Assortment / System Description

VAV application
Electric reheater
18
A6V10866237_en--_b_08 143 | 275
A binary overtemperature (open contact) protection can be connected on the
DXR2 for all versions of the electric reheater application. The application
switches off the electric reheater at device protection priority if
overtemperature protection is enabled.
Description Name Default value
Enable overtemperature input
0:No
1:Yes
EnOvrTDetIn 0:No
WARNING
Electric heat coils require safety limit thermostat
Improper installation of electric heating coils can result in fire and cause
destruction of life and property.
Install a high temperature cut-out switch on all electric heating elements.
Ensure that all wiring and installation conform to applicable safety codes
and regulations.
Safety thermostat