Data Sheet for Application

Application Sheet
CBP002/CBP002_H
Passive chilled/heating beam (2 pipe) with changeover on triac
output
DXR2..09T-101A
4 / 6
Technical information in this document are subject to change. Drawings serve illustration purposes only.
Siemens is not responsible for content and any manual modifications.
2021-08-26
A6V10662233_en--_c_--_09
Application
configuration
Equipment
Values/Range
Template settings
On-board output
Chilled/heating beam valve position 1
Chilled; Y1, Y2; 3-position
Chilled; Y3, Y4; 3-position
Chilled; Y1; Pulse width modulation thermal
Chilled; Y4; Pulse width modulation thermal
Heating/chilled 2-pipe; Y1, Y2; 3-position
Heating/chilled 2-pipe; Y3, Y4; 3-position
Heating/chilled 2-pipe; Y1; Pulse width
modulation thermal
Heating/chilled 2-pipe; Y4; Pulse width
modulation thermal
Heating; Y1, Y2; 3-position
Heating; Y3, Y4; 3-position
Heating; Y1; Pulse width modulation thermal
Heating; Y4; Pulse width modulation thermal
Chilled beam passive; Y1, Y2; 3-position
Chilled beam passive; Y3, Y4; 3-position
Chilled beam passive; Y1; Pulse width
modulation thermal
Chilled beam passive; Y4; Pulse width
modulation thermal
Heat/chilled beam passive 2-pipe; Y1, Y2; 3-
position
Heat/chilled beam passive 2-pipe; Y3, Y4; 3-
position
Heat/chilled beam passive 2-pipe; Y1; PWM
thermal
Heat/chilled beam passive 2-pipe; Y4; PWM
thermal
Heat/chilled beam passive
2-pipe; Y1, Y2; 3-position
KNX PL-Link devices
Room operator unit device 1
QMX3.P02, QMX3.P34, QMX3.P36, QMX3.P37,
QMX3.P74
QMX3.P34