lugs (UL listed for field installation)
2
Wire
Burndy Thomas-Betts IIsco
Size CU Only CU/AL CU Only CU/AL CU Only CU/AL
60096
#14-10
60097
YA8C-L BOX 54104 60101 CRA-8 ACL-8
#8 YA8C-L1 BOX 54130 60102 ACN-8
61102
#6 61107
Catalog
Dimensions Wire Bending Space
Number A B C Top Bottom
DTF321R 29.14 23.50 29.63
4.75 7.50
(740) (597) (753)
DTNF361R 24.50 19.00 24.98
(622) (483) (634)
4.75 4.75
Dimension Drawing
C
L
2.09 (53)
Provision for HS
Type 3R Hub
B
2.44
(62)
6.75 (171)
3.375
(86)
C
L
(6) .268" (6.8)
diameter
mounting
holes
(2) knockouts
in back (1) in
each side for
1/2, 3/4 & 1"
conduit
1.65
(42)
1.65
(42)
.55 (14)
6.54
(166)
5.73
(146)
C
2.45
(62)
6.09
(155)
.94 (24)
.25(6)
2.06
(52)
16.44
(418)
Note: This
KO only
omitted on
Non-Fusible
Switches
.80 (20)
A
(OD Box
Less Cover)
1.13
(29)
This mounting
hole omitted
on DTNF361R
Dimensions and Wire Bending Space
Dimensions shown in inches and millimeters ( ).
Dimension shown accurate to
+
¹⁄₈ inch.
Enclosure: Galvanized Steel .053 Thick (17 Gauge)
Finish – ANSI Grey #61 Paint
11.65
(296)
C
L
2.00
(51)
2.00
(51)
(2) knockouts
for 1/2" conduit
(2) 1/2" knockouts
3.32
(84)
.97
(25)
1.00
(25)
1.00
(25)
9.53
(242)
1.69 (43)
(4) knockouts for
1/2, 3/4, 1" conduit
(62)
Siemens is a registered trademark of Siemens AG. Product names
mentioned may be trademarks or registered trademarks of their
respective copanies. Specifications subject to change without notice.
www.usa.siemens.com/switches
Siemens Industry, Inc.
Building Technologies Division
5400 Triangle Parkway
Norcross, GA 30092
1-800-964-4114
Subject to change without prior notice
All rights reserved
Printed in USA
© 2009 Siemens Industry, Inc.