Full Product Manual

Siemens Industry, Inc. SPEEDFAX™ 2017 Product Catalog
4-29
4
SAFETY SWITCHES
Product Category HDSS
Siemens / Speedfax Previous folio: 3-29 Updated by S Spencer 10-15-10
Description
Double throw switches are intended to transfer loads
from one power source to another. All 2 & 3-pole
double throw switches are suitable for use as service
equipment including non-fusible versions when used
in combination with a UL listed circuit breaker or fus-
ible switch. All are UL Listed and both horsepower
and load break rated. Switches are rated for use on
systems up to 10,000A when protected with Class
H fuses or 100,000A when protected with Class R or
Class T fuses
b
. They can also be used to connect a
single source of power to either of two loads. In
this application it is necessary to field modify fusible
switches so that the fuses are on the load side of the
switching mechanism.
A cover interlock is provided on all ampere ratings. The
operating handle may be padlocked in the off position.
Double Throw Switches
s Built to order. Allow 3–4 weeks for delivery.
a
Use HS Type hubs for 30–200A switches.
400A and larger switches do not have hub provisions.
b
All Heavy Duty double throw switches with a catalog
number starting with “DT” are rated 200,000 AIC max.
when protected by Class R, J or T fuses. Fuse ampere
rating must not exceed switch ampere rating.
c
Move load base.
d
Will accept class T Fuses only.
e
4-pole switches are not approved for service entrance.
f
Will accept class H fuses only.
g
General duty Stand-by Power Panel catalog number
DTLNF213NR contains (2) 100A, 2P circuit breakers
rated 120/240V AC & 10,000 AIC.
System Voltage
Number
of Poles Amps
Type 1 — Indoor Type 3R — Outdoor
a
Type 12/3R — Industrial Type 4X — Stainless Steel
Catalog Number Catalog Number Catalog Number Catalog Number
Heavy Duty Fusible (30-200A) with Class H fuse spacings —Less Neutral
b
240
Volt AC
or
250
Volt DC
2 200
DTF224
s DTF224R — —
30
DTF321 DTF321R
s — —
60
DTF322 DTF322R
s — —
3
100
DTF323
s DTF323R — —
200
DTF324 DTF324R — —
400
DTF325 FR325DTK
f
s — —
600
DTF326
s FR326DTK
d
s — —
600
Volt AC,
250
Volt DC
30
DTF361 — — —
60
DTF362
s — — —
3 100
DTF363 DTF363R — F353SSDTK
f
s
200
DTF364 DTF364R — F354SSDTK
f
s
400
DTF365 FR355DTK
d
s — F355SSDTK
d
s
Heavy Duty Non-Fusible —Less Neutral
b
240
Volt AC
or
250
Volt DC
30
DTNF221 — — —
60
DTNF222 — — —
2 100
DTNF223 — — —
200
DTNF224 DTNF224R — —
400
DTNF225 DTNF225R — —
30
DTNF321 — — —
60
DTNF322 — — —
100
DTNF323 DTNF323R — —
3 200
DTNF324 DTNF324R — —
400
DTNF325 — — —
600
DTNF326 — — —
800
DTNF327
s — — —
600
Volt AC,
or
250
Volt DC
30
DTNF361 DTNF361R DTNF361J DTNF361S
60
DTNF362 DTNF362R DTNF362J DTNF362S
100
DTNF363 DTNF363R DTNF363J DTNF363S
3 200
DTNF364 DTNF364R DTNF364J
s DTNF364S
400
DTNF365 DTNF365R NF355HDTK NF355SSDTK
600
DTNF366 DTNF366R — —
800
DTNF367 DTNF367R — —
1200
DTNF368
s DTNF368R — —
30
— NFR451DTK
s — —
60
— NFR452DTK
s — —
100
— NFR453DTK
s — —
4
e
200
NF454DTK NFR454DTK
s — NF454SSDTK s
400
NF455DTK
s NFR455DTK s — —
600
NF456DTK
s NFR456DTK s — —
800
NF457DTK
s NFR457DTK s — —
General Duty Non-Fusible
Type 3R — Outdoor
a
Less Neutral
Type 3R — Outdoor
a
With Neutral
Type 3R — Outdoor General
Duty With Neutral
g
240
Volt AC
2
100
DTGNF223R DTGNF223NR DTLNF213NR —
200
DTGNF224R DTGNF224NR — —
3
100
DTGNF323R DTGNF323NR — —
200
DTGNF324R DTGNF324NR — —
Amp
Rating
Fuse Capabilities of Fusible DTF Switches
Fuse Type
H R T J
30 & 60A, 240V Std Yes (kit) No No
30 & 60A, 600V Std Yes (kit) No Yes
c
100 & 200A Std Yes (kit) Yes (kit) Yes
c
400 & 600A (DTF) No No Yes
c
Std
Special Application Safety Switches Dimension Drawings
Double Throw Selection